Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
Sliding the switch to the on position will turn the lights on. The off position will prevent the lights from turning on at all times, and the auto position will allow the lights to turn on and off with the vehicle’s interior lighting. Refer to the Installation Manual for the wire connections. Do not leave the vehicle unattended with the dome light switch in the on position, as this could result in a discharged battery. REV FWD SOURCE VOLUME FM SELECTON OFF AUTOPAUSE HEADPH ONES I NPUT AUDI O L R VIDEO IR S Dome Light Switch -14 REV FWD SOURCE VOLUME FM SELECTON OFF AUTOPAUSE HEADPHONES INPUT AUDI O L R VIDEO I R S Sensor Eye REV FWD SOURCE VOLUME FM SELECTON OFF AUTOPAUSE HEADPHONES INPUT AUDI O L R VIDEO I R S Sensor Eye Remote Sensor Remote The PROV715 /PROV715S/ PROV715P incorporates two Infrared sensors which relay signals from the remote control to allow the unit to be controlled simply by pointing its remote control at the remote sensor eye. The repeater function allows control of auxiliary equipment such as an Audiovox Video Cassette Player. The infrared sensor can relay signals from most manufacturer’s remote controls to its respective component connected to the Video 1 input. In this case you must use the remote control supplied with the component. Remote Sensor Eye Accessories Wireless Headphones The PROV715 /PROV715S/ PROV715P includes a built-in infrared transmitter for use with Audiovox wireless headphones (Part Number IR2CHS-Dual channel). The volume can then be adjusted using the controls on each headset. The wireless headphones must be used within a line of sight from the transmitter, as infrared transmissions, like visible light travel only in a straight line. See the documentation accompanying your Audiovox wireless headphones. IR2 Input Any line level audio source may be connected to this input (Satellite Radio, CD Changer etc). The audio program connected to the IR2 input can be received on the B channel of the dual channel wireless headphones (Part Number IR2CHS). Headset Special Features • Automatic Level Control prevents input signal over loading. • Uses high frequency infrared light to assure a clean signal for clear reception. -15 Wired Headphones There are two 1/8” headphone jacks on the PROV715 /PROV715S/ PROV715P that can be used with any standard wired stereo headphones. These jacks are controlled by the volume up / down buttons on the PROV715 /PROV715S/ PROV715P remote control. Wired FM Modulator The PROV715 /PROV715S/ PROV715P is equipped with an RF modulator, that allows you to listen to the PROV715 /PROV715S/ PROV715P audio signal by tuning your vehicle’s radio to the selected frequency, (88.3, 88.7, 89.1, 89.5, 89.9, 90.3MHz). This feature is accessed by using either the FM transmitter buttons on the remote (On/Off, Source Select, Channel Select) or the FM Select button on the unit. Whenever the RF modulator is on, broadcast reception on the vehicles radio will be poor. Switching off the FM modulator will allow normal radio reception. AV1 Input The video inputs may be connected to a Video cassette Player (VCP), video game system, or other audio / video devices. To access the A/V inputs, turn the PROV715/PROV715S/PROV715P on and press the source button on the PROV715/PROV715S/PROV715P or the Source button on the remote control until “AV1” is displayed on the screen. Turn the video source component on with its power button or remote control. The PROV715 /PROV715S/ PROV715P is now ready to play the audio and video signals from the source connected to AV1 input. AUX A/V Input The PROV715/PROV715S/PROV715P will accept an audio/video input through the RCA jacks located on the side of the unit. The audio / video device could be a video game system, video camera, or other input device. Video Out The PROV715/PROV715S/PROV715P provides a video output for an optional video monitor(s). (Refer to page 6 of the Installation Guide for more details.) This output will provide a video signal that duplicates the signal displayed by the PROV715/PROV715S/ PROV715P to an additional monitor or video display. Please see your installer for more information. -16 DVD Basics To get the optimum use out of the DVD section, make sure you read this section completely. Regional Coding Both the DVD player and disc are coded by region. These regional codes must match in order for the disc to play. If the codes don’t match, the disc won’t play. This unit’s code is region 1. Other regional codes cannot be played in this unit. The unit will display “WRONG REGION.” Types of Discs your DVD will play • DVD discs – DVD discs which contain video. • Audio discs – Audio CDs contain musical or sound content only. • MP3 discs – A disc that contains audio files (for example, a CD-R with downloaded MP3 files). • VCD discs –VCD discs which contain video. Loading and Playing Discs Before you load a disc, make sure that it is compatible with the player. Note: the following Discs CANNOT be used with this player : • MiniDisc •...
Otros modelos de este manual:reproductores de CD - PROV715 (416.49 kb)
reproductores de CD - PROV715S (416.49 kb)