Votos - 1, Puntuación media: 5
(
)
)
|
Resumen del manual
Resetting the CUE Point Repeat the procedure described on page 12 in “Setting the CUE Point,” starting from step 1. If the CD player is kept in the paused state for an extended Period of time If the CD player is left in the paused state for an extended period of time without performing any operations, it automatically enters the “auto standby” state. In the auto standby state, the disc stops and “Standby” is indicated on the display. To release the CD player from the auto standby state, press the button !7 . When you press the button !7 , the CD player searches for the position that it was at previously and then pauses. If you press the CUE button !5 while the CD player is in the auto standby state, it searches for the CUE point and then pauses there. Tip: The amount of time the unit waits before if enters the “auto standby” state can be selected in the preset menu: 30 minutes (initial value), 20 minutes, 10 minutes, or 30 seconds. ENGLISH 13 ENGLISH Playback Modes Setting the Playback Mode Procedure 1. Press the MODE button @2. The /ENTER button !7 lights. One of the playback modes and the current setting appear on the display E. Tip: For the items that can be set in playback mode, refer to the Playback Mode Chart. 2. Press the MODE button @2 in order to scroll through the playback modes. Tip: It is also possible to scroll through the items in the playback mode menu by pressing the INDEX+ button @4 or the INDEX– button @1. 3. Use the button !2or the button !4to change the setting of the displayed mode. At this point, the /ENTER button !7 changes from being steadily lit to flashing . ENTER ENTER 4. Press the /ENTER button !7 to confirm the change. At this point, the /ENTER button !7 changes from being flashing to steadily lit. Tip: Press the CUE/CLEAR button !5 to cancel a change before it is confirmed. ENTER ENTER 5. Press the /EXIT button !3 to exit the setting menu and return to the stopped state. Playback Mode Chart Functions, LCD Display, and Initial Values NO. Function Playback mode (LCD display) Setting items Initial value(bold) 1 Selects the operation when playback of a single track ends. Single: Off Cue Stop On 2 Selects whether to use program playback or not. Program: Off On 3 Selects whether to use random playback or not. Random: Off On 4 Selects whether to repeat playback or not. Repeat: Off 1 All Single track repeat All track repeat Tips: -This CD player is equipped with a “power-on auto repeat play back” function. The “power-on auto repeat playback” function begins playing automatically if the CD player is turned on while there is a CD in the disc tray. In order to use the “power-on auto repeat playback” function, you must make the following two settings beforehand: 1) Select “Single:Off” for play back mode function No.1. 2) Select “Repeat:All” for playback mode function No.4. 3) Select “Auto Cue:Off” for preset function No.1. 4) Select “Start:Play” for preset function No.13. -The playback mode that is currently set is stored in memory, and becomes the initial setting the next time that the power is turned on. If there is a disc in the tray, playback begins automatically in “all track repeat” mode when the power is turned on. Note: If you have set “Yes” for “Reset?” in the preset menu, the initial value for the playback mode is also restored. Checking the Playback Mode Procedure Pressing the MODE button @2 causes the various playback modes to be displayed on the screen. Tip: The following playback modes can be selected in combination: single-track playback (“Single”), program playback (“Program”), random playback (“Random”) and repeat playback (“Repeat”). 14 15 DANSK SVENSKA NEDERLANDS ITALINO DEUTSCH PORTUGUES ESPANOL FRANCAIS ENGLISH ENGLISH FRANCAIS ESPANOL PORTUGUES DEUTSCH ITALINO NEDERLANDS SVENSKA DANSK Command Cord Mode 2036-10 Preset 2041-12 END monitor 2043-10 CD-TEXT 2088 0 2000 1 2001 2 2002 3 2003 4 2004 5 2005 6 2006 7 2007 8 2008 9 2009 CD Sync start 1856 CD Sync stop 1857 - This CD player can be controlled through its infrared sensor @9 on the front panel when it receives remote control signals that supports RC5 signals as shown in the table at right. These remote control codes can also be used if sent through the RC5 remote control jack b found on the rear panel of the CD player. Tip: Because the infrared remote sensor @9 on the front panel of the CD player and the RC5 remote control input jack on the rear panel of the CD player both support the RC5 codes listed in the table at right, this CD player can be controlled through the infrared remote control sensor of any device that supports RC5 codes. * Remote control codes that are marked with an asterisk are not supported by the PMD330. Synchro Recording Using a Remote Control (Not Included) The figure depicts the PMD331/PMD340. Infrared remote control transmitter Approximately 5 meters (15 feet) Using Synchro Recording This CD player has a CD SYNC function that makes it easy to record for this CD player to be used in combinatio...
Otros modelos de este manual:reproductores de CD - PMD330 (776.08 kb)
reproductores de CD - PMD331 (776.08 kb)