Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
And then, insert the supplied software CD into the External Drive and install the software. • Please do not connect the AC adapter and USB 3.0 converter cable by any means other than specified above. • For optimal performance, using the ‘USB Booster Program’ in the Software CD is recommended when you connect the USB cable. Connecting to computer NOTES NOTES To AC wall outlet. USB 3.0 Converter cable 7 Removing the USB converter cable The drive supports the plug and play(not swap) function of Windows, and can be removed and inserted by performing the following operation. 1. Stop the application software being currently used. 2. Click the icon “ ” of the taskbar located on your screen’s bottom right side. 3. Click “Safely Remove USB Mass Storage Device-Drive[x:]”. 4. Click “Ok” and then remove the USB converter cable. NOTE Don’t remove the USB converter cable when the busy indicator on the drive blinks, or during computer startup. 8 Operation Operation Loading and ejecting a disc Remember - AC adapter must be connected. Make sure the power is turned on. Loading a disc 1. Touch the Eject Button to open the Disc tray. 2. Load a disc. (Label facing up.) 3. Close the Disc tray. Ejecting a disc 1. Touch the Open/Close Button to open the Disc tray. 2. Removing the disc. 3. Close the Disc tray after removing the disc. Emergency Eject This drive has a feature that allows the CD to be ejected manually in case of a drive failure or a power outage. NOTE: Don’t use this feature except in an emergency. 1) Turn the power switch OFF. 2) Poke a fine-tipped object (such as a straightened heavy duty paper clip) into the small hole above the eject button. The front door will pop open and the disk tray will come partway out. 3) Pull the front door to open it all the way, then grip the disc tray between thumb and forefinger and gently pull it straight out. NOTE: Use this feature for an emergency purpose only. Using it excessively will cause malfunction. * If you cannot get a good grip on the disc tray with your fingers, use a steel binder clip or spring clamp to pull it out. 9 9 Playing a music CD Listening to sound When connected to a computer, you can play audio CD’s through your computer’s audio system after setting Digital Audio mode. Check your Windows or “Windows Media Player” manual for detail. NOTES • DVD video region code: Each region around the world has a different region number on the DVD video movies being sold in a region. The region code can be changed to other regions up to 5 times by using the software decoder. If you change the region code 5 times, the drive will lock onto the last (5th change) region code, and cannot change the drive to another region code. This limitation is a requirement as licensees of DVD drive technology. • When connecting with USB1.1 interface, due to it’s slow transfer rate, picture and sound may be disrupted when trying to view a DVD/BD movie. Appendix Appendix Troubleshooting If you are experiencing problems with the drive, verify the following items. Since the problem may be caused by a device other than the drive, check other things such as system settings or other software being used, etc. If you cannot resolve the problem after verifying these items, contact your dealer or our customer service department. Problem Possible Cause Possible Solution Drive cannot play a 1. The disc is not inserted 1. Reinsert the disc DVD, CD or BD in correctly. correctly. the drive or certain 2. The disc is dirty. 2. Clean the disc surface. types of discs cannot 3. The pick-up lens is dirty. 3. Clean the pick-up lens. be read in the drive. 4. The disc is scratched or warped. 5. The disc uses a region code that cannot be played on the drive. 4. Change the disc. 5. Refer to your system manual for help. Disc tray cannot be opened 1. AC Plug is not connected to AC outlet. 2. Power Switch is not turned on. 1. Connect the AC plug tightly. 2. Turn the Power Switch on and try again. Drive is not detected 1. The USB 3.0 converter 1.Make sure USB 3.0 converter by the system. cable is not properly connected. cable is connected properly and re-install the device driver. Drive will not play media or certain types of CD, DVD or BD media. 1. The disc doesn’t match your system. Is the media disc the correct format for the type of system that you are using. 2. Virus possibility. 1. Check the disc format. 2. Has the Windows DVD-ROM software driver program been corrupted by a virus? Run a Virus Scan program and repair if possible. 10 Specifications Interface USB 2.0 & 3.0 General Supported Discs BD-ROM (SL/DL), BD-R (SL/DL), BD-R LTH, BD-RE (SL/DL), DVD-ROM (SL/DL), DVD-R (SL/DL), DVDRW, DVD-RAM, M-DISC (DVD+R SL), DVD+R (SL/DL), DVD+RW, CD-ROM Mode-1, Mode-2 data disc, CD-ROM XA, CD-I, Photo-CD Multi-Session, Video CD, CD-Audio Disc, Mixed mode CD-ROM disc (data and audio), CD-Extra, CD-Text, CD-R, CD-RW Dimensions (WxHxD) 160 x 50 x 222 (mm) Weights About 1.05 Kg Write/Read speed Performance Media Write Read BD-ROM (SL...