Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
KEY TO SYMBOLS Symbols on the machine: WARNING! Chain saws can be dangerous! Careless or incorrect use can result in serious or fatal injury to the operator or others. Please read the operator’s manual carefully and make sure you understand the instructions before using the machine. Always wear: • Approved protective helmet • Approved hearing protection • Protective goggles or a visor This product is in accordance with applicable EC directives. Noise emission to the environment according to the European Community’s Directive. The machine’s emission is specified in chapter Technical data and on label. WARNING!Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. Decompression valve: The valve is to reduce the pressure in the cylinder and make starting easier.You should always use the decompression valve when starting the machine. Ignition; choke: Set the choke control in the choke position. This should automatically set the stop switch to the start position. Air purge Adjustment of the oil pump If your machine bears this symbol it is equipped with a catalytic converter. Chain brake, activated (right) Chain brake, not activated (left) Other symbols/decals on the machine refer to special certification requirements for certain markets. Symbols in the operator’s manual: Switch off the engine by moving the stop switch to the STOP position before carrying out any checks or maintenance. Always wear approved protective gloves. Regular cleaning is required. Visual check. Protective goggles or a visor must be worn. Refuelling. Filling with oil and adjusting oil flow. The chain brake must be engaged when the chain saw is started. WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury. 2 – English CONTENTS Contents KEY TO SYMBOLS Symbols on the machine: ..................................... 2 Symbols in the operator’s manual: ....................... 2 CONTENTS Contents ............................................................... 3 INTRODUCTION Dear Customer, .................................................... 4 WHAT IS WHAT? What is what on the chain saw? ........................... 5 GENERAL SAFETY PRECAUTIONS Before using a new chain saw .............................. 6 Important .............................................................. 6 Always use common sense .................................. 7 Personal protective equipment ............................. 7 Machine.s safety equipment ................................. 7 Cutting equipment ................................................ 10 ASSEMBLY Fitting the bar and chain ....................................... 16 FUEL HANDLING Fuel ...................................................................... 17 Fuelling ................................................................. 18 Fuel safety ............................................................ 18 STARTING AND STOPPING Starting and stopping ........................................... 19 WORKING TECHNIQUES Before use: ........................................................... 21 General working instructions ................................ 21 How to avoid kickback .......................................... 28 MAINTENANCE General ................................................................. 29 Carburettor adjustment ......................................... 29 Checking, maintaining and servicing chain saw safety equipment .................................................. 30 Muffler .................................................................. 32 Starter .................................................................. 33 Air filter ................................................................. 34 Spark plug ............................................................ 34 Lubricating the bar tip sprocket ............................ 34 Needle bearing lubrication ................................... 34 Adjustment of the oil pump ................................... 35 Cooling system ..................................................... 35 ”Air Injection” centrifugal cleaning ........................ 35 Heated handles .................................................... 35 Electrical carburettor heating ................................ 36 Winter use ............................................................ 36 Maintenance schedule ......................................... 37 TECHNICAL DATA Technical data ...................................................... 38 Bar and chain combinations ................................. 39 Saw chain filing and file gauges ........................... 39 EC-declaration of conformity ................................ 40 English – 3 INTRODUCTION Dear Cu...
Otros modelos de este manual:Benzo y sierras - TRIOBRAKE 353 (2.18 mb)
Benzo y sierras - TRIOBRAKE 353 (2.18 mb)
Benzo y sierras - TRIOBRAKE EVA-2082S/1220 (2.18 mb)
Benzo y sierras - TRIOBRAKE EVA-2082S/1220 (2.18 mb)