Votos - 3, Puntuación media: 4.3
(
)
)
|
Resumen del manual
¦ The model number label is located inside the control box of your operator. ¦ ¦¦ Serial # ¦ ¦¦ Installation Date TABLE OF CONTENTS 2-7 INTRODUCTION 2 Safety Symbol and Signal Word Review 3 Operator Specifications 4-5 Safety Installation Information 6 Carton Inventory 6 Hardware Inventory 7 Additional Items for Purchase 7 Tools Needed 8-12 PREPARATION AND OVERVIEW 8 Single Gate Overview 9 Dual Gate Overview 10 Check Your Gate 11 Mounting Options 12-21 INSTALLATION 12-18 Attach the Operator to the Gate 19-20 Mount the Control Box 21-22 WIRING 21-23 Connect Gate Operator (Gate 1) to Control Box 24-26 Connect Gate Operator (Gate 2) to Control Box (Model LA412-S Only) INTRODUCTION 27-32 SOLAR PANEL INSTALLATION 27 Select Site for Solar Panel(s) 28 Overview of Solar Panel Installation 29 Position Solar Panel(s) 30 Position Solar Bracket 30 Insert Mounting Bolts 30 Secure Solar Panel(s) to Solar Bracket 30 Mount Solar Panel(s) Assembly 31 Connect Solar Panel(s) to Operator Control Box 32 Connect Batteries 33-36 PROGRAMMING 33-34 Program Limits 35 Force and Timer To Close 36 To Add or Reprogram a Remote Control 36 To Add a Wireless Keyless Entry 36 To Erase All Codes 37-43 OPERATION AND MAINTENANCE 37 Important Safety Information 37 Using Your Gate Operator 37 Manual Release 37 Maintenance 39 Wiring Diagram 40 Diagnostic Chart 41-43 Troubleshooting 44-45 REPAIR PARTS 46 ACCESSORIES 47 WARRANTY 47 REPAIR PARTS AND SERVICE BACK TEMPLATE FOR POST BRACKET MOUNTING Safety Symbol and Signal Word Review This gate operator has been designed and tested to offer safe service provided it is installed, operated, maintained and tested in strict accordance with the instructions and warnings contained in this manual. WARNINGWARNING Mechanical WARNINGWARNING Electrical CAUTIONCAUTION Introduction When you see these Safety Symbols and Signal Words on the following pages, they will alert you to the possibility of serious injury or death if you do not comply with the warnings that accompany them. The hazard may come from something mechanical or from electric shock. Read the warnings carefully. When you see this Signal Word on the following pages, it will alert you to the possibility of damage to your gate and/or the gate operator if you do not comply with the cautionary statements that accompany it. Read them carefully. IMPORTANT NOTE • BEFORE attempting to install, operate or maintain the operator, you must read and fully understand this manual and follow all safety instructions. • DO NOT attempt repair or service of your commercial door and gate operator unless you are an Authorized Service Technician. 2 Operator Dimensions and Specifications Main Supply 12VDC Battery run. Operational between 11.5VDC and 14.5VDC. Accessory Power 12V nominal Class II battery voltage source is limited to: • Solar or AC Cable up to 50' - 500 mA • AC Cable 50' up to 250' - 250mA • AC Cable 250' up to 1000' - 100mA NOTE: Increased accessory power drawn from the operator will shorten the battery life. Battery Charger Supply (Optional) 14.5Vac nominal, 30 VA max. Maximum Gate Length and Weight 16 ft. at 550 lbs. Temperature -20°C to +50°C (-4°F to 122°F) Protection Fuse Battery 1 ATC 20A Protection Fuse Battery 2 ATC 20A Weight: 47 lbs. (21 kg) 10" (25.4 cm) 14" (35.6 cm) 6" (15.2 cm) 36.3" (92.1 cm) .475" DIA. (1.2 cm DIA.) 4.50" (11.2 cm) .250" (0.635 cm) 37.4" (95.0 cm) 4.00" (10.2 cm) 53.5" (136.0 cm) 3 Introduction 1. READ and FOLLOW all instructions. 2. The gate operator is intended for use with Class I vehicular swing gates. Class I denotes a vehicular gate operator (or system) intended for use in a home of one to four single family dwellings, or a garage or parking area associated therewith. Install the gate operator only when the operator is appropriate for the construction and the usage class of the gate. 3. Gate operating system designers, installers and users must take into account the possible hazards associated with each individual application. Improperly designed, installed or maintained systems can create risks for the user as well as the bystander. Gate system design and installation must reduce public exposure to potential hazards. Install the gate operator only when the operator is appropriate for the construction of the gate and the usage class of the gate. All exposed pinch points must be eliminated or guarded. 4. A gate operator can create high levels of force during normal operation. Therefore, safety features must be incorporated into every installation. Specifi c safety features include safety sensors. 5. The gate must be properly installed and work freely in both directions prior to the installation of the gate operator. 6. The gate must be installed in a location so that enough clearance is provided between the gate and adjacent structures when opening and closing to reduce the risk of entrapment. Swinging gates shall not open into public access areas. 7. The operator is intended for use only on gates used for vehicles. Pedestr...
Otros modelos de este manual:La puerta automática - LA412-S (7.84 mb)