Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
The storage compartment has a latch to keep your remote control in place, and is located inside the CD compartment. (SeeB) Placing your set To avoid possible staining of surfaces, please do not stand this set in vertical position over a long period. The type plate is located on the bottom of the set. BASIC FUNCTIONS Switching on and off and selecting function 1. Press POWER on the set (or y on remote control) to switch on. 2. Press CD•FM•AM once or more to select : CD / Tuner function, and operate the respective function controls. 3. Press POWER to switch off the set. Note : The DBB setting, radio band preset and the volume level (maximum to 20) will be retained in the set's memory. Adjusting volume and sound (See 2) 1. Adjust the volume with the VOLUME +, - controls. . Display shows the volume level in number from 0-32. 2. Press DBB once or more to select dynamic bass boost on or off. . Display: shows when activated. English CONTROL POWER SUPPLY BASIC FUNCTIONS DIGITAL TUNER Tuning to radio stations 1. Press POWER to on, then press CD•FM•AM (or TUNER on remote control) to select TUNER. . TU is displayed briefly and then the radio station frequency, waveband and, if programmed, a preset number are shown (See3) 2. Press CD•FM•AM ( or BAND on remote control) once or more to select your waveband. 3. Press and hold SEARCH °or ¤ until the frequency in the display starts running. . The radio automatically tunes to a station of sufficient reception. Display shows Srch during automatic tuning. 4. Repeat step 2 if necessary until you find the desired station. • To tune to a weak station, press °or ¤briefly and repeatedly until you have found optimal reception. To improve radio reception: • For FM, extend, incline and turn the telescopic antenna. Reduce its length if the signal is too strong. • For AM , the set uses a built-in antenna. Direct this antenna by turning the whole set. Programming radio stations You can store up to a total of 30 radio stations (20 FM and 10 AM) in the memory, manually or automatically (Autostore). Manual programming 1. Tune to your desired station (see Tuning to radio stations). 2. Press PROGRAM to activate programming. . PROGRAM flashes. 3. Press TUNER PRESET 4,3once or more to select a preset number. • Remote control : Press PRESET 3, 4once or more to select a preset station. 4. Press PROGRAM to confirm. 5. Repeat steps 1-4 to store other stations. Note : You can erase a preset station by storing another frequency in its place. Autostore Autostore automatically starts programming radio stations from preset 1. Available stations are programmed in order if the station with sufficient reception strength. Any previous presets e.g. manually programmed will be erased. • Press PROGRAM for 2 seconds or more to activate autostore programming. . The display shows AUtO, PROGRAM blinks, followed by the radio station details when stored. After all stations are stored, the first preset station will then automatically play. To listen to a preset station • Press the TUNER PRESET 4,3buttons once or more until the desired preset station is displayed. • Remote control : optionally, press PRESET 3, 4to select your preset station. Playing a CD This CD player plays Audio Discs including CDRecordables and CD-Rewritables. 1. Adjust the CD•FM•AM to CD (or CD on remote control) 2. Open the CD Door. . OPEN is displayed. 3. Insert a CD with the printed side facing up and close the door. . nocd if no CD inserted/ CD dirty, incorrectly inserted or damaged. . nFcd if you have inserted a non-finalized CDR( W). 4. Press 2; to start playback. . dAtA if your CD contains non-audio i.e. data files. 5. To pause playback press 2;. Press 2; again to resume play. . Display: Bflashes during pause. 6. To stop CD playback, press the 9 button. Note : CD play will also stop when: - the CD door is opened - the CD has reached the end - you select FM / AM function. Selecting a different track • Press SEARCH °or ¤once or repeatedly to select your track. • In the pause / stop position, press 2; to start playback. Finding a passage within a track 1. Press and hold SEARCH °or ¤. – The CD is played at high speed and low volume. 2. When you recognize the passage you want, release °or ¤ to resume normal playback. Different play modes: SHUFFLE and REPEAT You can select and change the various play modes before or during playback, and combine the modes with PROGRAM. (See 4) SHUFFLE - tracks of the entire CD/ program are played in random order SHUFFLE REPEAT ALL - to repeat the entire CD/ program continuously in random order REPEAT ALL - repeats the entire CD/ program REPEAT - plays the current track continuously 1. To select play mode, press MODE once or more. 2. Press 2; to start playback if in the stop position. 3. To select normal playback, press MODE repeatedly until the various modes are no longer displayed. – You can also press the 9 button to cancel your play mode. DIGITAL TUNER DIGITAL TUNER CD PLAYER CD PLAYER Programming track numbers...
Otros modelos de este manual:reproductores de CD - AZ3300/37 (3.35 mb)