Votos - 4, Puntuación media: 3.5
(
)
)
|
Resumen del manual
BDV-E870 BDV-E570/BDV-E470/BDVE370/ BDV-T57/BDV-T37 For the front speakers For the center speaker 8 to 10 mm (11/32 to 13/32 inch) 219 mm (8 5/8 inches) 304 mm (12 inches) For the center speaker 8 to 10 mm (11/32 to 13/32 inch) 219 mm (8 5/8 inches) 8 to 10 mm (11/32 to 13/32 inch) For the other speakers 8 to 10 mm (11/32 to 13/32 inch) For the surround speakers 8 to 10 mm (11/32 to 13/32 inch) 20US 3 3 Hole on the back of the speaker 5 mm (7/32 inch) 10 mm (13/32 inch) Rear of the speaker Getting Started 21US FRONT SPEAKERS FRONT L SUBWOO R CENTER SPEAKERS SUR R SUR L Green (Center speaker) Purple (Subwoofer) White Red (Front right speaker (R)) Gray (Surround right speaker (R)) Blue (Surround left speaker (L)) FRONT SPEAKERS FRONT L SUBWOO R CENTER SPEAKERS SUR R SUR L Green (Center speaker) Purple (Subwoofer) White Red (Front right speaker (R)) Gray (Surround right speaker (R)) Blue (Surround left speaker (L)) For connecting the system, read the information on the following pages. Do not connect the AC power cord (mains lead) of the unit to a wall outlet (mains) until all the other connections are made. Note • When you connect another component with a volume control, turn down the volume of the other components to a level where sound is not distorted. Connecting the speakers The connector of the speaker cords and the color tube are color-coded depending on the type of speaker. Connect the speaker cords to match the color of the SPEAKERS jacks of the unit. Be sure to match the speaker cords to the appropriate terminals on the speakers: the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Do not catch the speaker cord insulation (rubber covering) in the speaker terminals. To connect speaker cords to the unit When connecting to the unit, insert the connector until it clicks. Rear panel of the unit (Front left speaker (L)) To connect speaker cords to the speaker Color tube (–) (+) Connector Rear or bottom of the speaker Getting Started 22US Connecting the TV (Video connection) Connecting the TV (Video connection) . Depending on the jacks on your TV, select the connection method. COMP E T VIDE T VIDEO OUT Y PB / CB PR / CR OUT ARC C Video cord (supplied) A HDMI cable* B Component video cable (not supplied) Rear panel of the unit To the component To the video input To the HDMI IN jack video input jacks of jack of the TV. of the TV. the TV. * The HDMI cable is supplied with BDV-E370 (Latin American models), BDV-T57, and BDV-T37 only. Method 1: HDMI cable (A) connection If your TV has an HDMI jack, connect to the TV with an HDMI cable. Picture quality will be improved compared to using the component video cable connection or the video cord connection. When connecting with the HDMI cable, you need to select the type of output signal (page 55). Method 2: Component video cable (B) connection If your TV does not have an HDMI jack, but has component video input jacks, connect to the TV with a component video cable. Picture quality will be improved compared to using the video cord connection. When connecting with the component video cable, you need to select the type of output signal (page 55). Method 3: Video cord (C) connection If you do not have an HDMI cable or a component video cable, temporarily make this connection. 23US Getting Started Getting Started Getting Started This connection sends an audio signal to the unit from the TV. To listen to TV sound via the system, perform this connection. AUDIO AUDIO INRL DIGITAL IN COAXIAL SAT/CABLE DIGITAL INTV OPTICAL Digital optical cord (not supplied) Rear panel of the unit To the digital optical out jack of the TV. With a digital audio connection, the system receives a Dolby Digital multiplex broadcast signal and you can enjoy multiplex broadcast sound. Note • When you connect the TV and the unit with an audio cord, see “Connecting the other components” (page 25). About Audio Return Channel If your TV is compatible with the Audio Return Channel function, an HDMI cable connection also sends a digital audio signal from the TV. You do not need to make a separate audio connection for listening to TV sound. For details of the Audio Return Channel function, see [Audio Return Channel] (page 58). Note • A digital optical cable connection has priority over the Audio Return Channel function via HDMI cable connection. 24US Connecting the other components Connecting the other components TV System Signal flow : Audio signal : Video signal You can enjoy connected components via the system’s speakers. • VCR or digital satellite receiver, etc. (not supplied), which has a digital coaxial output jack: D • VCR, digital satellite receiver, PlayStation, or portable audio source, etc. (not supplied): E DIGITAL IN COAXIAL SAT/CABLE DIGITAL INTV OPTICAL AUDIO ARL E Audio cord (not supplied) D Digital coaxial cord (not supplied) Rear panel of the unit To the digital coaxial out jack To the audio out jacks of the VCR, of the VCR or digital satellite digita...