Votos - 3, Puntuación media: 3.7 ( )

Fabricar: Homelite Tamaño del archivo: 657.9 kb Nombre del archivo: Idioma del manual:

¦ ¦¦¦¦¦Mix fuel outdoors where there are no sparks or flames. ¦ ¦¦¦¦¦Select bare ground, stop the engine, and allow it to cool before refuelling. ¦ ¦¦¦¦¦Loosen the fuel cap slowly to release pressure and to keep fuel from escaping around the cap. ¦ ¦¦¦¦¦Tighten the fuel cap securely after refuelling. ¦ ¦¦¦¦¦Wipe spilled fuel from the unit. Move 15 m (50 ft.) away from refuelling site before starting engine. ¦ ¦¦¦¦¦Never attempt to burn off spilled fuel under any circumstances. BASIC PRECAUTIONS IN THE CUTTING/ WORK AREA ¦ ¦¦¦¦¦Do not operate a chainsaw in a tree. ¦ ¦¦¦¦¦Do not cut from a ladder: this is extremely dangerous. ¦ ¦¦¦¦¦Keep bystanders and animals out of the work area. Do not allow other persons to be nearby during starting or cutting with the chainsaw. NOTE: The size of the work area depends on the job being performed as well as the size tree or workpiece involved. For example, felling a tree requires a larger work area than making other cuts such as bucking cuts etc. PUSH AND PULL The reaction force is always opposite to the direction the chain is moving. Thus, the operator must be ready to control the PULL when cutting on the bottom edge of the bar and the PUSH when cutting along the top edge. NOTE: Your chainsaw has been fully factory tested. It is normal to find some slight oil residue on the saw. MAINTENANCE PRECAUTIONS Never operate a chainsaw that is damaged, improperly adjusted, or is not completely and securely assembled. Be sure that the saw chain stops moving when the throttle control trigger is released. If the saw chain moves at idling speed, the carburettor may need adjusting. Refer to “Operation–Adjusting Idling speed” later in this manual. If the saw chain still moves at idling speed after adjustment has been made, contact a Homelite service dealer for adjustment and discontinue use until the repair is made. WARNING: All chainsaw service, other than items in the operator’s manual maintenance instructions, should be performed by competent chainsaw service personnel. If improper tools are used to remove the flywheel or clutch, or if an improper tool is used to hold the flywheel in order to remove the clutch, structural damage to the flywheel could occur which could subsequently cause the flywheel to burst and serious injury could result. KICK-BACK Kick-back is a dangerous reaction that can lead to serious injury. Do not rely only on the safety devices provided with your saw. As a chainsaw user, you must take special safety precautions to help keep your cutting jobs free from accident or injury. NOTE: Refer to “Operation” later in this manual for added information on kick-back and how to avoid serious personal injury. UK- Page 5 SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and more safely. SYMBOL NAME EXPLANATION Safety Alert Symbol Indicates danger, warning or caution. It means attention!!! Your safety is involved. Read Your Operator’s Manual Your manual contains special messages to bring attention to potential safety concerns, machine damage as well as helpful operating and servicing information. Please read all the information carefully to avoid injury and machine damage. Eye, Hearing, and Head Protection Wear eye, hearing, and head protection when operating this equipment. SAFE-T-TIPNose Guard The SAFE-T-TIPnose guard on the guide bar helps prevent kick-back. No Smoking No smoking, sparks, or open flame when mixing fuel or filling the fuel tank. Operate with Two Hands Hold and operate the saw properly with both hands. One Handed Do not operate the saw using only one hand. Carbon Monoxide Engines produce carbon monoxide which is an odourless, deadly poison. Do not operate in an enclosed area. Kick-back Danger – beware of kick-back. Bar Nose Contact Avoid bar nose contact. Gloves Wear non-slip gloves. . . . Switch To stop the engine, move the switch to the “O” STOP position. I = ON to Run O = OFF to Stop UK- Page 6 SYMBOLS Petrol Use unleaded petrol intended for motor vehicle use with an octane rating of 87 ([R + M] / 2) or higher. Oil Use 2-cycle oil for air cooled engines. Mix Petrol and Oil Mix the fuel mix thoroughly and also each time before refuelling. SAVE THESE INSTRUCTIONS SPECIFICATIONS Weight - No bar, chain, fuel or oil ................................................................................................................................... 4.4 kg (9.7 lbs) Fuel tank capacity ...................................................................................................................................................... 575 cm3 (19.4 oz.) Oil tank capacity .......................................................................................................................................................... 350 cm3 (11.8 oz.) Bar lengths ......................................................................

Descargar ahora

Introduzca dos números de la imagen: