Votos - 1, Puntuación media: 3
(
)
)
|
Resumen del manual
. is displayed in file names, etc. The characters that cannot be displayed on this player are displayed in .. A message indicating low memory (local storage) appears while playing a BD-ROM disc. Erase the BDMV data (page 51). The DVD layer of BD and DVD hybrid discs cannot be played. Is Hybrid Disc Playback properly set? Set Hybrid Disc Playback to DVD (page 45). The CD layer of BD and CD hybrid discs cannot be played. Is Hybrid Disc Playback properly set? Set Hybrid Disc Playback to CD (page 45). The BDMV format on BD-R/ -RE discs cannot be played. To play the BDMV format on BD-R/-RE discs containing both BDMV and BDAV formats, set BDMV/BDAV Playback Priority to BDMV (page 45). Problem Check Remedy Software updating Problem Check Remedy “Connection to the software Perform Connection Test (page 51). If “Network connection updating server failed” is test completed successfully.” is displayed, check the proxy displayed when you try to server settings (page 50). Also there may be a problem with the update the software. Internet connection. Contact your Internet service provider. Software updating is slow. Depending on the Internet connection and other conditions, some time may be required to update the software. • “WRT NG ****” is displayed The message is displayed when software updating has failed. on the front panel display Check again whether it can be updated properly. during software updating. (**** meaning any characters) • “WRT FAILED” is displayed on the front panel display during software updating. A message other than Is “LAN cable not connected” displayed? Check that this player and Ethernet hub (or router with hub “Network connection test functionality) are properly connected. completed successfully” is • Is “IP address cannot be obtained.” displayed? • If the IP address is obtained using the DHCP server function, displayed when Connection check the setting is correct at the Display Network • Is “No response from the gateway.” displayed? Test is performed. Configuration (page 51). For details on the DHCP server function, see the operating instructions of the Ethernet hub (or router with hub functionality). • Set the IP address manually. Is “IP address is overlapped.” displayed? Is the Ethernet hub (or router with hub functionality) operating properly? • Check the operation and settings of the DHCP server function of the Ethernet hub (or router with hub functionality). For details on the DHCP server function, see the operating instructions of the Ethernet hub (or router with hub functionality). • If this player’s has been set manually, reset the IP address of this player or other components. • Check the settings and operation the Ethernet hub (or router with hub functionality). For details, see the operating instructions of the Ethernet hub. • Reboot the Ethernet hub (or router with hub functionality). En KURO LINK Problem Check Remedy KURO LINK function does • Is the HDMI cable properly connected? To use the KURO LINK function, connect the Flat Panel TV and not work. AV system (AV receiver or amplifier, etc.) to the HDMI OUT • Are you connected to the HDMI OUT (SUB) terminal? (MAIN) terminal (page 16). Is the HDMI cable you are using a High Speed HDMI™ cable? Use a High Speed HDMI™ cable. The KURO LINK function may not work properly if HDMI cable other than a High Speed HDMI™ cable is used. Is KURO LINK set to On on the player? Set KURO LINK to On on the player (page 45). Does the connected device support the KURO LINK function? • The KURO LINK function will not work with devices manufactured by companies other than Pioneer, even when connected using an HDMI cable. • The KURO LINK function will not work if devices that do not support the KURO LINK function or devices manufactured by companies other than Pioneer are connected between the KURO LINK-compatible device and the player. • Even when connected to a Pioneer product compatible with the KURO LINK function, some of the functions may not work. Also refer to the operating instructions of the connected device. Is KURO LINK set to On on the connected device? Set KURO LINK to On on the connected device. The KURO LINK function operates when KURO LINK is set to On for all devices connected to the HDMI OUT (MAIN) terminal. Once connections and settings of all the devices are finished, be sure to check that the player’s picture is output to the Flat Panel TV. (Also check after changing the connected devices and connecting and/or disconnecting HDMI cables.) If the player’s picture is not being output to the Flat Panel TV, the KURO LINK function may not work properly. For details, refer to the operating instructions of the connected device. Are multiple players connected? The KURO LINK function may not work if three or more players, including this player, are connected by HDMI cable. Others Problem Check Remedy The player’s power turns off Is Auto Power Off set to On? If Auto Power Off is set to On, the player’s power turns off automatically. automaticall...