Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
2 AUX — 3.5 mm LINE-IN jack for external audio appliance 3 STANDBYy — power on/ off switch 4 Source selector — selects CD/ TUNER/ AUX/ TAPE function 5 IR Sensor — infrared sensor for remote control 6 Cassette recorder keys RECORD 0 — starts recording PLAY 1 — starts playback SEARCH 5/ 6 — fast winds/rewinds tape STOP/OPEN 9/ — opens the cassette compartment — stops the tape PAUSE ; — pauses playback or recording 7 OPEN•CLOSE - press to open/close CD door 8 DBB selector — Switches the bass enhancement on / off 9 VOLUME — adjusts volume level 0 Band selector— selects wavebands ! Navigation controls PRESET - , + — selects a preset tuner station (down, up) 9 — stops CD playback; — erases a CD programme SEARCH . , § — CD: — searches back and forward within a track; — skips to the beginning of a current track/ previous/ later track Tuner: tunes to radio stations (down, up) . MODE — selects different play modes: e.g. REPEAT or SHUFFLE (random) order 2; — starts or pauses CD playback @ PROGRAM — CD: programmes tracks and reviews the programme; Tuner: programmes preset radio stations # Display — shows the status of the set CONTROLS BACK PANEL $ Telescopic aerial — improves FM reception % AC MAINS — inlet for mains lead ^ Battery compartment — for 6 batteries, type R-20, UM1 or D-cells REMOTE CONTROL 1 VOLUME + , – — adjusts volume level (up, down) 2 SHUFFLE — plays all CD tracks in random order 3 2; — starts/ pauses CD playback 4 SEARCH 5, 6 — searches backwards/ forwards within a track 5 PRESET 3,4 – — selects a preset radio station (up, down) 6 TUNING . , § — tunes to tuner stations (down, up) 7 9 — stops CD playback; — erases a CD programme 8 . , ™ — skips to the beginning of a current track previous/ subsequent track 9 REPEAT — repeats a track /programme/ entire CD CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. IMPORTANT! For users in the U.K.: please follow the instructions on the upper righthand-side. BASIC FUNCTIONS MAINS SUPPLY Whenever convenient, use the mains battery life. Make sure you remove plug from the set and wall socket before inserting batteries. Batteries (not included) . Insert 6 batteries, type R-20, UM-1 or D-cells, (preferably alkaline) with the correct polarity. Remote control (See A) . Insert 2 batteries, type AAA, R03 or UM4 (preferably alkaline). Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst. . Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set. • When inserting new batteries, do not try to mix old batteries with the new ones. . Batteries contain chemical substances, so they should be disposed of properly. Using AC Mains 1 Check if the mains supply, as shown on the type plate located on the bottom of the set, corresponds to your local mains supply. If it does not, consult your dealer or service centre. 2 If your set is equipped with a voltage selector, adjust the selector so that it matches with the local mains. 3 Connect the mains lead to the wall socket. 4 To disconnect the mains supply, unplug the set from the wall socket. Auto-Standby mode When a CD has reached the end of playback and remains in the stop position for more than 15 minutes, the set will switch off automatically to save mains. When in pause position for 5 minutes, the CD playback will stop automatically. 15 minutes later, the set switches off. The type plate is located on set. BASIC FUNCTIONS Switching on and off and selecting function 1 Press STANDBY y on the set to switch on. 2 Press Source selector once or more to select: CD, TUNER, AUX or TAPE function. 3 Press y to switch off the set. Helpful hints: – To change from TAPE to CD, TUNER or AUX function, or when you are switching off the set: first, make sure you press the tape STOP 9 key to end playback and all the cassette keys are released. – The tone, sound settings, tuner presets and the volume level (up to a maximum volume level of 20) will be retained in the set’s memory. Volume adjustment . Adjust the volume with the VOLUME control. ™ Display shows the volume level and a number from 0-32. (See 2) Bass adjustment There are three DBB (Dynamic Bass Boost) options: — Off: no bass enhancement — DBB1: moderate bass enhancement — DBB2: strong bass enhancement . Press DBB Selector once or more to select your option. ™ DBB1,2 appears if DBB is activated. DIGITAL TUNER DIGITAL TUNER Tuning to radio stations 1 Press y to on, then press Source selector to select TUNER. — is displayed briefly and then the radio station frequency, waveband and, if programmed, a preset number are shown. (See 3) 2 Press Band selector once or more to select your waveband. 3 Press and hold . or § until the frequency in the display starts running. ™ The radio automatically tunes to a station of suf ficient reception. Display shows during automatic tuning. 4 Repe...
Otros modelos de este manual:reproductores de CD - AZ2060/14 (976.94 kb)