Votos - 3, Puntuación media: 4.7 ( )

Fabricar: Sony Tamaño del archivo: 205.86 kb Nombre del archivo: 4226518112.pdf Idioma del manual:

By inserting a pause during programming, you can divide the program into two for recording on both sides of a tape. DISC 1 - 5 H XlAMS L PROGRAM 1 Create your program (for side A when recording on a tape) while checking the total playing time indicated in the display. Follow Steps 1 to 5 in “Creating Your Own Program” on page 12. The A indication appears in the display. 2 When you record on both sides of the tape, press Xto insert a pause. The “P” and AB indications appear in the display and the playing time is reset to “0.00.” When you record on one side of the tape, skip this step and go to Step 4. A pause is counted as one step You can program up to 31 steps when you insert a pause. 3 Repeat Steps 2 to 5 in “Creating Your Own Program” on page 12 to create the program for side B. 4 Start recording on the deck and then press Hon the player. When you record on both sides of the tape, the player pauses at the end of the program for side A. 5 When you record on side B, reverse the tape and press Hor Xon the player to resume playing. z To check and change your program See page 13. The A indication appears while checking the program for side A and Bwhile checking the program for side B. Recording a CD by Specifying Tape Length (Time Edit) You can have the player create a program that will fit the length of the tape. The player automatically creates a program, keeping the original order of the disc. The program can contain up to 32 steps (a pause inserted between steps is counted as one step). Note that tracks numbered over 20 cannot be programmed automatically. EDIT/TIME FADE HXDISC SKIP m/M 1 Press DISC SKIP to select the disc. 2 Press EDIT/TIME FADE repeatedly before you start playing until “EDIT” appears and “A” in the A indication flashes in the display. 3 Press mor Mto specify the tape length. Each time you press these buttons, the display changes as shown below, with the tape length of one side following each indication. t C-46 y C-54 y C-60 y C-74 y C-90 y - -. - -T (23.00) (27.00) (30.00) (37.00) (45.00) 4 Press EDIT/TIME FADE to have the player create the program. The display shows the tracks to be recorded. “B” in the AB indication flashes in the display. 5 When you record on both sides of the tape, press EDIT/TIME FADE again. The player inserts a pause, then creates the program for side B. The display shows the programmed tracks. When you record on one side of the tape, skip this step. 6 Start recording on the deck and then press Hon the player. When you record on both sides of the tape, the player pauses at the end of the program for side A. Recording From CDs Recording From CDs 7 Reverse the tape to side B and press H or X on the player to resume playing the remaining tracks. To cancel Time Edit Press CONTINUE. z You can program the tracks you want in advance Create a program selecting the desired tracks, then follow Steps 2 to 7. Be careful that the total playing time of the program does not exceed the tape length of one side. z You can freely specify the tape length Set the tape length using the l AMS L control. Example: When the tape length of one side is 30 minutes and 15 seconds 1 To set the minutes, turn l AMS L until “30” appears in the display, then push l AMS L. 2 To set the seconds, turn l AMS L until “15” appears in the display, then push l AMS L. z You can check and change the program See page 13. Fading In or Out You can manually fade in or out to prevent tracks from starting or ending abruptly. Note that you cannot use this effect when you use the DIGITAL OUT (OPTICAL) connector. EDIT/TIME FADE HX FADER m/M To Press FADER Start play fading in During pause. “FADE” flashes, then the play fades in. End play fading out When you want to start fading out. “FADE” flashes and the play fades out. Then the player pauses. Note Fading lasts for about 5 seconds. However, when you press the FADER button during Music Scan (see page 10), the play fades out for about 2 seconds. Fading out at the specified time (Time Fade) You can have the player fade out automatically by specifying the playing time. Once you set the Time Fade, it works twice, that is, the play fades out at the end of both sides of a tape. 1 Press EDIT/TIME FADE repeatedly before you TIME A start playing until and appear in the display. FADE 2 Press m or M to specify the playing time. Each time you press these buttons, the display changes as shown below, with the playing time of one side following each indication. t C-46 y C-54 y C-60 y C-74 y C-90 y - -. - -T (23.00) (27.00) (30.00) (37.00) (45.00) (Continued) Recording From CDs 3 Press H to start playing. At the specified time the play fades out and the player pauses. B appears in the display. 4 Reverse the tape to side B and press H or X on the player to resume playing the remaining tracks. Again, the play fades out at the specified time. To cancel Time Fade Press EDIT/TIME FADE. z You can freely specify the playing time See “You can freely specify the tape length” on page 15. z You...

Descargar ahora

Introduzca dos números de la imagen: