Votos - 4, Puntuación media: 3.3
(
)
)
|
Resumen del manual
CD-ROMs that can read low reflectance. 2. CD-ROMs that support Packet Write. . Please note: Certain software (i.e. particularly those including Video playback) may require a considerably increased specification PC to give acceptable results. While this Super Multi DVD Rewriter can read DVD-video discs, decoding them to display on your pc’s monitor requires separate MPEG decoding that is done by separate hardware (either an MPEG decoder card or MPEG decoding done by your video card), or separate software that you install to do MPEG decoding. For further details, refer to the documentation that comes with MPEG software. Location and Function of Controls Front Panel Rear Panel 12 4 1 23 1. Disc Tray 1. SATA Power Connector (15 pin) 2. Emergency Eject Hole 2. SATA Data Connector (7 pin) 3. Stop/Eject Button 4. Drive activity indicator 3 Installing the Drive Before installing the drive, please note the following points. ¦ You will need the following: • A screw driver of a suitable size to fit the securing screws for the drive unit. • The manual for the computer, so you can find the mounting positions for the SATA cable. ¦ Turn off all peripheral appliances of the computer and the computer itself, and disconnect their power cords from the wall sockets. ¦ Discharge any static electricity on your person by touching the computer covers, etc. Removing the Computer Cover Make sure all peripheral devices of the computer and the computer itself are turned off, and then remove the cover. Refer to the manual for the computer for details about removing the cover. NOTE : There may be sharp edges inside the computer so take care to avoid injury. Mounting the Drive 1. Remove the 51/4. drive bay panel from the computer. Refer to the manual for the computer for details. 2. Insert the drive unit into the bay. Do not apply excessive pressure to the cables inside the computer. 3. Secure the drive with the screws. If there is not enough space behind the drive, connect the SATA and other cables before securing the drive. NOTE : This is a general installation guide. If your PC hardware appears different, please consult your hardware manual for installing peripheral devices. 4 PC Connection The Super Multi DVD Rewriter connects to the motherboard of the host computer using a SATA interface cable. Data cable Power cable Data cablePower cable Connecting the SATA Power Cable Connect the power cable so the projection of the cable connector side to come to the left side. Be careful not to connect upside down. NOTE : Improper connection may damage the drive and void the warranty. Generally, the power connector can only fit one way. Red Connect to the power connector of the PC. Connecting the SATA Data Cable Connect the data cable. Be careful not to connect upside down. 5 Connect to the SATA connector on the PC's Motherboard. Device Drivers When using Windows XP Home Edition/XP Professional/Vista, no special device driver is required. Your system, upon Power On and bootup after installing and connecting the new Super Multi DVD Rewriter, will recognize and load native software drivers automatically. Please consult the following internet sites: (then choose your country from the list) For Windows XP/Vista Users ¦ In order to ensure normal drive operation, please check the following: • The drive is displayed in Windows XP : [Control Panel]-[System]-[Hardware]-[Device Manager][ DVD/CD-ROM-drives] Windows Vista : [Control Panel]-[Device Manager]-[DVD/CD-ROM-drives] • 32-bit is displayed in [Control Panel]-[System]-[Performance] ¦ If the drive is not recognized by your computer, please check the following items. • If an indicato...
Otros modelos de este manual:unidades de CD / DVD - GH22 (274.82 kb)
unidades de CD / DVD - GH22LS50-BlackRetail (274.82 kb)
unidades de CD / DVD - GH22NS50 (274.82 kb)
unidades de CD / DVD - GH22NS50-BlackBare (274.82 kb)