Votos - 4, Puntuación media: 3.8
(
)
)
|
Resumen del manual
Turn to off for no effect. 10) Power LED: Illuminates when power is switched on. 11) Master: Adjusts overall volume. 1) Power Switch: Switches amplifier on/off. 2) Voltage Selector: AC 110/220 Volt Selectable Switch. 3) Power Cord: Connect the included power cord here. Plug in to a grounded power outlet only! 4) Phones: This is your headphone connection. Inserting the headphones disables the internal speaker(great for practicing). A 5) Line Out: Lets you output a line level signal (non-amplif ied). Internal speaker is not disabled. 6) Return: Use this jack to bring back processed signal (see 7). 7) Send : This jack lets you insert an effects processor into the signal path. 8) Reverb Remote : Connect a f ootswitch (not included) to remotely switch on/off the internal reverb effect. Distorted Sound: Check if the amplifier is overdriven. If it is, you will have to turn the level down. Check signal source. Check distortion effect control. Turn to off for no effect. Signal sounds discolored: Check and adjust the EQ settings. Ensure you are using quality cables. Check signal source. No Sound: Check connections. Try a different cable. Check levels on amplifier. Confirm amplifier is getting a signal. Make sure nothing is plugged into the Phones jack. Intermittent Output: Check connections. Try a different cable. Specif ications Model Driver RMS Peak Dimensions Weight GA810 12" High Definition Speaker 80W 800W W= 16 1/5" H = 18 3/4" D= 11" 30.86 lbs y...