Votos - 3, Puntuación media: 5 ( )

Fabricar: Bosch Tamaño del archivo: 4.36 mb Nombre del archivo: Idioma del manual:

Never immerse the power unit in water. Slicer/Shredder, w/Unbreakable Bowl (MUZ 7 TS1) WARNING 1. Blades on discs are sharp. Handle carefully. Do not grip the discs by the blades. 2. When operating slicer/shredder keep hands clear of filling tube. Only work with pusher. 3. Always operate the slicer/shredder with the cover in place. The MUM 7220 UC Bosch Concept Series Kitchen Machine includes the MUZ 7 TS1 slicer/shredder attachment. The slicer/ shredder attachment consists of, figure 15: a. Cover closure/pusher b. Cover c. Unbreakable 12-cup capacity bowl d. Driveshaft e. 3 slicer/shredder discs: • reversible slicing disc • reversible shredding disc • grating disc f. disc holder g. stabilizing pin 17 Figure 15. Slicer/shredder, intended use The slicer/shredder attachment has been designed for slicing, shredding and/or grating of vegetables, as well slicing/ shredding of soft cheeses and sausages or meat and grating of vegetables and hard cheese. Use of Slicer/Shredder Before beginning to use this or any other attachment, make sure that the power unit is on a smooth, clean, suitable work surface and switched to Off position, “O/Off,” and that you have removed the motor drive cover. 1. Before using the slicer/shredder for the first time, it is recommended that the bowl, driveshaft, cover, closure/pusher, discs, disc holder and stabilizing pin be washed. WARNING The blades on the discs are very sharp. Handle with care. All components of the slicer/shredder are dishwasher safe. The driveshaft can be removed for cleaning. After washing, rinse well and dry before using. 2. To assemble the slicer/shredder: a. If the driveshaft is not presently inserted in the bowl, insert driveshaft as shown in figure 15. b. Place slicer/shredder bowl on power unit by placing over mono drive and while pressing down turn it counterclockwise to stop and lock the bowl in place, see figure 16a. c. Select disc to be used and place on disc holder and place over driveshaft, see figure 16b. 18 a. b. a. b. Figure 16. d. If stabilizing pin is not in cover, insert pin, see 15e. Then place cover on bowl, making sure the tabs on the cover enter the recesses in the bowl, and turn counterclockwise to stop, see figure 17. Figure 17. Placing Slicer/Shredder into Operation Make sure the power unit is on a smooth, clean, suitable work surface and switched to the Off position, “O/Off.” Unwind the electrical cord to the necessary length and plug into a convenient outlet. The slicer/ shredder is now ready for use. Place items to be sliced, shredded or grated in feeding funnel and be sure to use the pusher to feed items into the discs when in operation. Learning how to feed food properly into the feed funnel is the most important factor for proper slicing and grating: 1. For long slices or long shreds, place food into the feeding funnel lengthwise. 2. For short or circular slices, place food in the feeding tube on end. For example, If you wish to have circular slices of zucchini or carrots: • cut to length not to extend above the top of the feeding tube. • place the cut zucchini or carrots in the feeding tube on end until the feeding tube is packed. To slice a single narrow item, a carrot for example: • place the carrot in the feeding funnel opposite the cutting edge of the disc. The wall of the feeding funnel will then serve to hold the piece vertical. When using the slicer/shredder be sure to watch the level in the bowl and stop the slicing, shredding or grating before the level of the material being sliced, shredded or grated reaches the level of the disc holder. Slicer/shredder tips: 1. Shopping for fruits and vegetables that will fit into the feeding funnel will simplify food preparation. 2. Foods that are to be used together may be sliced together. This can be used to your advantage. For example, green onions and celery are often used together, but feeding the green onions into the feeding funnel alone is difficult. Try slicing the green onions at the same time as the celery by interspersing them in the feeding funnel with the celery. 3. Use the slicing disc to shred lettuce. 4. Do not overcook potatoes that are to be sliced. Also it is recommended that you let them cool first. Potatoes must be cool and firm to obtain the regular slices. 19 If the slicer/shredder does not start (even after trying the highest speed) and the indicator above the rotary dial is flashing: the disc has become blocked by the contents. The power unit should be: 1. Switched to Off position, “O/Off,” and unplugged. 2. The top cover should be removed and the items causing the blockage removed. Removing Contents Before beginning to remove the contents from the slicer/shredder, make sure that the power unit has been turned to the Off position, “O/Off.” Remove the slicer/ shredder from the power unit by turning the slicer/shredder bowl clockwise while lifting. With the slicer/shredder removed from the power unit, remove the top cover, by turning it clockwise while lifting. Nex...

Descargar ahora

Introduzca dos números de la imagen: