Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
3.) Use the / buttons to select the first track to be programmed. (Example: Track 08). 4.) Whentrack number“08”flashes inthedisplay,press the PROGRAM button once again to enter the track “08”inprogram memorynumber “01”.Track number “08” disappears and program memory number returns to “00”, indicating that you may now select a track to be entered in program memory number “02”. PROG PROG PROG 5.) Use the / buttons to select the next track to be programmed. When the desired track number appears in the display press the PROGRAM button again to enter that track in the program memory. 6.) RepeatStep 5 untilyouhave enteredup to 20tracks in the program memory. When the memory is full, “--”indicator flashes. 7.) To begin programmed playback press the PLAY/ PAUSE button. The LCD display will show the first programmed track and playback will begin on that track. The PROG Indicator flashes. PROG PROG PLAY 11 PD6513_D120403.p65 11 4/12/2003, 16:17 After the last programmed track has played the player stops but the program remains in the memory. To play the programmed tracks again, press the PROGRAM button, then the PLAY/PAUSE button. To cancel the programmed sequence from memory press the PROGRAM button, then press the STOP button, open the CD door, or move the FUNCTION selector to the TAPE (RADIO OFF) position. Program Repeat Playback You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks. First, program the desired tracks according to Steps 1 through 7 in previous page. When Programmed Playback begins press the REPEAT button twice to activate the All Tracks Repeat feature. The REP. A Indicator appears in LCD display and all the tracks in your programmed sequence will be PROG PLAY REP. A repeated continuously. 12 PD6513_D120403.p65 12 4/12/2003, 16:17 PLAYING CASSETTE TAPES 1.) Open the cassette door by pressing the STOP / EJECT key. .. 2.) Place a pre-recorded cassette tape into the slots on the inside of the door with the exposed tape facing up and the full reel on the right side. Close cassette door. 3.) Move the FUNCTION selector to the TAPE position. 4.) Press the cassette PLAY key to begin playback. 5.) Set the Volume and BASS BOOST controls as desired. 6.) To advance the tape rapidly press the F. FWD key. To stop the tape before it ends press the STOP /EJECT key. .. 7.) To rewind the tape rapidly press the REW key. To stop the tape before it ends press the STOP /EJECT key. .. 7.) When the tape ends the Automatic Stop System releases the PLAY key and shuts off the tape motor. You may then open the cassette door, remove your tape, turn it over and play the other side if desired. 8.) When you are finished listening, stop the tape, open the door, remove the tape and close the door. If you are playing a tape and then switch to the RADIO or CD function be sure to press the STOP /EJECT key to disengage the tape mechanism. This prevents excess wear and tear on the mechanism. IMPORTANT: Always press the STOP /EJECT key to shut off the tape motor before opening the cassette door to remove your tape. The Automatic Stop System does not function in the F. FWD and REW modes. When the tape ends in the F. FWD and REW modes the motor continues to run. You must press the STOP /EJECT key to shut off the motor before opening the door to remove your tape. 13 PD6513_D120403.p65 13 4/12/2003, 16:17 MAKING A TAPE RECORDING This model allows you to make tape recordings directly from the CD player, the radio, or “live”through the built in condenser microphone. • Refer to “PLAYING COMPACT DISCS”if necessary to operate the CD player. • Refer to “LISTENING TO THE RADIO”if necessary to tune in the station you wish to record from radio. • To make a “live”recording through the built in condenser microphone, set the FUNCTION selector to the TAPE (RADIO OFF) position. 1.) Press the STOP /EJECT key to open the cassette door. .. 2.) Insert a good quality blank cassette tape into the slots on the cassette door with the open end facing up and the full reel on the right. Use normal tape only. Do not use tape identified as “CrO2” (Chrome) or “Metal” tape formulations. For best results use tapes of 60 minutes (C-60) or less. Do not use 90 minute or 120 minute tapes as these thinner tapes are more likely to jam in the mechanism. 3.) Close the cassette door. 4.) When you are ready to start recording press the RECORD key. The PLAY YY key will also engage. The CD you are playing, or radio program you selected will be recorded directly on to the tape. 5.) If you are making a “live”recording all of the sounds picked up by the condenser microphone will be recorded directly on to the tape. For best results when making “live”recordings try to stay within six feet of the condenser microphone. 6.) Press the PAUSE key during recording to stop the tape temporarily and avoid recording unwanted material such as radio commercials. 7.) When you have finished recording press the STOP /EJECT key to stop and remove the ...