Votos - 5, Puntuación media: 3.6
(
)
)
|
Resumen del manual
standard (Initial Setting) While pressing the BND button 02], press the SRCH Right button 21, then the “U.S. standard” will be selected. 12 QRB4675/DRB36 75/RDB465D/RDB365D CD Mode Operations_ Loading a Disc Insert the disc into the CD insertion slot with its label side up, then the CD will start playing. For 5-inch (12 cm) CD For 3-inch (8 cm) single CD • When inserting a single CD (3 "(8 cm)), insert it from the center of the slot. *When inserting a single CD (3 "(8 cm)), do not connect an adapter. T „ n I I u IjjjjjjJ • Press the DISP button H], then the display will show the play time. Notes: • Some CDs recorded in CD-R mode may not be usable. • Even when recorded in CD-R/W mode, some CDs may not be usable. Listening to the Disc already Inserted Press the FNC button [3] to select the CD mode, the CD will start playing. Stopping (pausing) Playback Press the Play/Pause button 05]. Press the Play/Pause button 0H again to resume playback. Ejecting the CD Press the Eject button [4], then the CD will be ejected. Note: • If the ejected CD is left as it is, it will be reloaded after 15 seconds. However, single CDs will not be reloaded, so make sure to remove them. Top Function Press the TOP button 02], then the CD will start playing from the first song (track number 1). Selecting Tracks (songs) Press the SRCH Left/Right button 51. ►>: Playback will start from the next track. «: Playback will start from the beginning of the track currently playing. When this button is pressed again, the CD will play from the previous track. Fast-Forward and Fast-Backward Press and hold the SRCH Left/Right button IH. : To fast-forward «: To fast-backward * Pressing the SRCH Left/Right button for 1 second or longer will move forward or backward 5 times faster than normal play, and pressing it for 3 seconds or longer will do the operation 30 times faster. Scan Play (Intro Music Scan) Press the SCN button ®, then the display shows “SCN”, then the CD will play the first 10 seconds of each track of the whole disc. Press the SCN button @ again to disengage the unit from scan play. * A scan play will start from the track following the one currently playing. Repeat Play Press the RPT button @], then the display shows “RPT”, then the track currently playing will be played repeatedly. Press the RPT button ® again to disengage the unit from repeat play. Random Play Press the RDM button 0, then the display will show “RDM”, then the entire tracks on the disc will be played at random. Press the RDM button [f] again to disengage the unit from random play. DRB4675/DRB3675/RDB465D/RDB365D 13 9. TROUBLESHOOTING Problem Cause Solution Power does not turn on. (No sound is produced.) Fuse is blown. Replace with a fuse of the same amperage. If the fuse blows again, consult your store of purchase. Incorrect wiring. Consult your store of purchase. Compact disc cannot be loaded. Another compact disc is already loaded. Eject the compact disc before loading the new one. Sound skips or is noisy. Compact disc is dirty. Clean the compact disc with a soft cloth. Compact disc is heaviiy scratched or warped. Replace with a compact disc with no scratches. Sound is bad directly after power is turned on. Water droplets may form on the internal lens when the car is parked in a humid place. Let dry for about 1 hour with the power on. Nothing happens when buttons are pressed. Display is not accurate. Microprocessor has malfunctioned due to noise, etc. Turn off the power, then press the DCP Release button Q] and remove the DCP. Press the reset button for about 2 seconds with a thin rod. — Reset button DCP or source unit connectors are dirty. Wipe the dirt off with a soft cloth moistened with cleaning alcohol. 14 DRB4S75/DRB3675/RDB465D/R0B3650 10. ERROR DISPLAYS ■ To protect the system, this unit has been equipped with self diagnostic functions. If a fault arises, a warning is issued by various error displays. Follow the corrective measures and remove the fault. Error Display Corrective Measure r "1 c r c This error display indicates that a fault has arisen in the mechanism of the source unit (for example, the disc cannot be ejected). -* Check the source unit. r ~l C r 3 This error display indicates that the pickup focus is off because of a scratched disc or some other factor during source unit play. -> Check the compact disc. r C r Ü This indicates that the CD’s TOC (table of contents) cannot be read, for example because the selected disc is upside-down. DRB4675/DRB3675/RDB465D/RDB365D 15 11. SPECIFICATIONS FM Tuner Frequency Range: 87.9 MHz to 107.9 MHz Usable Sensitivity: 11 dBf 50 dB Quieting Sensitivity: 17 dBf Alternate Channel Selectivity: 75 dB Stereo Separation (1 kHz): 35 dB Frequency Response (±3 dB): 30 Hz to 15 kHz AM Tuner Frequency Range: 530 kHz to 1,710 kHz Usable Sensitivity: 25 /vV CD Player System: Compact disc audio system Usable Discs: Compact disc Frequenc...
Otros modelos de este manual:reproductores de CD - DRB3657 (547.38 kb)
reproductores de CD - DRB465D (547.38 kb)