Votos - 5, Puntuación media: 3.8
(
)
)
|
Resumen del manual
• Disconnect the base from the modular jack and plug in a corded telephone. If calls are still not clear, the problem is probably in your wiring or local service. Call your local telephone service company. 32 91-000197-010-000_E5925B_R1.qxd 2/13/1950 7:21 PM Page 33 Appendix In case of difficulty Incomplete messages • If a caller leaves a very long message, part of it may be lost when the system disconnects the call after 4 minutes. • If the caller pauses for more than 7 seconds, the system stops recording and disconnects the call. • If the system’s memory becomes full during a message, the system stops recording and disconnects the call. Difficulty hear • Press ^ on the base to increase speaker volume. ing messages System does not answer after correct number of rings • Make sure that the answering system is on. • If Toll Saver is activated, the number of rings changes to 2 when you have new messages waiting (see page 26). • In some cases, the system may be affected by the ringing system used by the local telephone company. • If the memory is full or the system is off, the system will answer after 10 rings. “CL” flashes in • You need to reset the answering system clock (see page 23). message window System does not respond to remote commands • Make sure to enter your remote access code correctly (see page 30). • Make sure you are calling from a touch-tone phone. When you dial a number, you should hear tones. If you hear clicks, the phone is not a touch-tone telephone and cannot activate the answering system. • The answering system may not detect the remote access code while your announcement is playing. Try waiting until the announcement is over before entering the code. • There may be noise or interference on the phone line you are using. Press dial-pad buttons firmly. Announcement • When you record your announcement, make sure you speak in a message is not normal tone of voice, about nine inches from the base. clear • Make sure there is no background noise (TV, music, etc.) while you are recording. 33 91-000197-010-000_E5925B_R1.qxd 2/13/1950 7:21 PM Page 34 Appendix Technical specifications RF Frequency Band 2400 MHz — 2483.5 MHz (Handset to base) RF Frequency Band 5725 MHZ — 5850 MHz (Base to handset) Channels 95 Channel Spacing 864 KHz Output Power 20 dBm Sensitivity -96 dBm Modulation GFSK Operating Temperature 32°F — 122°F 0°C — 50°C Base Unit Voltage (AC Voltage, 60Hz) 96 — 130 Vrms Base Unit Voltage (AC Adapter Output) 9VDC @600mA Handset Voltage 3.2 — 4.7 VDC 700mAH Charger Voltage 9VDC @150mA (AC Adapter Output) 34 91-000197-010-000_E5925B_R1.qxd 2/13/1950 7:21 PM Page 35 Appendix Index A Low battery, 7 AC adapter, 6 M Alert tones, 31 Making calls, 10 Answering calls, 10 Menus, 2 Answering system, 22-30 Messages, 22-30 B Mute, 11 Battery charging, 7 N Battery installation, 7 Belt clip, 9 Names, enter into phone book, 17 C search for, 18 Call Forward, 13 O Call Transfer, 13 Caller ID, 20 Operating range, 5 add entries to phone directory, 21 P delete entries, 21 dial entries, 21 CID, 20 Phone book, 16 dial number, 19 edit entries, 19 D name search, 18 Delete Call Log entries, 21 Delete redial entries, 10 new entries, 17 Problems, 32 Dialing, Q from a CID record, 21 phone book dialing, 19 Quick reference guide, 2-3 E R Elapsed time, 10 Ending calls, 10 Receiving calls, 10 Recharging, 7 Redial, 10 F Ring silencing, 11 Flash (switchhook flash), 11 Ring tone options, 14 H S Hands-free use, 10 Handset locator, 10 Headset, 9 Search for name, 18 Speakerphone, 10 Switchhook flash, 11 I T Incoming call log, 20 Incoming calls, answering, 10 Technical specifications, 34 Troubleshooting, 32 Indicator lights, 31 V L Volume controls, 11 Last number redial, 10 35 91-000197-010-000_E5925B_R1.qxd 2/13/1950 7:21 PM Page 36 Appendix Remote access wallet card Your package includes a handy wallet card to help you remember access commands you can use to control your answering system from any touch-tone telephone. If you misplace this card, just clip and save the card below. Cut along dotted line. Fold here. Action Remote Command Voice help menu ......................#1 Play messages ............................#2 Repeat message ........................#4 Skip message ..............................#6 Stop..............................................#5 Save messages............................Hang up. Delete message ........................#9 while message plays. Review announcement ............#7 Record announcement ............*7 speak after beep. #5 to stop. Record memo............................*8 speak after prompt. #5 to stop. End remote access call ............*0 (or hang up). Turn system off ........................#0 (enter again to turn on). Turn system on ........................If off, system answers after 10 rings. Enter your access code, then press # 0 to turn system on. Call your phone number, then enter your 2-digit access code (preset to 19). 5.8 GHz Cordless Telephone/Answering System E5925B Copyright ©...