Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
Users of our previous 59LG-series and 52-series chains will find it easy to make the switch. 58J, 58L, 59J, and 59L all feature a fast-working new chisel cutter that delivers performance superior to its predecessors in all cutting modes. The new cutter is mounted on our proven unequal-pitch 59 chassis for an unmatched combination of performance and durability. Oregon® 58/59 Super Guard® gives professional timber cutters who use .404”-pitch chains what they want: out- of-the-box sharpness, high performance, resistance to stretch, and consistency from chain to chain. These chains feature ramped depth gauges to reduce kickback energies, and are recommended for cutting clean wood with saws 4.0 cubic inches (65cc) and larger, and with bars 20" (50cm) and longer. Safety / ANSI: 58J, 58L, 59J, and 59L are yellow-label chains with kickback-reducing features. These chains do not meet the kickback requirements for low-kickback chains. Recommended Use: Professional use by loggers and forest firefighters who prefer large saws and .404”-pitch chain. FEATURES BENEFITS • Chisel cutters, factory ground with • Superior cutting speed (nose-clear, nose-buried, optimum angles and boring) • Smooth, easy cutting, minimal feed force required, minimizes operator fatigue • Sharpens with a 7/32” round file • Easy filing and maintenance • Depth gauge is ramp-shaped, • Reduces roughness and kickback energies and offset without affecting performance • Clean-ground gullet • Maximum chip flow, helps prevent clogs from debris • No out-of-the-box filing is needed • Top-plate-angle • Easy, consistent sharpening witness mark • Lubrilink™ tie straps • Improved chain and bar lubrication • More oil stays where it’s needed – on the chain • The volume of oil required is reduced • Long, high-strength cutter top plate • Long working life, durable, resists breakage • Made from patented OCS-01 steel-alloy • Tougher than the steel on other chains, 20% tougher material (U.S. patent no. 5,772,957) at room temperature, 125% tougher at minus 20° F. Because every cut counts 59L F&B A107035 AB 0301 CHAIN PART CUTTER CUTTER KICKBACK-REDUCING NUMBER PITCH GAUGE SEQUENCE TYPE FEATURES 58J .404” .058” Skip Chisel Ramp-shaped 58L .058” Standard Depth Gauges 59J .063” Skip 59L .063” Standard FILING INSTRUCTIONS FOR 58J, 58L, 59J, AND 59L CHAINS FILE SIZE: Use a 7/32" round file and file guide. TOP-PLATE TOP-PLATE DEPTH-GAUGE SETTING: CUTTING ANGLE: SIDE-PLATE ANGLE: FILING ANGLE: FILE-GUIDE ANGLE: *See warning below .025" 60° 60° 25° 10° Oregon® .404”-pitch Super Guard® chains (58J, 58L, 59J, and 59L) may be capable of kickback that could result in serious injury to the saw operator or bystanders. Although these chains have features designed to reduce kickback energy, they are NOT low-kickback chains. Do not use Oregon® 58J, 58L, 59J, or 59L unless you have experience and specialized training for dealing with kickback. Saw chain with lower kickback potential is available. Failure to follow filing instr...
Otros modelos de este manual:Benzo y sierras - Super Guard 58L (49.09 kb)
Benzo y sierras - Super Guard 59J (49.09 kb)
Benzo y sierras - Super Guard 59L (49.09 kb)