If the disc has a crack (especially around the center hole), it is recommended to make a copy immediately and use the copy instead. When a cracked disc is used continuously, the size of the crack is likely to grow and this will eventually result in irreparable damage to the disc. ■ ■ Important to read and understand at all times. SAMSUNG DIGIТай) everyone’s invite Avoid high-humidity environments. SAMSUNG DIGIТай) everyone’s invite Handle with caution to prevent damage from external shock. > Do not drop the drive, and protect it fromsevere shocks. - It can damage the drive or cause it to malfunction. > Do not move the drive while in operation and do not attempt to open the disc tray byforce. Make sure to close all working programs before attempting to open the tray and always usethe open/close button. - Do not insert a pin into the emergency opening while in operation. > Do not use cracked, distorted or damaged discs. - In particular, a disc with a crack on the inner tracks may break while in use. SAMSUNG DIGIТай) everyone’s invite if there is only one DVD-ROM drive, select M A (Master). a : Master Drive (Choose the MA Jumper) b : Hard Drive c : MainBoard d : Primary 1 e : Secondly 1 SAMSUNG DIGIТай) everyone’s invite If there is two DVD-ROM drive, select MA (Master) / SL (Slave). a : Master Drive (Choose the MA Jumper) b : Slave Drive (Choose the SL Jumper) c : Hard Drive d : MainBoard e : Primary 1 f : Secondly 1 3. Installing a jumper on the master/slave select terminal Connect a jumper to the rear side of the DVD-ROM. If the jumper is connected to MA (Master), it will work in the Master mode. If the jumper is connected to SL (Slave), it will work in the Slave mode. If the jumper is connected to CS (CSEL), you can control the device by using the host interface signal CSEL. (In general, connection to MA is recommended.) 4. Connecting the audio cable from a sound card ...
)
