Votos - 4, Puntuación media: 4.3
(
)
)
|
Resumen del manual
UP (Ql/VOL DOWN (Q)keys. Remote control: Adjust the volume with the volume UP/volume DOWN keys. • Volume leve. indicator (Û to 30). {The volume level is displayed on the remote control.) To pause playback Press during playback status. r Min unit : Press the PLAY / PAUSE (►) Remote control : Press the PLAY / PAUSE (►II) • Each time :he key ;s pressed, pause ana playback : nodes sie changed over. Stopping playback Press during playback or pause status. Min unit : Press the STOP /OFF (■) Remote control : Press the STOP /OFF {■) Turning the power off Press during stop status. / Min unit : Press the STOP /OFF {■) Remote control : Press the STOP /OFF (■) k. ) The power will automatically turn off if the unit is not operated for about 3 minutes after it has stopped. When Playback ;s started again, it will start from the start of the track that was being played back when playback was stopped. {Playback will start from the first track if the MD has been removed from the unit.) This is called the RESUME function. Removing the MD f ’ \ ic^nmc» i m^ J • Aiter the power is turned off, slide the OPEN knob in the direction of the arrow and remove the MD. Fast forward/ fast reverse (SEARCH) Operate the key while playback is in progress, (only by remote control operation!. O Press the SHIFT key Q Press and hold down either the key or the key. For forward search: keep pressing the key during playback. For reverse search: keep pressing the m key during playback. When you lift your ringer off the key, normal playback wi'H be resumed 1. In fast forward mode, stop status is engaged wrien the end of the las; track lÎLotês) is reached 2 In reverse mode, playback starts when the start of the first ‘rack is reached. 3. Depending on recording conditions, souna interruptions may occur during a fast forward/reverse operation. Selecting Play Mode Press during playback or stop status. (Random mode cannot be engaged while playback is in progress.) (only by remote control operation). O Press the SHIFT key © Press the PLAY {►) key Repeat / Random mode display 0) Not lit (2; G 3) .ALL (4) ALL Released The track being played will be played repeatedly. All tracks of the disc will be played re peatedly. Random playback mode The Play Mode changes each time the ► II key is pressed. Character information Indication 'T'1 OFF : Released 2' ONE : The track being played will be played repeatedly. - ALL : All tracksof the disc will be played repeatedly. (4'; RANDOM : Random playback mode 1. After stop status has been engaged during repeat playback, when playback is resumed, repeat playback will start from the point where playback was stopped. 2. After the disc has been removed, playback will start normally, from the first track. Changing the tone (BASS BOOST) Press during playback or stop status, (only by remote control operationI. O Press the SHIFT key © Press the volume DOWN key SHIFT key Rear of the remote control The mode changes each time the volume DOWN key is pressed. CD BASS 0: Cancel ® BASS 1: Bass is boosted slightly. — C?.; BASS 2: Bass is boosted more. When the bass is boosted, raising the volume excess;ve!y will result in sound distortion If this happens, either lower the bass level or the volume level. Playback (Application) Setting AUTO POWER SAVE Press during playback or stop status. Normally, the unit is set to "auto PS" mode to conserve the battery. When using the unit in a place where it is subject to vibration or impact, set "PS off" mode before operating the unit. (only by remote control operation). O Press the SHIFT key © Keep pressing the ►!! key until the display appears. Theptay mode changes each time the ► II key is pressed. ■ i': "auto PS": cower conservation it ode © "PS off" : skip gua-ii mode Changing the display (only by remote control operation). Г When pressed during STOP operation: Q Press the SHIFT key © Press the volume UP key The mode changes each time the volume UP key is pressed. CD Disc name ©Total number of tracks — (3, Total playing time When pressed during PLAY operation: © Press the SHIFT key © Press the volume UPkey The mode changes each time the volume UP key is pressed. ©Title of track being played ©Number of track currently being played — © Elapsed time of track currently being played Track titles or disc names are not displayed if they are nor recorded on the disc. Convenient functions Avoiding faulty operation (HOLD) When you are operating the unit on a train or when you are carrying it witi the power off, this function allows you to prevent faulty operation due ti accidental key operation. (Both the main unit and remote control should b< carried with the HOLD function engaged.) Activating HOLD status for main unit keys only Activating HOLD status foi remote control keys only To release Activating the operating tone (Beep) The operating tone can be activated or deactivated, (only by remote control ope...
Otros modelos de este manual:Blu-Ray - DMC-J3 (412.82 kb)