Votos - 3, Puntuación media: 3.7
(
)
)
|
Resumen del manual
• Check that no metal objects (coins, tools, etc.) are left inside the unit to avoid short circuits. • If you smell or see smoke, turn the power off immediately and consult your Kenwood dealer. • Do not touch the unit during use because the surface of the unit becomes hot and may cause burns if touched. 2CAUTION Take the following precautions to keep the unit in proper working order. • Be sure the unit is connected to a 12V DC power supply with a negative ground connection. Accessories External Number Part name View of Items Terminal cover 1 (Power terminal) Self-tapping screws 6 (o5 . 18 mm) Grommets 1 2 English • Do not open the • Do not install the exposed to direct sunlight, humidity, water may splash over dust exists. NOTE • If you have difficulty in installing this in your vehicle, contact your Kenwood dealer. Cleaning the unit • If the surface is dirty, wipe it clean with a silicon cloth or soft dry cloth with the power off. 2CAUTION Do not use hard cloths or paint thinner, alcohol, or other volatile solvents. These may damage external surfaces or remove indicator characters. Par t name Round terminal (Large) External V iew Number of Items 1 Round terminal (Medium) 2 Round terminal (Small) 1 Installation procedure Since there are the instruction manual 1. Remove the ignition key - terminal of the battery short circuits. 2. Set the unit according to the 3. Connect the input and output 4. Connect the speaker cables and 5. Connect the power cable, power control 6. Install the unit in the car. 7. Connect the negative - terminal of the battery. 2CAUTION • If sound is not output normally, immediately turn power off and check connections. • Be sure to turn the power off before changing the • If the fuse blows, check cables for shorts, then replace • Check that no unconnected cables or connectors are touching Do not remove caps from unconnected cables or connectors to prevent • Connect the speaker cables to appropriate speaker connectors Sharing the negative cable of the speaker or grounding speaker cables to cause this unit to fail. • After installation, check that the brake lamps, winkers, and wipers Installation Self-tapping screw (o5 . 18 mm) Installation board, etc. (thickness : 15 mm or more) • Since the power amplifier has no parts which require operation, it can be installed at a position away from the driver’s seat without any hindrances. As generally accepted positions for its installation, places such as inside the trunk, etc. can be considered. • Use the extension cables. (Optional.) Type Length 0.5m 1m 2m 4m 5m 6m RCA cable CA-2SL CA-12SL CA-22SL CA-52SL RCA cable (o7mm) CA-3WL CA-13WL CA-23WL CA-53WL RCA cable (o12mm) CA-5W CA-15W CA-25W CA-45W CA-65W 2CAUTION • Do not install the unit under the carpet. Otherwise heat build-up occurs and the unit may be damaged. • Install this unit in a location which allows heat to easily dissipate. Once installed, do not place any object on top of the unit. • This unit has cooling fans to decrease the internal temperature. Be careful not to block the cooling fan openings when installing the unit. Blocking these openings will inhibit the cooling of the internal temperature and result in malfunction. • After installing the unit, check to make sure that electrical equipment such as the brake lamps, turn signal lamps and windshield wipers operate normally. • Install the unit securely in a location that does not interfere with driving. English 3 Controls This is a 4 channel amplifier including 2 stereo amplifiers in a body. One amplifier is referred to as amplifier A and the other is amplifier B. This unit is compatible with a large variety of systems by combining the switches and functions described in the following. 1 2 3456 I I . I 25Hz INFRASONIC FILTER OFF OPERATION MONO STEREO OPERATION MONO STEREO 25Hz INFRASONIC OFF LPF OFF HPF FILTER LPF OFF HPF INPUT SENSITIVITY( V) 0.2 5 0.5 12 FREQUENCY( Hz) FREQUENCY( Hz) 50 70 100 LPF 200 170 120 70 150 120 100 150 3 4 INPUT SELECTOR BA A ( MAX) ( MIN) INPUT SENSITIVITY( V) 0.2 5 0.5 12 3 4 ( MAX) ( MIN) 50 70 100 LPF 200 170 120 150 25Hz 15Hz INFRASONIC FILTER OFF OPERATION MONO STEREO LPF OFF HPF CONTROL INPUT SENSITIVITY( V) 0.2 5 0 5 12 50 70 100 LPF 200 170 120 50 70 200 HPF 150 3 4 INPUT SELECTOR B A A A ( MAX) ( MIN) OPERATION MONO STEREO 25Hz 15Hz INFRASONIC OFF FILTER LPF OFF HPF INPUT SENSITIVITY( V) 0.2 5 0.5 12 3 4 ( MAX) ( MIN) CONTROL B 50 70 100 LPF 200 170 120 50 200 150 120 100 HPF 150 7 # $ % ^ & * ( 8 9 0 ! @ Amplifier A Amplifier B I I ED BACK I SPEAKER OUTPUT FUSE( 0A. 4) BATT. GND BB B A A A S 20202020 1 Cooling fans When the internal temperature of the amplifier rises, the cooling fans are activated automatically to drop the temperature. In certain situations, the cooling fans may be operating from the beginning of the amplifier operation. 2 RCA cable ground lead terminal 3 Amplifier A LINE IN terminal 4 Amplifier B LINE IN terminal 5 LINE OUT terminal These jacks output respectively the signal...