Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Supplied Accessories – AC power cord Top/front panels (See 1) 1 VOLUME – adjusts volume level. 2 Source selector: CD,TUNER,TAPE/OFF – selects CD, radio or tape source of sound – power off switch 3 CASSETTE RECORDER keys: PAUSE– pauses playback or recording STOP•OPEN – stops the tape or recording; – opens the cassette holder. F.FWD / REW – fast winds/ rewinds tape; PLAY – star ts playback; REC – star ts recording. 4 Display – shows the CD functions 5 2 ; - star ts or pauses CD playback 22 / 11 – selects the next/previous track – searches forwards/backwards (press and hold the button) within the current track REPEAT – repeats a track/ CD program/entire CD. 6 PROG – programs tracks and reviews the program 7 LIFT TO OPEN – opens/ closes the CD door. 8 TUNING – tunes to radio stations 9 SHUFFLE – plays all tracks in random order 0 BAND – selects waveband (FM or MW). ! 9 STOP – stops CD playback;; – erases a CD program Controls/Power Supply Back/bottom panels (See 2 and 3) @ Telescopic antenna - improves FM reception. # AC MAINS~ - inlet for power cord. $ DBB – turns the bass enhancement on/off. % p – 3.5 mm stereo headphone socket Helpful hints: The speakers will be muted when headphones are connected to the set. ^ Battery door - open to inser t 6 x 1.5V R-14/ UM-2/ C-cells CAUTION Use of controls or adjustments or performance of procedures other than herein may result in unsafe operation. This set complies with the radio interference requirements of the European Union. Power Supply Whenever convenient, use the power supply cord if you want to conser ve batter y life. Make sure you remove the plug from the set and wall outlet before inser ting batteries. Batteries (not included) 1 Open the batter y door and inser t 6 batteries, type R-14, UM-2 or C-cells, (preferably alkaline) with the correct polarity as indicated by the "+" and "–" symbols inside the compar tment. (See 2). 2 Replace the batter y door, making sure the batteries are firmly and correctly in place. The set is now ready to operate. Batteries contain chemical substances, so they should be disposed of properly. Power Supply General Operation/Tuner • Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst: • Do not mix batter y types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set. • When inserting new batteries, do not tr y to mix old batteries with the new ones. • Remove the batteries if the set is not to be used for a long time. Using AC power WARNING: Always check you have completely switched off the set, before you change or disconnect power supply. 1 Check if the power voltage, as shown on the type plate located on the bottom of the set, corresponds to your local power supply. If it does not, consult your dealer or ser vice center. 2 Connect the power cord to the AC MAINS~ inlet and the wall socket. The set is now connected and ready for use. 3 To switch the set off completely, withdraw the power cord from the wall socket. 4 Install the unit near the AC outlet and where the AC power plug can be easily reached. • Disconnect the power cord from the wall socket to protect your set during heavy thunderstorms. The type plate is located on the bottom of the set. Helpful hints: – To avoid unnecessar y energy consumption, always adjust the Source selector to TAPE/ OFF after using the set. Also check that the tape deck keys are released. General operation Switching on and off and selecting the function 1 To select your sound source, adjust the Source selector to: CD, TUNER or TAPE/ OFF. 2 To switch off the set, adjust the Source selector to TAPE/ OFF position and check the cassette keys are released. Adjusting volume and sound Adjust the sound with the VOLUME and DBB controls. Radio reception 1 Adjust the Source selector to TUNER. 2 Adjust BAND to select your desired waveband, MW, or FM. 3 Turn TUNING to tune to a station. Helpful hints: To improve radio reception • For FM, extend, incline and turn the telescopic antenna for best reception. Reduce its length if the signal is too strong. • For MW, the set uses a built-in antenna. Direct this antenna for best reception by turning the whole set. CD Player Playing a CD • This CD player plays Audio Discs including CD-Recordables (CD-R) and CD-Rewritables (CD-RW). • MP3, CD-ROM, CD-I, CDV,VCD, DVD or computer CDs are not possible for playback. IMPORTANT! CDs encoded with copyright protection technologies by some record companies may be unplayable by this product. 1 Adjust the Source selector to CD. 2 Open the CD door, and insert a CD with the printed side facing up, then press the CD door gently to close. . Display shows --, and later the total number of tracks. (See 3) 3 Press 2/; to start playback. 4 To pause playback, press 2/;. . Display: 2 flashes. (See 4) 5 To resume, press 2/; again. 6 To stop CD playback, press 9. Helpful hints: CD play will also stop when: – you open the CD door; – you select TUNER or TA...