Votos - 2, Puntuación media: 5
(
)
)
|
Resumen del manual
• Do not attempt to clean this unit with chemical solvents as this might damage the finish. Use a clean dry cloth. • Operate controls and switches as described in the manual. • Before turning on the power, make certain that the connecting cords, if any, and power cord are properly installed. • Store your CDs in a cool area to avoid damage from heat. • When moving the set, be sure to first disconnect the AC power cord. FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: •Reorient or relocate the receiving antenna. •Increase the separation between the equipment and receiver. •Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. •Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 3 PD5098_ib_082003.p65 3 20/8/2003, 16:57 PREPARATION FOR USE UNPACKING AND SET-UP • Carefully remove the unit from the carton and remove all packing material from the unit. • Remove any labels or stickers which may be on the front or top of the set, but do not remove any labels from the back or bottom. • Press the CD door OPEN button and remove the dummy CD display card from the CD compartment. • We suggest that you retain the original carton and packing materials in case it ever becomes necessary to return your unit for service. This is the only sure way to protect the unit from damage in transit. • If you do dispose of the carton and packing materials, please do so properly. Emerson cares about our environment. IMPORTANT INFORMATION • Playing CD’s at higher volume levels increases the battery drain and shortens the battery life. Try to use AC power whenever it is available. • You must remove the AC Power Cord from the AC Cord Socket on the back cabinet in order to operate the unit on batteries. • We recommend using alkaline batteries for the longest possible life. • Change the batteries when the output of the unit becomes weak or the sound becomes distorted. Always change all six (6) batteries at the same time. • If the unit will be stored and not used for 30 days or more it is recommended to remove the batteries from the battery compartment to reduce the possibility of damage from battery leakage or corrosion. BATTERY PRECAUTIONS Follow these precautions when using batteries in this device: 1. Use only the size and type of batteries specified. 2. Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed batteries may cause damage to the device. 3. Do not mix different types of batteries together (e.g. Alkaline and Carbon-Zinc) or old batteries with fresh ones. 4. If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible battery leakage. 5. Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery manufacturer’s directions.) 4 PD5098_ib_082003.p65 4 20/8/2003, 16:57 5 1.) AC Socket (At back cabinet). 2.) Speaker. 3.) Dial Scale. 4.) PHONES Jack. 5.) CD Display. 6.) CD Door. 7.) Battery Compartment. (At back cabinet). 8.) Carrying Handle. 9.) VOLUME Control. 10.) Function Selector Switch. (POWER OFF/AM/FM/CD) LOCATION OF CONTROLS AND INDICATORS 11.) Telescopic Antenna. 12.) TUNING Control. 13.) PLAY/PAUSE Button. 14.) REV. SKIP/SEARCH Button. 15.) FWD. SKIP/SEARCH Button. 16.) REPEAT Button. 17.) PROGRAM Button. 18.) STOP Button. 19.) CDDoor OPEN Button. FRONT VIEW TOP VIEW PD5098_ib_082003.p65 5 20/8/2003, 16:57 POWER SUPPLY AC OPERATION Connect the smaller end of the AC power cord to the AC socket on the back cabinet. Insert the plug into your 120 volt 60Hz household AC outlet. AC Plug AC Outlet CAUTION To prevent electrical shock, match wide blade of plug to wide slot and insert fully. BATTERY OPERATION Disconnect the AC power cord from the AC socket of the unit. Battery power is cut automatically while the cord the is connected. When the volume decreases, or the sound distorts, r...