Votos - 3, Puntuación media: 3.7
(
)
)
|
Otros manuales para este modelo:
Resumen del manual
. Right Left . You can also use the optional ear rubbers instead of the ear hook. Remove the earpiece cover and attach the ear rubber. Then, rotate the ear rubber left or right slightly depending on which ear you are going to wear the headset. Using your headset This section explains how to turn the headset on, pair and connect to the phone, and use various functions. • Activated functions and features may differ depending on the phone type. • Some devices, especially those that are not tested or approved by Bluetooth SIG, may be incompatible with your headset. To ensure you get the best performance from your headset • Keep the distance between your headset and device as small as possible and avoid placing your body or other objects in the signals path. • If you usually use your mobile phone with your right hand, wear the headset on your right ear. • Covering your headset or device could effect its performance so keep contact to a minimum. English 9 Turning the headset on or off Turning the headset on or off To turn the headset on Slide up the power switch. The blue indicator light flashes 4 times. Turning the headset on for the first time, it will automatically enter pairing mode for approx 3 minutes. For more information, see page 12. To turn the headset off Slide down the power switch. The indicator light flashes blue and red then turns off. Using voice prompts Voice prompts will inform you about the current status of the headset and usage instructions. Voice prompts are available in English only. If you can’t hear any voice prompts, make sure the voice prompt feature is turned on. Turning the voice prompt on or off In Pairing mode, press and hold both volume buttons simultaneously for 3 seconds to turn the Voice prompts on or off. To enter Pairing mode, see page 12. If the Voice prompts turned on, The blue indicator light flashes 2 times and you will hear “Ready to Pair. Pin code is 0000” repeatedly from your headset. If the Voice prompts turned off, The red indicator light flashes 2 times and the repeated mention is stopped. List of voice prompts Status Voice prompt When you turn the headset on or off “Power on” or “Power off” When you enter Pairing mode “Ready to pair. Pin code is 0000” When you connect the headset to devices “Connected” When you disconnect the headset from the device “Disconnected” When a call is ended “Call terminated” English 11 Pairing and connecting the headset Pairing and connecting the headset Pairing means unique and encrypted wireless connection between two Bluetooth devices when they agree to communicate with each other. In Pairing mode, two devices should be placed close enough to each other. Pairing and connecting the headset with a phone 1 Enter Pairing mode. (The blue indicator light stays lit and stays for 3 minutes.) • With the headset turned on, press and hold the Talk button for 3 seconds. • If the headset is turned on for the first time, it will go into Pairing mode immediately. 2 Activate the Bluetooth feature on your phone and search for the headset (see your phone’s user manual). 3 Select the headset (HM1800) from the list of devices found by your phone. 4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to pair and connect the headset to your phone. Once pairing is completed, the headset will attempt to reconnect each time you turn it on. Your headset supports the Simple Pairing feature which allows the headset to be paired with a Bluetooth device without requesting a PIN. This feature is available for devices that are compliant with Bluetooth version 2.1 or higher. 12 Pairing via the Active pairing feature With the Active pairing feature, your headset automatically looks for a Bluetooth device within range and tries to make a connection with it. Make sure the phone’s Bluetooth visibility option is set on. • In Pairing mode , press and hold the Talk button on the headset. The indicator light colour changes to violet from blue. The headset will attempt active paring for up to 20 seconds. • The Bluetooth phone you want to connect with must not be paired with other devices. If the phone is already connected to another device, end the connection and restart the Active pairing feature. • This feature may not be supported on some devices. Connecting with two Bluetooth phones With the Multi-point feature activated, your headset can be connected to 2 Bluetooth phones at the same time. To turn Multi-point feature on In Pairing mode, press and hold the Volume up button. The blue indicator light flashes twice. To turn Multi-point feature off In Pairing mode, press and hold the Volume down button. The red indicator light flashes twice. English 13 1 After connecting with the first Bluetooth phone, enter Pairing mode again. 2 Activate the Bluetooth feature on the second Bluetooth phone and search for the headset . 3 Select the headset (HM1800) from the list of devices found by the second Bluetooth phone. 4 If requested, enter the Bluetooth PIN 0000 (4 zeros) to connect th...