Votos - 3, Puntuación media: 5
(
)
)
|
Resumen del manual
The loopset enters pairing mode, and the indicator light quickly flashes blue. To pair the loopset if it has been previously paired with another device, ensure that the loopset is switched off, and press and hold the multifunction key (for over 5 seconds) until the indicator light quickly flashes blue. 3. Within about 5 minutes, activate the Bluetooth feature on your phone or music player, and set it to search for Bluetooth devices. For details, see the user guide of your device. If the pairing is not initiated within about 5 minutes, the loopset switches off. 4. Select the loopset (Wireless Loopset LPS-5) from the list of found devices on your phone or music player. 5. If necessary, enter the passcode 0000 to pair and connect the loopset to your device. If your device does not have a keypad, it may use this passcode by default. In some devices, you may need to make the connection separately after pairing. If pairing is successful, the loopset appears in the menu of your device where you can view the currently paired Bluetooth devices. When the loopset is connected to your device and is ready for use, the indicator light slowly flashes blue. Get started You can pair the loopset with up to eight devices but connect it to only one device at a time. Disconnect the loopset To disconnect the loopset from your device, switch off the loopset, or disconnect it in the Bluetooth menu of your device. You do not need to delete the pairing with the loopset to disconnect it. Reconnect the loopset If the loopset loses the connection to your device when it is switched on, the loopset vibrates three times and beeps about once a minute. To reconnect the loopset to the phone or music player that you have last used with it, switch the loopset off and back on. Alternatively, if the loopset is switched on, make the connection in the Bluetooth menu of your device, or press the multifunction key. When the connection is established, the loopset vibrates once and beeps twice. You may be able to set your device so that the loopset connects to it automatically. To activate this feature in a Nokia device, change the paired device settings in the Bluetooth menu. Basic use 3. Basic use ¦ Set up Ensure that the loopset is paired and connected to your phone or music player. Detach one end of the loop from the loopset, place the loop around your neck, and plug the loop end back into the loopset. Switch your hearing aid to T mode. Wear the loopset around your neck when you use it with your hearing aid. ¦ Adjust the loopset volume To adjust the strength of the magnetic field that the loopset produces for the hearing aid, press a volume key during a call or while you listen to music. The loopset vibrates (if vibration is enabled) and beeps at the selected volume level, and the hearing aid changes the audio volume accordingly. ¦ Adjust the sidetone volume Sidetone is the sound that is picked up by the loopset microphone and routed to the hearing aid during a call. To adjust the sidetone volume, press the multifunction key twice during a call, and press a volume key within 15 seconds. Basic use ¦ Select vibration mode You can set the loopset to vibrate in different situations. To select the desired vibration mode during a call (when there is no other call waiting or on hold), press and hold the multifunction key for about 2 seconds one or more times: • If the loopset beeps once, the loopset vibrates when you press a key or receive a call. • If the loopset beeps twice, the loopset vibrates when you press a key. • If the loopset beeps three times, the loopset vibrates when you receive a call. This is the default setting. • If the loopset beeps four times, the vibration is turned off. ¦ Calls To make a call, use your mobile phone in the normal way when the loopset is connected to it. To answer or end a call, press the multifunction key, or use the phone keys. To reject a call, press the multifunction key twice. When you receive a call, the loopset vibrates and plays a ringing tone, and the indicator light quickly flashes blue. To switch a call from the loopset to the connected device, switch the loopset off, or use the related feature of your device (the loopset remains switched on). To switch the call back to the loopset, switch the loopset on (and connect it to your device), or if the loopset is switched on, press and hold the multifunction key for about 2 seconds. Basic use ¦ Manage two calls To use these features, your mobile device must support the Bluetooth Hands-Free Profile 1.5, and call waiting must be activated in the device. Call waiting is a network service. To answer a waiting call and end the active call, press the multifunction key. To answer a waiting call and put the active call on hold, press and hold the multifunction key for about 2 seconds. To end the active call and make the call on hold active, press the multifunction key. To switch between the active call and the call on hold, press and hold the multifunction key for about 2...