Votos - 4, Puntuación media: 4
(
)
)
|
Resumen del manual
IMPORTANT SAFEGUARDS When using an electrical appliance basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS BEFORE USING. 2. To protect against the risk of electrical shock, do not put motor base of blender in water or other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Always unplug from outlet when not in use, before putting on or taking off parts, and before cleaning or removing contents from blender jar or container. Never put hands into the blender jar or container, or handle the blades with appliance plugged in. 5. Avoid contact with moving parts. 6. Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions, or is dropped or damaged in any manner. Return appliance to nearest Cuisinart service facility for examination, repair, and/or mechanical or electrical adjustment. 7. The use of attachments, including canning or ordinary jars, not recommended or sold by Cuisinart may cause fire, electrical shock, or risk of injury to persons. 8. Do not use outdoors. 9. Do not let cord hang over edge of counter or table where it can be inadvertently pulled on or tripped over or touch hot surfaces, which might damage the cord. 10. Keep hands and utensils out of jar while blending to reduce the risk of severe injury to persons or damage to blender itself. A rubber or plastic spatula may be used, but must be used only when the blender is turned OFF. 11. When blender is in ON mode, and LED lights are flashing, do not touch cutting assembly, interfere with blade movement, or remove blender jar cover. Accidentally touching a speed button may activate the blender. 12. BLADES ARE SHARP. HANDLE CAREFULLY. 13. To reduce the risk of injury, never place cutting assembly on base unless the blender jar is properly attached. 14. Always operate blender with the cover in place. 15. Never leave your blender unattended while running. 16. When blending HOT liquids, remove measured pour lid (center piece of cover) to allow steam to escape. 17. Twist on locking ring firmly. Injury can result if moving blades accidentally become exposed. 18. Do not use an extension cord with this unit. Doing so may result in fire, electrical shock, or personal injury. Regarding your cord set: A longer cord has been provided so that you will have flexibility in positioning your Cuisinart® SmartPower™ Blender near an electrical outlet. Exercise care when using the longer cord to avoid entangling or tripping over the cord. The longer cord should be arranged so that it will not drape over the counter or table top, where it can be pulled on by children or tripped over. Excess cord should be stored in the cord storage area at the back of the blender base, to avoid injury caused by the longer cord. 19. Wash the blender jar, cutting assembly, locking ring, and cover before first use. 20. WARNING: TO REDUCE THE RISK OF ELECTRICAL SHOCK OR FIRE, DO NOT REMOVE THE BASE PANEL. NO USER SERVICEABLE PARTS ARE INSIDE. REPAIR SHOULD BE DONE ONLY BY AUTHORIZED PERSONNEL. 21. WARNING: FLASHING LIGHT INDICATES READY TO OPERATE. DO NOT TOUCH BLADES. SAVE THESE INSTRUCTIONS FOR HOUSEHOLD USE ONLY NOTICE: This appliance has a polarized plug (one prong is wider than the other). To reduce the risk of electric shock, this plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. UNPACKING INSTRUCTIONS Place the gift box containing your Cuisinart® SmartPower™ 5-Speed Electronic Blender on a flat, sturdy surface before unpacking. Remove More Frozen Drinks book from top of Glass Box insert. Next carefully remove glass insert box. Remove glasses and set aside. Next remove instruction booklet and other printed materials from top of corrugated insert. Next remove the top corrugated insert. Carefully lift blender base from box and set aside. Remove the lower corrugated insert containing the blender jar assembly. Use caution – do not tip the jar when removing. Remove any additional literature from the box. To assemble the blender, follow the “Assembly” instructions on page 4 of this instruction booklet. Replace all corrugated inserts in the box and save the box for repackaging. See the “Features and Benefits” section of this booklet for a listing of all blender parts. Before using for the first time: Wash all parts according to the “Cleaning and Maintenance” section on page 6 of this booklet to remove any dust or residue. TABLE OF CONTENTS Important Safeguards ..................................p.2 Unpacking Instructions ...............................p.2 Introduction ................................................p.3 Features and Benefits .................................p.3 Use and Care ...............................................p.4 Assembly ......................................................p.4 He...