Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Please refer to the troubleshooting section on page 15 for more information. Power-On Safeguard If the blender is plugged in with the On/Off/Pulse Switch in the “On” position, the blender will not start. Please refer to the troubleshooting section on page 15 for more information. 11 OPERATING TIPS • Keep the lid on the blender jar while blending. Do not remove the blender jar from the base while the blender is running. • Stop the blender and unplug before using utensils in the blender jar. Do not use metal utensils – they can scratch the jar or damage the blade. • Blend warm or hot liquids using the Low speed or Pulse setting. Increase speed if necessary. Cool hot foods, if possible, before blending. • Add food to the blender jar in larger quantities than you would with other blenders – you can add 3 to 4 cups at a time versus 1 cup portions. • Thorough blending usually requires only a few seconds of operation. Be careful not to over-process foods. • When chopping dry ingredients, make sure the blender jar, lid, and blade are completely dry. • With foods that tend to stick to the jar, use the Pulse feature. • For many ingredient mixtures, start the blending process at the Low speed setting to combine the ingredients thoroughly, then increase to a higher speed if necessary. • The ingredient cap can be removed and liquid or ice added to the Chef’s Blender at the Low speed setting. When operating the blender at higher speeds, with a full jar, or with hot contents, stop the blender before adding ingredients. 12 CARE AND CLEANING General Procedures • Wash and rinse the blender jar, and clean the base, immediately after every use. Do not let food residue dry on any part of the blender jar or base. • Sanitize the blender before initial use and whenever the blender will not be used for more than one hour. • Do not use abrasive cleansers or scouring pads for cleaning. • Do not use sharp objects to clean around the speed selection buttons. • Do not immerse the blender base or cord in water. • To maximize the life of the polycarbonate jar, KitchenAid does not recommend automatic dishwashing. Washing and Rinsing the Blender Jar 1. Remove the ingredient cap from the jar lid. Rinse the jar, lid, and ingredient cap under running water to remove as much food residue as possible. Return the ingredient cap to the lid. 2. Fill the jar 3.full (approx. 5 cups) with warm water 4 (up to 115° F or 46° C) and add 1 or 2 drops of manual dishwashing liquid. 3. Place the jar on the blender base and attach the lid. Run the blender for 30 seconds at the High speed setting. (The Bar Blender runs at the equivalent of High speed in the “On” position.) Remove the blender jar and empty contents. 4. Repeat Steps 2 and 3 until no food residue remains in the jar or on the blade assembly. 5. Rinse the jar by filling it 3.4 full with warm water (approx. 5 cups), then repeat Step 3. 6. Wipe the exterior of the blender jar and lid with a warm, sudsy cloth; wipe clean with a damp cloth and dry with a soft cloth. Cleaning the Base 1. Unplug the blender before cleaning the base and cord. 2. Wipe the blender base and cord with a warm, sudsy cloth; wipe clean with a damp cloth and dry with a soft cloth. Continued… 13 CARE AND CLEANING Sanitizing the Blender For sanitizing the blender, use a sanitizing solution with a chlorine concentration in the range of 100 to 200 parts-per-million. Such a solution can be made by adding 1 tablespoon of chlorine bleach to 1 gallon of lukewarm water. 1. Wash and rinse the blender jar, and clean the base, before sanitizing. 2. Fill the jar 3.full with sanitizing solution (approx. 5 cups). Place the 4 jar on the blender base and attach the lid. 3. Run the blender for 2 minutes at the High speed setting. (The Bar Blender runs at the equivalent of High speed in the “On” position.) Remove the blender jar and empty contents. Do not rinse with water. 4. Remove the ingredient cap from the lid. Immerse the lid and cap in sanitizing solution for 2 minutes. 5. Let jar, ingredient cap, and lid air dry. Do not rinse with water. 6. Unplug the blender before sanitizing the base and cord. 7. Dampen a clean, soft cloth with sanitizing solution, and wipe the base and cord thoroughly. Let base and cord air dry. 14 TROUBLESHOOTING • If the blender does not operate when switched on: – Check to see if the blender is plugged into a grounded 3 prong outlet. If it is, unplug the blender, then plug it into the same outlet again. If the blender still does not work, check the fuse or circuit breaker on the electrical circuit the blender is connected to and make sure the circuit is closed. – The blender may be jammed or overheated. Move the On/Off/Pulse Switch to the “Off” position and refer to the troubleshooting instructions in the remainder of this section. • If the blender stops while blending: – The blender may be jammed. If a foreign object or blender ingredients jam the blades, the blender will shut off to prevent damage to the motor. Move t...
Otros modelos de este manual:Licuadoras - KCB148 (113.18 kb)