Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Press the List button once or twice to display menu options. b. Press buttons 2, 4, 8, 6, #, * (in that order) to get into Edit mode. c. Use up/down arrows and then press Select to change ZigBee channel. d. Press List button to exit Edit mode and save changes. Program the Programmable Buttons On the Remote Control Version RC200, you can program 6 soft buttons (Red, Green, Yellow, Blue, *, and #) to perform programmed activities. These buttons can be programmed to execute any of the AV device’s macros or IR codes. Program these options using the AV device property page. 1 Start Composer and connect to a Director. 2 Ensure the System Design view is selected. 3 Ensure that you have the following devices in your project: • Controller • Remote Control RC200 • An AV device to be controlled 4 Select Connections view. 5 On the Network tab, ensure the controller and the Remote Control are both network identified (have a network address). 6 Program the programmable buttons (Red, Green, Yellow, Blue, *, or #) either based on the selected AV device or the selected room. Based on AV Device (pictured): a. Select System Design view. b. Select an AV device to display the device’s Properties page. c. On the device’s Properties page, choose Code or Macro for the button you want to program, then choose a code or macro from the drop-down list, edit Help text as needed, and then choose Set. Note: Help text describes custom programming to end-users under the House option in any of the system navigation devices. For example: (1) In System Design view, select Disc Changer. (2) Under Red button, choose Code. (3) From the drop-down list, choose Subtitle. (4) Choose the Set button to create a Subtitle button. Based on Room (not pictured): a. Select Programming view. b. Select a room in the Device Events pane. c. Select the Commands radio button in the [Room] Events pane. d. Use the drop-down menu to select a command or button (such as “Blue Button”). e. Build the script using items from the Action pane to program the actions desired in the room selected when the selected command or button is used. For more on programming, refer to the Composer Help file. Program the Remotes Paging Feature You can configure the Beep paging feature of this remote through programming, This feature can be used to page a lost remote. A keypad or custom button can be programmed to cause the remote to beep when pressed. This would allow the user to find the lost remote. To program the paging feature for this remote: 1 Start Composer and connect to a Director. 2 Select the Programming view. 3 Select the Event that you want to use to start the page. For example, to select a a keypad button press, first select the keypad under the Device Event section (on the left), then select the button under Events. 4 In the Actions list (on the right), select Remote Control RC200. 5 In the Commands list, choose an action for the remote and then double- click the green arrow to add the action to the script. • Beep until button press—The remote will beep until you press one of its buttons. • Beep for X seconds (<254)—The remote will beep until X seconds have elapsed or you press one of its buttons. • Stop Beep—The remote will stop beeping. Regulatory Compliance FCC FCC ID: R33C4SR250Z This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. IMPORTANT! Changes or modifications not expressly approved by Escient could void the user’s authority to operate the equipment. Important ! Les changements ou les modifications pas expressement approuves par Escient ont pu vider l'autorite de l'utilisateur pour actionner l'equipement. Wichtig! Die anderungen oder anderungen nicht ausdrucklich genehmigt durch Escient konnt...