Votos - 4, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Please read both manuals in their entirety before operating the Dynamic Dolphin Remote or your power chair. This manual is intended as a supplement to the in-service training provided by your authorized provider. If you have any questions or problems regarding the Dynamic Dolphin Remote, please contact your authorized provider. Copyright © 2001 Pride Mobility Products Corporation DoIphin Basic Operation Instructions з _TABLE OF CONTENTS_ INTRODUCTION................................................................................4 Dynamic Dolphin Remote.........................................................................4 MAGNETIC KEY LOCK SYSTEM...............................................6 JOYSTICK OONAPU........................................................................6 DRIVE PROGRAM SELECTION...................................................6 ACTUATOR CONTROL....................................................................7 4 Basic Operation Instructions Dolphin INTRODUCTION Welcome to Quantum Rehab, a division of Pride Mobility Products Corporation (Pride). Quantum Rehab is dedicated to the customization of power chairs for users with advanced rehabilitation and mobility issues. Quantum Rehab also expands possibilities for enhanced healthcare attendant control over power chair functions to provide a secondary level of support for our customers where necessary. Dynamic Dolphin Remote The Dynamic Dolphin Remote is a DX compatible control unit complete with a joystick, fully functional keypad, and the capability to support up to five different drive programs and several actuator functions. This manual is designed to explain basic operation for the following functions available with the Dolphin Remote: 1. Magnetic Key Lock System - The user can lock the power chair to prevent unintended use of the chair. 2. Joystick OONAPU - OONAPU stands for “Out Of Neutral At Power Up.” This is a safety measure designed to prevent unintended movement of the power chair. 3. Drive Program Selection - The user can choose from one of five programs to control the movement and speed of the power chair. 4. Actuator Control - The user can control up to five actuators using the Dolphin Remote. Figure I provides information on the Dynamic Dolphin Remote components and connections. Use this diagram to familiarize yourself with the function and location of each component before using the Dynamic Dolphin Remote. Dolphin Basic Operation Instructions б i— Status LED 0 Indicates On/Off Status, and ] flashes to indicate system faults. Vo On/Off Switch _J Toggles the system on or off. Battery Gauge A series of ten LEDs, which indicate charge level Left & Right Indicator Switches & LEDs Press the appropriate switch to activate Oo turn indicator. Press again to turn off. LED flashes when activated. 01 Drive Program Display A 7-segment display shows the currently selected drive program. U- Remote Status LED Indicates status of Dolphin Remote. Drive Program Select Switch This switch will scan through and select one of five drive programs. Hazard Light Switch & LED Press to make both indicators flash simultaneously. Press again to turn off. LED flashes when activated. Horn Switch Press to activate warning horn. Light Switch & LED Toggles the head/tail/side lights on or off. LED is lit when activated. ® is m 0 m seat height leg rest adjust back tilt seat tilt (right & left) Actuator Select Switches 5 switches for actuator selection. Not used for actuator operation, only selection. LED above switch lights up when activated. Magnetic Key Lock & LED > Locks DX System to prevent unauthorized use....