Carefully read and follow the guidelines in this manual giving special attention to the CAUTION and WARNING statements. Keep this manual for reference should troubleshooting be necessary. CAUTION statements provide information that could damage your inverter or equipment connected to it. WARNING statements provide information on conditions that could result in personal injury or loss of life. WARNING: Incorrect installation or misuse of the RPPD100D could result in personal injury or damage to t

Please read and understand all of the information provided in this manual before operating or installing. If properly used, the inverter will give you years of reliable service providing AC power for TVs, computers, appliances, stereos and power tools. For safe and optimum performance, the inverter must be installed and used properly. Carefully read and follow the guidelines in this manual giving special attention to the CAUTION and WARNING statements. Keep this manual for reference should troub

Cooler areas are best. 3. VENTILATION: Allow at least 4 inches of clearance above and around all sides and top of the unit for proper cooling. 4. SAFE: DO NOT install the RPPD2000 in a compartment with batteries or flammable liquids or vapors such as gasoline or propane. 5. CLEAN: DO NOT install the RPPD2000 in an area that is prone to dirt, dust or debris. This is especially important if used in a work environment. Connecting DC Power Cables: Red +, Black – (included with inverter) 1. Reversing

Helpful Formulas: To Convert AMPS to WATTS: AMPS X VOLTS = WATTS To Convert WATTS to AMPS: WATTS . VOLTS = AMPS These formulas yield a close approximation of the continuous loads of a product. T TTo oo c cca aal llc ccu uul lla aat tte ee a aap ppp ppr rro oox xxi iim mma aat tte ee S SSt tta aar rrt ttu uup pp L LLo ooa aad dd: :: Multiply: WATTS X 2 = Starting Load This formula yields a close approximation of the starting load of the appliance, although some may require an even greater startin

Location of the Radiant Surface Elements and Controls Figure 1 NOTE: Please read detailed instructions for ceramic glass cooktop cleaning in the General Care & Cleaning section and Before You Call checklist section of this Use and Care Guide. NOTE: Radiant elements have a limiter that allows the element to cycle on and off, even at the HI setting. This helps to prevent damage to the ceramic cooktop. Cycling at the HI setting is normal and will mostly occur if the cookware is too small for the ra

Set up and Use Precautions Set up only according to these in1. structions. Improper set up can create hazards. Wear ANSI-approved safety goggles 2. and heavy-duty work gloves during set up. Keep area clean and well lit.3. Do not set up when tired or when 4. under the influence of alcohol, drugs or medication. This product is not a toy. Do not al5. low children to play with or near this item. Use as intended only.6. Inspect before every use; do not use 7. if parts are loose or damaged. Maintain p

Surfaces How to Clean Aluminum (Trim Pieces) Use hot, soapy water and a cloth or paper towel. Dry with a clean cloth. Painted and Plastic For general cleaning, use hot soapy water and a cloth. For more difficult soils and Control Knobs, Body Parts, built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to and Decorative Trim 60 minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these materials; they can scratch or dull the finish. Sta

ELI T E ® Gas ar e Estufa a as Models, Modelos 790.7942 *, 7944* * = color number, ntJmero de color Sears Roebuck and Co., Hoffman Estates, {L 60179 U.S.A. pin 316417324 (0606) Table of Contents Freestanding Range Warranty ................................................. 2 , Setting Preheat .................................................................. 21 IMPORTANTSAFETYINSTRUCTIONS..................................... 3-5 , Setting Bake .....................................................

3). Fig. 2 When PRE disappears from the display, the oven set temperature has been reached. Once the oven has preheated, PLACE FOOD IN THE OVEN. Press _To_ when baking is complete or to cancel the Preheat featu re. To change Preheat temperature while oven is preheating (example changing from 350 to 425°F): (f it is necessary to change the preheat temperature while the oven is preheating to the original set temperature: 1. While preheating, press @ again. (See Fig. 3) Fig. 4 2. Enter the new preh