Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
1 Press SUBTITLE repeatedly to select a subtitle option.1 The current subtitle language/option is displayed on-screen and in the front panel display. Subtitle 1/2 English 2 To switch the subtitle display off, press SUBTITLE then CLEAR. There may be a short delay after pressing the button before the subtitles change. Tip • To set subtitle language preferences, see Subtitle Language on page 42. Switching audio streams/channels AUDIO Some BD and DVD movie discs contain multiple audio streams that you can select on playback. These might be different audio languages and/or different audio formats (such as a DTS 5.1channel sound track and a Dolby Digital 2-channel sound track). • Press AUDIO repeatedly to select an audio channel/stream option.2 The current option is shown on-screen. • There may be a short delay after pressing the button for the audio channel to change. Tip • Even when multiple audio streams are included in a movie file, you cannot select from among them while playing back of a movie file. • To set audio language preferences, see Audio Language on page 42. Displaying disc or file information DISPLAY Various track, chapter and title information, as well as the video transmission rate for DVD and BD movies, can be displayed on- screen. The information available depends on the type disc or file, and whether it’s playing or stopped. • Press DISPLAY to show/switch the information displayed. Press DISPLAY repeatedly to change the displayed information.3 Play 1–2 0 . 03 . 10 DVD-VIDEO Repeat Chapter 12 1h 28m 03s Chapter Title Total DVD-Video Play display 1 Play 1–2 DVD-VIDEO 0 . 02 . 43 0 . 03 . 16 Chapter Time Chapter Total Repeat Chapter0 . 03 . 12 10 . 08 Mbps DVD-Video Play display 2 Switching the output video resolution OUTPUT RESOLUTION You can switch the output video resolution for HDMI and component output. • Press OUTPUT RESOLUTION repeatedly to select an output video resolution. The current source and output video resolution are shown on- screen. Output Video Resolution: Source Direct Source: 1080 / 24p (1080 / 24p) Note • Depending on your display, some of the settings may result in the picture disappearing. In this case, press OUTPUT RESOLUTION repeatedly until the picture re-appears. •See Changing the output video resolution on page 14 for more information. Audio: 1/2 Dolby Digital 2/0ch English Switching audio languages on a BD/DVD movie Note 1 Some discs only allow you to change the subtitle language from the disc menu. Press POPUP MENU/MENU to access. 2 Some discs only allow you to change the audio language from the disc menu. Press POPUP MENU/MENU to access. 3 There may be instances with some discs where no information can be displayed. 25 En Getting Started 04 Getting Started 04 Frequently Asked Questions • Why won’t the disc I loaded play? First check that you loaded the disc the right way up (label side up), and that it’s clean and not damaged. See Taking care of your player and discs on page 46 for information on cleaning discs. If a disc loaded correctly won’t play, it’s probably an incompatible format or disc type. See Disc/content format playback compatibility on page 8 for more on disc compatibility. • There’s no picture! Your TV is probably not compatible with the selected video output resolution. Check your TV for compatibility with progressive scan video and higher resolutions. Press the OUTPUT RESOLUTION button to switch the video output. See also Changing the output video resolution on page 14. • I can’t see any picture, or get high definition video output when playing some BDs! When playing some discs, there may be no composite video, S-Video and/or component video output, or high-definition content may be converted to standard-definition 480i or 480p component output. This is for content protection. To view the disc, connect the player to an HDMI-compatible display. See Connecting for HDMI output on page 13. • I have a widescreen TV so why are there black bars at the top and bottom of the screen when I play some discs? Some movie formats are such that even when played on a widescreen TV, black bars appear at the top and bottom of the screen. This is not a malfunction. • I’ve connected to a HDMI/DVI compatible component but I can’t get any signal and the front panel HDMI indicator won’t light! Make sure that you’ve selected this player as the HDMI input in the settings for the component you’re using. You may need to refer to the instruction manual of the component to do this. An HDMI connection can only be made with other HDMI components, or a High-bandwidth Digital Content Protection (HDCP)-compatible DVI component. See Connecting for HDMI output on page 13 for more on HDMI compatibility. • There’s no picture from the HDMI output! Make sure the output resolution of this player matches that of the component you have connected using HDMI. See Changing the output video resolution on page 14. • Why is the playback sample rate of the DVD only 48 kHz instead of 96 kHz? Playback...