Votos - , Puntuación media:
(
)
)
Fabricar: Philips
Tamaño del archivo: 691.91 kb
Nombre del archivo:
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
or § to resume normal playback. Different play modes: SHUFFLE and REPEAT (See 4, 5) You can select and change the various play modes before or during playback, and combine REP ALL and REP with PROG. SHUF – tracks of the entire CD are played in ran dom order REP ALL – repeats the entire CD/program REP – plays the current track continuously For MP3 only: REP ALB – all tracks of current album play repeatedly. 1 To select play mode, press MODE ( SHUFFLE or REPEAT on the remote control) once or more. 2 Press 2; to start playback if in the stop position. 3 To select normal playback, press MODE repeatedly until the various modes are no longer displayed. – You can also press 9 to cancel your play mode. Helpful hints: In shuffle mode, press . ( . on the remote control) to go to the beginning of current track CD/MP3 PLAYER Programming track numbers You may store up to 20 tracks (for in the desired sequence. If you like, more than once. 1 In the stop position, press . or § (on the remote control . or ™ ) to select your desired track num ber. For MP3-CD: first press ALBUM/ PRESET - , + (on the remote control 3,4) once or more to find your album. 2 Press PROG. . Display first shows the number of program location and then, track/album number stored here. (See 6, 7) • If you attempt to program without first selecting a track number, is shown. 3 Repeat steps 1-2 to select and store all desired tracks. • Display: if you try to program more than 20 tracks (for MP3-CD: 10 tracks). Helpful hints: – When the PROG or SHUF mode is active, use of the - , + keys (or 3,4 on the remote control) are void. Reviewing the programme In the stop position, press PROG repeatedly to see your stored track numbers. . Display first shows the number of program location and then, track/album number stored here. Erasing a programme You can erase the contents of the memory by: • opening the CD door; • selecting MW, FM or TAPE sound sources; •pressing 9 twice during playback or once in the stop position. ™ PROG disappears. CASSETTE RECORDER CASSETTE RECORDER Cassette playback 1 Push the source selector to TAPE.. 2 Insert a cassette and close the door. 3 Press PLAY 1 to start playback. Display: shows TAPE throughout tape operation. 4 To pause, press PAUSE ; . Press again to resume. 5 To stop the tape, press STOP/OPEN 9/ . Fast forwarding/rewinding 1 Press SEARCH 5 or 6 until you reach your desired passage. 2 Press 9/ to stop fast forwarding/rewinding. Helpful hints: – During playback, the keys are automatically release at the end of a tape, and the set is switched off (except if ; has been activated). – During fast winding/rewinding, the keys will not be released at the end of a tape. To switch off the set, make sure the cassette keys are also released. GENERAL INFORMATION ON RECORDING • Recording is permissible insofar as copyright or. other rights of third parties are not infringed. • For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. • The best recording level is set automatically. Altering the VOL or DBB controls will not affect the recording. •To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape. CASSETTE RECORDER CD Synchro Start recording 1 Select CD/MP3 function. 2 Insert a CD and if desired, programme 3 Open the cassette door. 4 Insert a suitable tape into the cassette deck and close the door. 5 Press RECORD 0 to start recording. ™ Playing of the CD/program starts automatically from the beginning. You don’t need to start the CD player separately. ™ Display: shows briefly. 6 To pause recording, press PAUSE ; . Press PAUSE ; again to resume recording. 7 To stop recording, press STOP/OPEN 9/ . Recording from the Radio 1 Tune to the desired radio station (see Tuning to radio stations). 2 Follow steps 3-7, under CD Synchro Start recording. Maintenance & Safety (See 8, 9) CD player and CD handling • If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair. • The lens of the CD player should never be touched! • Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates. • Always close the CD door to avoid dust on the lens. •To clean the CD, wipe in a straight line from the centre towards the edge using a soft, lint-free cloth. Do not use cleaning agents as they may damage the disc. • Never write on a CD or attach any stickers to it. MAINTENANCE Safety Information • Place the set on a hard, flat and stable that the system does not tilt. • Do not expose the set, batteries, CDs to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight. • The apparatus shall not be expos...