Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Please observe the local regulations regarding the disposal of packaging, exhausted batteries and old equipment. English CONTROL POWER BASIC SUPPLIED ACCESSORIES – AC mains lead – Remote control TOP AND FRONT PANELS (See 1) 1 p – 3.5 mm stereo headphone socket Helpful hints: The speakers will be muted when headphones are connected to the set. 2 AUX – 3.5 mm line-injack for external audio appliance 3 STANDBYy – power on/ off switch 4 Source selector – selects CD(MP3-CD)/ TUNER/ AUX/ TAPE function 5 IR Sensor – infrared sensor for remote control 6 Cassette recorder keys RECORD 0 – starts recording PLAY 1 – starts playback SEARCH 5/ 6 – fast winds/rewinds tape STOP• OPEN 9/ – opens the cassette compartment – stops the tape PAUSE ; – pauses playback or recording 7 OPEN•CLOSE -press to open/close CD door 8 DBB – switches the bass enhancement on (DBB1 or DBB2) / off 9 VOLUME – adjusts volume level 0 FM•MW TUNER: selects wavebands MP3: display MP3-CD information ! Navigation controls PRESET (ALB/ PRE) -, + (down, up) – MP3 only : selects previous / next album. TUNER : selects a preset station. 9 – stops CD playback; – erases a CD programme SEARCH . , § – CD/MP3: – searches backwards and forwards within a track; – skips to the beginning of a current/ previous/ later track TUNER: tunes to radio stations (down, up) . MODE – selects different play modes: e.g. REPEAT or SHUFFLE (random order) 2; – starts or pauses disc playback @ PROGRAM CD/MP3: programs tracks and program; Tuner: programs preset radio stations # Display – shows the status of the set BACK PANEL $ Telescopic aerial – improves FM reception % AC MAINS – inlet for mains lead ^ Battery compartment – for 6 batteries, type R-20, UM1 or D-cells REMOTE CONTROL (See 1) 1 CD – switches the set on and selects CD/MP3 sound source 2 y – switches the set to standby / on if AC powered power. (Switches set off if battery powered) 3 VOLUME +, - (up, down) – adjusts volume level 4 SHUFFLE – selects shuffle modes 5 DBB – switches the bass enhancement on (DBB1or DBB2)/ off 6 2; – starts/ pauses disc playback 7 SEARCH 5, 6 – searches backwards/ forwards within a disc track 8 BAND – selects wavebands 9 PRESET (ALB/ PRE) 3,4 – MP3 only : select next/ previous album. TUNER : select a preset station. 0 TUNING -, + – tunes to tuner stations ! TUNER – switches the set on and selects tuner source @ 9 – stops disc playback; – erases a disc program # . , ™ – skips to the beginning of a current/ previous/ subsequent disc track $ MUTE – interrupts/ resumes sound % REPEAT – select repeat modes CAUTION Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation. MAINS SUPPLY Whenever convenient, conserve battery life. Make power plug from the set and wall batteries. Batteries (not included) • Insert 6 batteries, type R-20, UM-1 or D-cells, (preferably alkaline) with the correct polarity. (See A) Remote control • Insert 2 batteries, type AAA, R03 or UM4 (preferably alkaline). (See A) Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst. • Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set. • When inserting new batteries, do not try to mix old batteries with the new ones. • Batteries contain chemical substances, so they should be disposed of properly. Using AC Mains 1 Check if the mains supply, as shown on the type plate located on the bottom of the set, corresponds to your local mains supply. If it does not, consult your dealer or service centre. 2 If your set is equipped with a voltage selector, adjust the selector so that it matches with the local mains. 3 Connect the mains lead to the wall socket. 4 To disconnect the mains supply, unplug the set from the wall socket. Auto-Standby mode When a CD has reached the end of playback and remains in the stop position for more than 15 minutes, the set will switch off automatically to save mains. The type plate is located on the bottom of the set. BASIC FUNCTIONS Switching on and off 1 Press STANDBY y to switch on. 2 Press Source selector once or more to select: CD (MP3-CD) , TUNER, AUX or TAPE function. 3 Press y to switch off the set. Helpful hints: –To change from TAPE to CD, TUNER or AUX function, or when you are switching off the set: first, make sure you press the tape STOP 9 key to end playback and all the cassette keys are released. – The tone, sound settings, tuner presets and the volume level (up to a maximum volume level of 20) will be retained in the set’s memory. ADJUSTING VOLUME AND SOUND • Adjust the volume with the VOLUME control. = Display shows the volume level and a number from 0-32. (See 2) Bass adjustment There are three DBB (Dynamic Bass Boost) options: – Off: no bass enhancement – DBB1: moderate bass enhancement – DBB2: strong bass enhancement • Press DBB once or more to select your option. ™ DBB1,2 appears if DBB i...