Votos - 2, Puntuación media: 4.5
(
)
)
|
Resumen del manual
Recalling ISR Press the ISR button 4 then the display will show “ISR”, then the radio station previously memorized will be selected. Press the ISR button 4 again to disengage the unit from the Recalling ISR function. Area Change Use this function when you are using the car stereo anywhere outside the U.S. Switchable frequency spacing This car stereo is initially set to tune in frequency intervals of 10 kHz for AM and 200 kHz for FM, the standard calibrations in the U.S. When using the unit outside the U.S., use the following procedure to switch the frequency range. The table below lists the frequency specifications for the U.S. and other countries. Initial Setting (U.S. standard) New Setting (outside U.S.) AM Frequency spacing 10 kHz 9 kHz Frequency range 530 to 1,710 kHz 531 to 1,629 kHz FM Frequency spacing 200 kHz 50 kHz Frequency range 87.9 to 107.9 MHz 87.5 to 108 MHz Switching the area change Outside U.S. (New Setting) While pressing the BND button !, press the SRCH Left button @, then “outside U.S.” will be selected. Inside U.S. standard (Initial Setting) While pressing the BND button !, press the SRCH Right button @, then the “U.S. standard” will be selected. 12 BD416 CD Mode Operations Loading a Disc 1. Press Open button 1 to access the CD insertion slot behind the FLIP DOWN. 2. Insert the disc into the CD insertion slot with its label side up, then the CD will start playing. For 5-inch (12 cm) CD For 3-inch (8 cm) single CD * When inserting a single CD (3”(8 cm)), insert it from the center of the slot. * When inserting a single CD (3”(8 cm)), do not connect an adapter. Notes: • Some CDs recorded in CD-R mode may not be usable. • Even when recorded in CD-R/W mode, some CDs may not be usable. 3. Close the FLIP DOWN PANEL. CA UTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Note: • If the FLIP DOWN PANE, does not open fully, gently open with your hand. • After loading a CD, always close the FLIP DOWN PANEL. Listening to the Disc already Inserted Press the FNC button 3 to select the CD mode, the CD will start playing. Stopping (pausing) Playback Press the Play/Pause button $. “PAUS ” appears on the display. Press the Play/Pause button $ again to resume playback. Ejecting the CD 1. Press Open button 1 to open the FLIP DOWN PANEL. 2. Press Eject button % to eject the CD. Take it out from the ejected position. 3. Close the FLIP DOWN PANEL. CA UTION Be careful not to catch your hand or fingers while closing the FLIP DOWN PANEL. Notes: • If the FLIP DOWN PANEL does not open fully, gently open with your hand. • After taking out the CD, be sure to close the FLIP DOWN PANEL. . If a CD (12 cm) is left in the ejected position for 15 seconds, the CD is automatically reloaded (Auto reload). . 8 cm CDs are not auto reloaded. Be sure to remove it when ejected. Note: • If you force a CD into before auto reloading, this can damage the CD. Top Function Press the TOP button !, then the CD will start playing from the first song (track number 1). Selecting Tracks (songs) Press the SRCH Left/Right button @. : Playback will start from the next track. : Playback will start from the beginning of the track currently playing. When this button is pressed again, the CD will play from the previous track. Fast-Forward and Fast-Backward Press and hold the SRCH Left/Right button @. : To fast-forward : To fast-backward * Pressing the SRCH Left/Right button for 1 second or longer will move forward or backward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 30 times faster. E glis BD416 13 Scan Play (Intro Music Scan) Press the SCN button 8, then the display shows “SCN ”, then the CD will play the first 10 seconds of each track of the whole disc. Press the SCN button 8 again to disengage the unit from scan play. * A scan play will start from the track following the one currently playing. Repeat Play Press the RPT button 7, then the display shows “RPT ”, then the track currently playing will be played repeatedly. Press the RPT button 7 again to disengage the unit from repeat play. Random Play Press the RDM button 6, then the display will show “RDM ”, then the entire tracks on the disc will be played at random. Press the RDM button 6 again to disengage the unit from random play. English 9. TROUBLESHOOTING Pr ob lem Cause Measure GeneralPower does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. No sound output when operating the unit with amplifiers or power antenna attached. Power antenna lead is shorted to ground or excessive current is required for remote-on the amplifiers or power antenna. 1. Turn the unit off. 2. Remove all wires attached to the power antenna lead. Check each wire for a possible short to ground using an ohm meter. 3. Turn the unit back on. 4. Reconnect each amplifier remote wire to th...