Votos - 4, Puntuación media: 4.8
(
)
)
|
Resumen del manual
AU ГЮ OPERATING INSTRUCTIONS INSTRUCTIONS DE FONCTIONNEMENT MANUAL DE INSTRUCCIONES To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. EXPLANATION OF GRAPHICAL SYMBOLS: CONTENTS SYSTEM CONNECTIONS ............................................... PARTS IDENTIFICATIONS .............................................. ADJUSTING THE SOUND ............................................... SETTING THE SLEEP TIMER .......................................... FOR BETTER RECEPTION ............................................. TUNING INTO A STATION MANUALLY................................. PRESETTING STATIONS ..................................................... TUNING INTO A PRESET STATION...................................... COMPACT DISC PLAYBACK ................................................ COMPACT DISC PROGRAMMED PLAYBACK.................. STOPPING AND CANCELLING PROGRAMMED PLAYBACK CONTINUOUS PLAYBACK — FROM DECK B TO DECK A. DUBBING — FROM DECK B TO DECK A.......................... RECORDING — DECK A ONLY........................................... TROUBLE SHOOTING GUIDE .............................................. 3-4 13-16 .20-21 PRECAUTION Follow the advice below for safe and appropriate operation. ON PLACEMENT • Do not use the unit in places which are extremely hot, cold, dusty, or humid. • Place the unit on a flat and even surface. • Do not restrict the air flow through the ventilation slots by placing the unit on soft furnishings, by covering the unit with a cloth or by placing the unit on a carpet. ON AC VOLTAGE • Before using the unit, check that the rated voltage of your unit matches your local voltage. ON SAFETY • When connecting and disconnecting the AC cord, grip the plug and not the cord itself. Pulling the cord may damage it and create a hazard. • When you are not going to use the unit for a long period of time, disconnect the AC power cord. ON CONDENSATION • When left in a heated room where it is warm and damp, water droplets or condensation may from inside the CD player. f: • When there is condensation inside the unit, the S unit may not function normally. J- • Let it stand in a heated room for 1 to 2 hours to % allow the condensation to dry out. ? FCC information (For N. America) * This device complies with Part 15 of FCC rules. Operations are subject to the following two conditions: I [1 ] this device may not cause harmful interference, and |; [2] this device must accept any interference received, f? including interference that may cause undesirable f-operations. Should any trouble occur, disconnect the AC power cord and refer servicing to qualified personnel. E-2 SYSTEM CONNECTIONS Switch off the power before connecting speakers and other equipment. SPEAKER CORD CONNECTION Connect the wires with the printed white lines to the red (+) terminals and the plain-black wires to the black {-) terminals. Connecting speakers other than the speakers supplied with the unit, may Main Speakers (Left and Right) Speakers should be placed beside the audio system left and right side several feet apart. Do not place them too close to a colour television as they could cause incorrect colour to appear on the picture. Surround (Rear) Speakers (Left and Right) Speakers should be placed behind and aimed toward the viewing area. Centre Speaker Speaker should be placed between two main speakers at the top of audio system. NOTE: Centre speaker is magnetically shielded. Main Speakers (Left and Right) CONNECTION WITH OTHER OPTIONAL EQUIPMENT To listen to or record audio signals from external units through this unit: Connect the red plug to the R jack, and the white plug to the L jack to the AUX IN connector. Dolby Pro Logic surround sound can only be reproduced from a stereo sound source, such as a NICAM television, NIC AM video recorder, stereo video disc play or stereo satellite receiver. Some older kinds of stereo equipment will not work properly with Pro Logic sound recorders. To AC Outlet To External Source LISTENING TO THE CONNECTED EQUIPMENT 1. Press the FUNCTION button to AUX. 2. Play the external source. Note: If the external equipment is a television and this audio system is close to it, you may experience interference if the tuner function is selected while the television is working. CAUTION: • FOR U.S.A. AND CANADA To prevent electrical shock, match wide blade of plug to wide slot, fully insert. • Be sure the AC power cord is disconnected and all functions are off before making onnections. TO TURN ON THE UNIT Press the POWER button. The display will light up. Select the desired function and the corresponding function indicator will light up. AFTER USE Press the POWER button to enter STANDBY. The display light will fade and only the cfock display will be shown. E-3 SYSTEM CONNECTIONS Speaker Connections - 1. Connect Main Speaker wires (Left & Right) from the Main Speaker to the amplifier's 'MAI...