Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
(H) x 1. (D) R Manufactured by: Steren Electronics International, LLC 8675 Miralani Drive, San Diego, CA 92126 1-800-266-3333 550-020Manual.qxd 7/6/04 3:32 PM Page 2 FastHome™ 550-020 Telephone Hub Module Installation Guide Introduction 123456 550-020 Telephone Master Hub RJ3IX4 3 2 1 TMFROMTELCOM WARNING! About Steren Electronics Based in San Diego, Steren has been a leading component manufacturer for nearly 50 years. With more than 2,000 items in our catalog, we supply interconnect products and electronics accessories for home and commercial use. The FastHome™ Series of Fast Media Home Network Systems are produced with superior design and engineering, high-quality materials and exceptional manufacturing processes, attributes that are synonymous with the Steren name. Welcome to the FastHome™ Series Thank you for purchasing this product, part of the FastHome™ Series of Fast Media Home Network Systems by Steren. You have made an excellent choice for the homeowner. The FastHome™ Series of enclosures and modules provide a quality control center for the wiring of cable TV, phone/fax/modem, Ethernet, security, sound system and other voice, video, data and audio devices. Installation is easy and requires only basic tools. By following the instructions in this guide, you will ensure the proper installation of the FastHome™ module. Product Description From a centralized location, the Fast Media Telephone Hub Module distributes four incoming phone/fax/modem lines to six rooms. The module also features an RJ-31X security system connection and an RJ-45 expansion port. This module exceeds TIA/EIA 568 CAT5 standards. All FastHome™ modules feature 18-gauge cold rolled steel construction for excellent RFI shielding. Contents of Package 1. Fast Media Telephone Hub Module 2. Installation manual Tools for Module Installation and Wiring 1. Wire stripper 2. Punchdown tool 3. Personal protective equipment Standard 110 Punchdown Tool Safety Instructions Read these safety instructions before installing this module and follow them carefully. Keep these instructions handy and refer to them when working on the module. • Always wear the necessary personal protective gear and follow all basic precautions and safety procedures when working with wires and electrical equipment, using power tools or working in unfinished construction areas. • Use caution when handling this module. Be careful not to drop the module because this could affect the performance and/or damage the module. • Take extra precautions when working with cables, wires and tools. Do not install cables and wires that appear to be damaged. Avoid kinking cables and wires during installation. • Be careful when using tools that might touch exposed wires or live electrical contacts. • To prevent electric shock: 1) do not touch uninsulated wires and terminals that may still be connected to a live circuit; 2) do not install wires or electrical equipment during a lightning storm; 3) do not install wires or electrical equipment or their enclosures near water or locations where water is used (in the kitchen, bathroom, laundry room, swimming pool, etc.); 4) do not install electrical components or equipment in wet areas, unless specifically rated for moisture. • Make sure all wires in the modules are properly connected or terminated. R Fast Media Home Network Systems Revised 06/04 —2— 550-020Manual.qxd 7/6/04 3:32 PM Page 3 FastHome™ 550-020 Telephone Hub Module Installation Guide Pre-Installation Instructions 1. After the enclosure has been mounted, determine which modules will be inserted. On a sheet of paper, diagram the location where each module will be placed. An expansion module should be placed close to the module with which it interfaces. 2. On the diagram, identify the origin and destination of each cable. Make sure the module serving each device is safely within a 100ft/30m distance. Installation Instructions 1. Identify the enclosure location on which the module will be mounted. 2. Mount the module by inserting the nylon pins into the holes in back of the enclosure and pressing the pins in. Make sure that the pins are firmly seated and the module is secure. Wiring Instructions Note: Module wiring should only be performed by a experienced, licensed electrician. Make sure all power has been shut off to the equipment and there is no live circuit. Route all cables through the knock-out holes and bundle with tie wraps or cable straps to ensure safe and long-lasting connections. 1. Route Category 5 phone cables from the network interface device at the phone company’s demarcation point to the module. 2. Using a wire stripper, strip off about 2. of the cable to expose the wires. Separate the four wire pairs. 3. Using a standard 110 punchdown tool, terminate the tip and ring wires at the “from telcom” side of the telephone hub. Match each wire pair with the color codes on the IDC block (white/blue: blue pair in line one; white/orange: orange pair in line two; white/...