Votos - 3, Puntuación media: 3.7 ( )

Fabricar: Kenwood Tamaño del archivo: 617.67 kb Nombre del archivo: Idioma del manual:

Hereafter the illustration of the common parts on the front panel is of CD-206/DPF-R6010. : Keys and controls used in the operations described on this page. Loading/unloading discs 1 1 Load/unload a disc. Close the tray. Label side Disc tray 2Place/remove a disc. 3When loading or unloading other discs 0DISC SKIP 1Open the tray. 2 0 ODo not touch the played side of disc. OLoading two discs together will cause malfunctioning. OPlace the disc properly along the groove on the tray. (If the disc is not placed horizontally, malfunction will result.) OA single CD (8 cm disc) can also be played. OOrdinary CD single (8 cm) disc adapters sold in audio stores cannot be used with this unit. OWhen loading/unloading a disc while the tray rotates, a malfunction might occur. Load/unload the disc when the tray does not rotate. CD-206/DPF-R6010 DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 All DISC indicators " " light regardless of how many discs are present. CD-204/203/DPF-R4010/R3010 12345 DISC SINGLE TRACK NO. 6 7 8 910 101 000 : 54321 All DISC indicators " " light regardless of how many discs are present. ALL TEXT SEARCH (CD-206/DPF-R6010 only) Remote control unit only For most CD-TEXT discs, it is convenient to read the complete disc information into the CD player before playing the disc. This allows text information such as TITLE SEARCH, TEXT DISPLAY, ALL INFO., and other messages to be displayed faster. Search in progress or reading information Blinks. D IS C R C. E A D ING D 1 : CD T E XT When the disc is CD-TEXT ORepeat the above procedure so that the complete disc information is read into the CD player. OIn the case of a non-CD-TEXT disc, the ”D1 : NO CD TEXT“ display will appear for approx. 3 seconds. OThe information read into the CD player is cleared when the tray is opened. Therefore, perform this operation again if the tray was opened. After loading all the discs, operate in stop mode. REMOTE CONTROL UNIT RC-P0601 ALL TEXT SEARCH Normal play (TRACK mode) Use the following procedure to play a CD in the original order of tracks from track No. 1. CD-206/204/203/DPF-R6010/R4010/R3010 (En) Hereafter the illustration of the common parts on the front panel is of CD-206/DPF-R6010. REMOTE CONTROL UNIT RC-P0601 : Keys and controls used in the operations described on this page. Playing tracks in order from track No. 1 1 1 Check that the unit is in the normal play TRACK mode. ! 2 2 Start playback. CD-206/DPF-R6010 If there is no disc in the selected disc tray, the corresponding indicator " " goes off. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 Blinks during playback. CD-204/203/DPF-R4010/R3010 If there is no disc in the selected disc tray, the corresponding indicator " " goes off. SINGLE 109876 54321 TRACK NO. DISC 54321 01218:1 OPlayback starts from the disc selected in order of the DISC No. OWhen the 3/8key is pressed without selecting a disc, playback starts from the indicated DISC No. CD-206/DPF-R6010 Lights up. Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP or 10:132 Track NO. being Elapsed time of track being played played OIn the case of a CD-TEXT disc, the disc’s title is scrolled on the display. What is then displayed is in accordance with the TEXT DISPLAY mode. # CD-204/203/DPF-R4010/R3010 SINGLE 109876 54321 TRACK NO. DISC 54321 01218:1Track NO. being played Elapsed time of track being played Disc indicator during Playback (°) To pause playback To stop playback Lights up. 1067CD-206/DPF-R6010 CD-204/203/DPF-R4010/R3010 54321 8 OEach press pauses and plays the CD alternately. Normal play (TRACK mode) CD-206/204/203/DPF-R6010/R4010/R3010 (En) Playback from desired track 2Select the desired track No. 1Select the disc. DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 4. 1 2 3 4 5 6 7 8 9 0 +10 Main unit Remote control unit Press the numeric keys as shown below.... To enter track No. 23 : 003 To enter track No. 40 : 0000) OPlayback starts from the selected track and continues on the subsequent tracks. Skipping tracks To skip forward To skip backward 4. OThe track in the direction of the pressed key is skipped, and the selected track will be played from the beginning. OWhen the 4key is pressed once during playback, the track being played will be played from the beginning. Searching Forward search Backward search 1A OPlayback starts from the position where the key is released. What is the “normal play TRACK mode”? The normal play TRACK mode refers to the state in which the PGM, EDIT and RANDOM mode displays are off. To set the unit to the TRACK mode: Press the P.MODE key when the ”PGM“ or ”EDIT“ display is lighted. Press the RANDOM key when the ”RNDM“ display is lighted. P.MODE RANDOM RANDOM GP0M1DETINRMDPGM 54321 EDIT 5432154321 Goes off. Goes off.Goes off. Goes off. Goes off.Goes off. CD-206/DPF-R6010 CD-204/203/DPF-R4010/R3010 Searching for tracks by title (TITLE SEARCH) (CD-206/DPF-R6010 only) CD-206/204/203/DPF-R6010/R4010/R3010 (En) 12 In the case of a CD-TEXT disc, the tracks to be heard can be searched by title. OLoad a disc (...

Descargar ahora

Introduzca dos números de la imagen: