Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
If you wish to discard these items, please contact your local authorities or dealer and ask for the correct method of disposal. Note for the battery symbol This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement set by the Directive for the chemical involved. Environmental information All redundant packing material has been omitted. We have done our utmost to make the packaging easily separable into mono materials. Please obser ve the local regulations regarding the disposal of packing materials. 2 Your CD Soundmachine Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at com/welcome. Introduction With the CD Soundmachine you can play audio discs and listen to FM/MW radio.You can also program the play sequence of tracks. Dynamic Bass Boost (DBB) helps you to maximizes music enjoyment. What’s in the box Check and identify the contents of the package: • CD Soundmachine • AC power cord • User Manual Overview of the Soundmachine (see 1) a VOLUME • Adjust volume level b DBB • Turn the bass enhancement on/off c Cassette recorder buttons • Pause play or record • Stop cassette play or record Open the cassette holder • Fast forward/rewind cassette • Star t cassette play • Star t cassette record d Display e CD Buttons • Stop CD play Erase a CD program • Star t or pause CD play • Select the previous/next track Fast search backward/forward within the current track f PROG • Program tracks and browse the program g LIFT TO OPEN • Open/Close the CD compar tment h MODE • Select a play mode: REPEAT or SHUFFLE i BAND • Select a wave band j LINE-IN • Socket for audio input k TUNING +/- • Tune to radio stations / / l Telescopic antenna • Improve FM reception m AC MAINS~ • Socket for the power cord n Battery door o Source selector: CD, TUNER , LINE-IN , TAPE/OFF • Select sound source • Switch to standby mode 3 Get started Caution • Use the controls only as stated in this user manual. Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial numbers. Find the model number and serial number of this soundmachine at the back or the bottom of your soundmachine. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Install batteries 1 Open the batter y compar tment. (see 2) 2 Inser t 6 x 1.5V R14/UM-2/C-cell batteries with correct polarity (+/-) as indicated. 3 Close the batter y compar tment. Tip • If you want to save batter y life, use the supplied power cord. Connect AC power Warning • Risk of product damage! Ensure that the power suppl y voltage corresponds to the voltage printed on the back or the underside of the Soundmachine. • Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. Note • Install the unit near the power supply socket and where the AC power plug can be easily reached. (see 3) 1 Connect the power cord to the AC MAINS~ socket on the Soundmachine and to the power supply socket. • To switch the Soundmachine off completely, disconnect the power cord from the power supply socket. Tip • To save energy: After use, set the source selector to TAPE/OFF. 4 Use your Soundmachine Play a CD Note • You cannot play CDs encoded with copyright protection technologies. You can play commercially available audio: • CDs • CD-Recordables (CD-R) • CD-Rewritables (CD-RW) 1 Switch the source selector to CD. 2 Lift the lid of the CD compar tment. 3 Inser t a CD with the printed side facing up. 4 Close the CD lid gently. » The total number of tracks is displayed. 5 Press to star t play. » [ ] is displayed. (see 4) • To pause CD play, press . • To resume CD play, press again. • To stop CD play, press . Select a track 1 During play, press to select a track. / Find a passage within a track 1 During play, press and hold » The CD is played at high speed and with reduced volume. 2 Release to resume normal play. Tip • When search reaches the end of the last track, the CD stops. Program play sequence You can store up to 20 tracks in the desired sequence. 1 In stop mode, press PROG to star t to program play sequence. » [PROG] and [00] are displayed. (see 5) 2 3 4 Repeat steps 2 to 3 to select and store all tracks. » When all 20 tracks are stored, no more tracks can be selected and the display shows [---]. 5 To play program, press . • In stop mode, press PROG repeatedly to browse stored tracks. • To cancel program, press twice. Tip • When program play stops, the Soundmachine returns to normal play. To play program again, repeat steps 1 to 5. / . / Press / to select a track. Press PROG to store the track. Select play modes Repeat play You can repeat a track, a disc, or a program. • [ ] – plays the current track continuously • [ ALL] – repeats the entire CD/program 1 During play, press MODE repeatedly until the display shows the r...