Votos - 2, Puntuación media: 4
(
)
)
|
Resumen del manual
dHDMI OUT (Type A) Connect to TV with HDMI inputs. (Interface for digital audio and video) eLAN port Connect a network with an always-on broadband connection. fVIDEO OUT Connect to a TV with video inputs. g2CH AUDIO OUT (Left/Right) Connect to a TV with 2 channel audio inputs. hDIGITAL AUDIO OUT (OPTICAL) Connect to digital (optical) audio equipment. abcdefgh Remote Control abcd • • • • • • • • • • a • • • • • • • • • STANDBY/ON (1/'): Switches the player ON or OFF. PIP AUDIO¦ ¦¦: Switch on/off Secondary Audio (BD-ROM only). PIP¦ ¦¦: Switches on/off Secondary Video (Picture-in-picture) (BD-ROM only). ¦ Depending on a disc type or the pre-recorded contents of the BD-ROM disc, different functions may be executed than other media or there are no responses when pressing some buttons (depending on media used). OPEN/CLOSE (Z): Opens and closes the disc tray. 0-9 numerical buttons: Select numbered options in a menu. CLEAR: Removes a mark on the search menu or a number when setting the password. JVC TV Control Buttons: • TV STANDBY/ON (1/'): Turn the TV on or off. • INPUT: Switch the TV’s input source between the TV and other input sources. • CH (+/-): Scan up or down through memorized channels. • VOL (+/-): Adjust the volume of the TV. • MUTING: Temporarily turns TV sound OFF, press again to restore. • • • • • • • • • • b • • • • • • • • • m / M (SCAN): Search backward or forward. . / > (SKIP): Go to next or previous chapter / track / file. X (PAUSE/STEP): Pauses playback. N (PLAY): Starts playback. x (STOP): Stops playback. • • • • • • • • • • c • • • • • • • • • HOME: Displays or exits the [Home Menu]. DISC MENU: Accesses menu on a disc. Direction buttons: Select an option in the menu. ENTER ( ): Acknowledges menu selection. RETURN (O): Exits or closes the menu, or resumes playback. The resume play function may work depending on the BD-ROM disc. DISPLAY: Displays or exits On- Screen Display. AUDIO: Selects an audio language or audio channel. SUBTITLE: Selects a subtitle language. SUBTITLE ON/OFF: Switches the subtitle on or off. TITLE/POP-UP: Displays the DVD title menu or BD-ROM’s popup menu, if available. • • • • • • • • • • d • • • • • • • • • Color (R, G, B, Y) buttons: Use to navigate BD-ROM menus. They are also used for [MOVIE], [PHOTO] and [MUSIC] menu. MARKER: Marks any point during playback. SEARCH: Displays or exits the search menu. REPEAT: Repeat a desired section. ZOOM: Displays or exits the [Zoom] menu. RESOLUTION: Sets the output resolution for HDMI and COMPONENT VIDEO OUT jacks. : This button is not available. Remote Control Operation Remote Control Battery Installation Remove the battery cover on press the buttons. Point the Remote Control at the remote sensor and the rear of the Remote Control, and insert a R03 (size AAA) Caution battery with and matched • Do not mix old and new batteries and never mix difcorrectly. ferent types of batteries such as standard, alkaline, etc. • Do not put the batteries in the place where young children can reach. 12 13 Installation HDMI connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable. 1. Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor (H). 2. Set the TV’s source to HDMI (refer to TV’s Owner’s manual). Notes: You must select a HDMI audio output and a maximum sampling frequency that your TV accepts using [HDMI] and [Sampling Freq.] options on the setup menu (see page 20). If a connected HDMI device does not accept the audio output of the unit, the HDMI device’s audio sound may be distorted or may not output. Tips: • When you use HDMI connection, you can change the resolution for the HDMI output. (Refer to “Resolution Setting” on page 17.) • Select the type of video output from the HDMI OUT jack using [HDMI Color Setting] option on the [Setup] menu (see page 19). Cautions Changing the resolution when the connection has already been established may result in malfunc- tions. To solve the problem, turn off the player and then turn it on again. When the HDMI connection with HDCP is not veri- fied, TV screen is changed to black screen. In this case, check the the HDMI connection, or discon- nect the HDMI cable. If there is noise or lines on the screen, please check the HDMI cable (length is generally limited to 15ft). Additional Information for HDMI When you connect a HDMI or DVI compatible device make sure of the following: -Try switching off the HDMI/DVI device and this player. Next, switch on the HDMI/DVI device and leave it for around 30 seconds, then switch on this player. -The connected device’s video input is set cor- rectly for this unit. -The connected device is compatible with 720x480p, 1280x720p, 1920x1080i or 1920x1080p video input. Not all HDCP-compatible HDMI or DVI devices will work with this player. -The picture will not be displayed properly with non-HDCP device. -This player does not playback and TV screen is changed to black screen. Rear of the player HDMI HDMI...
Otros modelos de este manual:Blu-Ray - 0609SKMLGEEGL (1.8 mb)
Blu-Ray - MFL62026457 (1.8 mb)