Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
English- OPERATING INSTRUCTIONS TO OPERATE YOUR HAND BLENDER CONNECTION AND USE LOOSE • Your blender is a three-part assembly. The upper part contains the motor housing and the speed buttons. The lower part contains the Blade housing or the chopper attachment. • To Lock: Hold the motor housing in the right hand and the Blade housing or the chop housing in the left. Attach the motor housing up to the Blade housing or the chop housing. Rotate the motor housing to the left. The assembly locks firmly. • To Unlock: Hold the motor housing in the right hand and the Blade housing or the chop housing TIGHT in the left. Rotate the motor housing to the right to separate the units. • Place dual purpose lid on the bottom of the blending/measuring cup for added stability. • Immerse the blade guard completely into ingredients. • Depress the High or Low button and begin blending ingredients by moving the appliance up and down and in circles. Adjust speed as necessary. For continuous blending, maintain pressure on button for a maximum of 1 minute. Blending action stops as soon as button is released. (Models 2609 and 2611 only) • Hold the hand blender firmly. NOTE: During blending use, it is normal for suction to be created of the container. • When desired consistency has been reached, release button and lift the blender from mixture. To prevent splashing, always release button before removing blender from ingredients. CAUTION: To extend the life of this appliance, never let it for more than 1 minute at a time. After 1 minute of continuous release button and let appliance rest for 3 minutes before using it again. WARNING: Do not use hand blender in saucepan pan from heat before blending. BLENDING CUP / MEASURING CUP INFORMATION • The lid can be easily used • For added stability, use the dual purpose the base of the Blending • The cup which a measuring can also be English- MEASURING CHART FOR BLENDING CUP MILLILITERS CUPS OUNCES 50 .21 1.70 100 .42 3.40 150 .63 5.00 200 .85 6.76 250 1.10 8.50 300 1.25 10.00 350 1.50 12.00 400 1.70 13.50 450 1.90 15.25 500 2.10 17.00 550 2.32 18.50 600 2.50 20.25 650 2.75 22.00 700 3.00 24.00 REMOVAL OF BLENDING ROD Grasp blending rod firmly and rotate motor housing to the right. USING THE CHOPPER ATTACHMENT* (MODEL 2612 ONLY) The chopper accessory is ideal for chopping a wide range of vegetables, dried fruits, nuts, etc. • Insert cutting blade into the chopping bowl • For best results, cut large ingredients into pieces of approximately 1/2-inch cubed before chopping NOTE: Do not chop large ice cubes or extremely hard foods, such as whole nutmegs, coffee beans, dried corn and grains. • Secure the chopper cover by setting on the turning to the right until firmly locked into The upper shaft of the chopping blade the receiving hole in the underside • Attach the motor housing into cover and turn to the right is firmly locked into place. convenient outlet. • The chopper has appropriate button the blender on. *Variable speed TIGHT LOOSE English- • Use the slow speed where possible especially if you want to chop the food into bigger pieces. The high speed can be used for chopping the food to small pieces or for pureed foods. • You can adjust the speed of the unit with the speed control when using slow speed or high speed function. (Model 2612) • Set the speed control dial to the desired speed and depress the slow or high speed button as desired. (Model 2609) • If the ingredients stick to the chopper bowl sides, loosen them by adding a small amount of liquid or by using a spatula to scrape the food back into the inner part of the bowl. • Release the speed control button and allow the blade to come to a complete stop before removing the bowl cover by turning cover to the left. Take care when removing the blade and hold only by the shaft handle as the metal blade is sharp. NOTE: Do not clean blades with fingers but use a spoon or spatula to scrape food into bowl after blade is removed. CAUTION: Unplug the appliance before attaching the chopper attachment. Put the food ingredients in the chopper bowl, secure the bowl cover to the chopping bowl and attach the motor housing to it. Use the slow speed, especially if you are chopping lumps in the ingredients. The high speed can be used as a finishing touch. CLEANING YOUR HAND BLENDER BE SURE UNIT IS UNPLUGGED BEFORE ATTEMPTING TO CLEAN. Motor unit should be wiped clean with a damp cloth or NEVER immerse motor unit in water. Afte...
Otros modelos de este manual:Licuadoras - 2609 (2.73 mb)
Licuadoras - 2612 (2.73 mb)