Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Insert the disc supplied with the CD-R/RW drive in the drive. Follow the instructions displayed on the screen to install the utility. Refer to the separate utility documentation for further details. Store the utility disc in a safe place. Connecting the CablesSetup Installing the Device Driver No additional device driver is needed for Windows 98/2000/ME/XP/NT4.0, as the default Windows device driver is used. You can check that the CD-R/RW drive has been correctly detected by Windows. To do so, proceed as follows. Double-click on the My Computer icon on your desktop. Double-click on the Control Panel folder. Double-click on the System icon. Click on the Device Manager tab. Expand the CD-ROM branch. The SAMSUNG CD-R/RW SW - *** device name is displayed. The SAMSUNG device driver enables discs in the CD-R/RW drive to be read but not recorded in an MS-DOS environment; the driver is located in the D driver folder on the CD record utility disc. Connecting the CablesSetup Setting Up the Device Driver Automatic Setup Manual Setup The device driver is located in the Ddriver folder of the CD Record Utility disc which is provided in the package. Insert the CD Record Utility disc into the CD-ROM drive and open the Ddriver folder. Run the CDSETUP.EXE file in the Ddriver folder. When Setup is successfully completed, click OK button or press the Enter key. Reboot the computer. Make the C:\SAMSUNG directory. Copy the files from the diskette to the C:\SAMSUNG directory. To do so, type COPY D:\Ddriver * . * C:\SAMSUNG after the C:\prompt and press [Enter]. Edit the CONFIG.SYS file. Add the DEVICE=C:\SAMSUNG\SSCDROM.SYS \D:SSCD000/V entry. Edit the AUTOEXEC.BAT file. Add the C:\SAMSUNG\MSCDEX/D:SSCD000 entry. Reboot the computer. Connecting the CablesUsing the Drive Using the CD-R/RW Drive To play audio or video CDs in your CD-R/RW drive, proceed as follows. Push the power button and boot the computer. After booting the computer, open the disc compartment by pressing the Eject button. Insert the disc (CD) with the label on the disc facing upwards and close the disc compartment by pressing the Eject button. The indicator light comes on. Play the disc (CD). Accessories .. The type of accessories varies depending on product model. User Manual & Setup Guide. Software. Screws. Design and specifications are subject to change without prior notice. Connecting the CablesUsing the Drive Storing and Cleaning Your Discs To ensure a long service life for your discs and drive, follow the pre-cautions below when storing and cleaning your discs. Do not place a disc in direct sunlight. Store a disc vertically in a well-ventilated and stable location. Do not write or attach a label on a disc. Do not drop a disc or place heavy objects on it. Do not touch the surface of a disc; hold it by the edges. To clean a disc, polish lightly from the inside of the disc to the outside with a soft cotton cloth. Do not leave the disc compartment open when you are not using it. Connecting the CablesUsing the Drive What is a MAGIC SPEED? The MAGIC SPEED provides a function that user optionally chooses the disc reading speeds, high speed (Max speed) mode and low noise (X32) mode. The low noise mode offers the best PC environment by minimizing a driving noise. The Magic speed not only functions to decrease a noise by reducing a reading speed but also gets a preventive effect of a disc breakage, which could be occurred by a high speed. Its purpose is to supply the stable PC environment to user. Explanation of MAGIC SPEED Mode and Ways to use Explanation of MAGIC SPEED Mode The Maximum Speed Mode : Set up this mode when you want to read a disc by the maximum speed which is supplied by a drive. The Low Noise Mode : Set up this mode when you want to read a disc by a stable speed, the low speed (X32). The mode selected and set using the Magic Speed feature does not change when you connect the driver to a different PC. Make sure you check the settings before use. Caution: In case of a cracked disc, the disc would be broken if operating in the maximum speed. Therefore, it is recommended to operate in the low noise mode or to immediately make a copy and use it. Ways to Use the MAGIC SPEED The first of all, please install the Magic Speed program from Samsung's homepage. Operate the program by clicking the right mouse button on the MAGIC SPEED Tray Icon. Select a desired mode from a program window, and click "Setup" The reading speed of a drive operates in a selected mode. Close the program window by selecting "Close". At this time, the reading speed will keep operating by the changed speed unless you would change a mode and would end a program. It is recommended to use a "Maximum Speed Mode" when operating a Data Copy & a Disc Copy and to use a "Low Noise Mode" when operating a general operation. Other Function Method to release an automatic operation: This program automatically operates when PC is booting. If you wish to release the automatic operation, release the selec...