Votos - 2, Puntuación media: 3.5
(
)
)
|
Resumen del manual
• USB device: USB device that supports USB1.1 and USB2.0. • Movie, music and photo files can be played. For details of operations on each file, refer to relevant pages. • Regular back up is recommended to prevent data loss. • If you use a USB extension cable, USB HUB or USB Multi-reader, the USB device may not be recognized. • Some USB device may not work with this unit. • Digital camera and mobile phone are not supported. • USB Port of the unit cannot be connected to PC. The unit cannot be used as a storage device. BD572-N-BUSALLK-ENG.indd 26 2010.2.1 4:43:2 PM Installation 27 4. Use U/u to select a second setup option, Settings and press ENTER ( ) to move to the third level. Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME ( ). 2. Use I/i to select the [Setup] and press ENTER ( ). The [Setup] menu appears. 3. Use U/u to select the first setup option, and press i to move to the second level. 5. Use U/u to select a desired setting, and press ENTER ( ) to confirm your selection. [DISPLAY] Menu TV Aspect Ratio Select a TV aspect ratio option according to your TV type. [4:3 Letter Box] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] Select when a standard 4:3 TV is connected. Displays pictures cropped to fill your TV screen. Both sides of the picture are cut off . [16:9 Original] Select when a 16:9 wide TV is connected. The 4:3 picture is displayed with an original 4:3 aspect ratio, with black bars appearing at the left and right sides. [16:9 Full] Select when a 16:9 wide TV is connected. The 4:3 picture is adjusted horizontally (in a linear proportion) to fill the entire screen. 3 Installation BD572-N-BUSALLK-ENG.indd 27 2010.2.1 4:43:2 PM 28 Installation 3 Installation NOTE You cannot select [4:3 Letter Box] and [4:3 Pan Scan] option when the resolution is set to higher than 720p. Resolution Sets the output resolution of the Component and HDMI video signal. Refer to page 17 and 86 for details about the resolution setting. [Auto] If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. If the COMPONENT VIDEO OUT is only connected, this changes the resolution to 1080i as default resolution. [1080p] Outputs 1080 lines of progressive video. [1080i] Outputs 1080 lines of interlaced video. [720p] Outputs 720 lines of progressive video. [480p] Outputs 480 lines of progressive video. [480i] Outputs 480 lines of interlaced video. 1080p Display Mode When the resolution is set to 1080p, select [24 Hz] for smooth presentation of film material (1080p/24 Hz) with a HDMI-equipped display compatible with 1080p/24 Hz input. NOTE • When you select [24 Hz], you may experience some picture disturbance when the video switches video and film material. In this case, select [60 Hz]. • Even when [1080p Display Mode] is set to [24 Hz], if your TV is not compatible with 1080p/24 Hz, the actual frame frequency of the video output will be 60 Hz to match the video source format. HDMI Color Setting Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [YCbCr] Select when connecting to a HDMI display device. [RGB] Select when connecting to a DVI display device. BD572-N-BUSALLK-ENG.indd 28 2010.2.1 4:43:3 PM Installation 29 [LANGUAGE] Menu Display Menu Select a language for the [Setup] menu and on-screen display. Disc Menu/Disc Audio/ Disc Subtitle Select the language you prefer for the audio track (disc audio), subtitles, and the disc menu. [Original] Refers to the original language in which the disc was recorded. [Other] Press ENTER ( ) to select another language. Use number buttons then press ENTER ( ) to enter the corresponding 4-digit number according to the language code list on page 81. [Off ] (Disc Subtitle only) Turn off Subtitle. NOTE Depending on the disc, your language setting may not work. [AUDIO] Menu Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. NOTE Since many factors affect the type of audio output, see “Audio Output Specifications” on page 84-85 for details. HDMI / Digital Output (SPDIF) Select the output sound format when a device equipped with a HDMI or Digital Audio input jack is connected to the HDMI OUT or DIGITAL AUDIO OUT jack on this player. [PCM Stereo] Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with two-channel digital stereo decoder. [PCM Multi-Ch] (HDMI only) Select if you connect this unit’s HDMI OUT jack to a device with multi-channel digital decoder. [DTS Re-Encode] Select if you connect this unit’s HDMI OUT or DIGITAL AUDIO OUT jack to a device with DTS decoder. [Primary Pass-Thru] Select if you connect this unit’s DIGITAL AUDIO OUT and HDMI OUT jack to a device with LPCM, Dolby Digital, Dolby Digit...