Votos - , Puntuación media:
(
)
)
Fabricar: Cary Audio Design
Tamaño del archivo: 873.87 kb
Nombre del archivo: 17054f58-1384-1ff4-51b9-88a4a3686c9c.pdf
Idioma del manual:
El documento se está cargando, por favor, espere
 |
El documento se está cargando, por favor, espere
Resumen del manual
If they are different, wire the XLR cable so that the appropriate input pin connects to the equivalent input pin. Pin 1: Signal ground Pin 2: Signal + (non-inverting) Pin 3: Signal - (inverting) Connector ground lug: chassis ground Refer to your digital source's operating manual to verify that the XLR pin assignments of its input connectors correspond to the CD 306 SACD. If they are different, wire the XLR cable so that the appropriate output pin connects to the equivalent output pin. 12 CONTROLS AND DISPLAYS REMOTE CONTROL This section explains how best to use the remote control to set up and operate the CD 306 SACD Pro. 1. POWER: Use to turn the power on and off. 2. PROGRAM: Use to preset tracks to be played by keying in track numbers. When operating the PROGRAM function, the player must be in STOP mode. 3. NUMBER: Use the number buttons to select the desired track. Playback starts from the selected track. 4. TIME: Use to display the remaining time of a track or it displays the total remaining time of a disc. 5. STOP: Use to stop play. 6. BRIGHT: Use to select the player display’s brightness level. 7. PREVIOUS: Use to jump to the start of the previous track. 8. TEXT DISPLAY: Use this function to display the test information on the disk. 9. ANALOG UPSAMPLING MODE: Use to select the analog sample-rate converter mode. 10. CD/SACD: Use to select the source material. 11. COAXIAL: Use to select the program source connected to the digital input jack (COAXIAL). 12. D-SRC: Use to select the digital sample-rate converter mode. 13. DELETE: Use to clear a program 14. PAUSE: Use to interrupt play. Resume play. 15. FORWARD: Use to search for a passage. 16. PLAY: Use to start play. 17. REVERSE: Use to search for a passage. 13 CONTROLS AND DISPLAYS 18. MUTE: Use to mute sound. Press to resume sound. 19. RANDOM: Use to play all the tracks on the disc once in random order. 20. REPEAT: Use to repeat play. Press once for single track, press 2nd time to repeat ALL, press 3rd time to clear. 21. OPEN/CLOSE: Use to open and close the disc holder. 22. CD/SACD: Use to select the hybrid disc of the SACD layer or CD layer. 23. NEXT: Use to select another track during play. 24: SACD 2CH/MULTI CH: Use to select the 2 channel or multi channel layer on the SACD disc. 25. AES/EBU: Use to select the program source connected to the digital input jack (AES/EBU). 26. TOSLINK: Use to select the program source connected to the digital input jack (TOSLINK). 27. Not used on the CD 306 SACD Professional Version 14 PLAYBACK NORMAL PLAYBACK Setting the Top Priority Playback layer for Super Audio CD • The SACD disk layer for top priority playback after the disc is loaded can be set. • The SACD disk layer set for top priority playback upon shipment from the factory (default setting) is the Super Audio CD (stereo) layer. 1. Press the POWER button to turn on the power. 2. Check that the disc is loaded. • If the SACD disk layer is switched while the disc is being loaded, the playback layer switches for that disc, but the top priority playback layer setting itself does not change. 3. Press the 2CH/MULTI CHANNEL button and switch to the layer you want to set. • When a SACD disk is loaded after the setting has been made, the contents recorded on the set layer are displayed. • If a disc that does not contain the layer set for top priority playback is loaded, the contents recorded on another layer are displayed automatically. • This setting is stored in the memory and is not cleared even when the disc holder is opened or closed or the power is turned off. To change the setting, repeat the procedure above. 15 PLAYBACK STARTING PLAYBACK 1. Press the POWER button to turn on the power. 2. Press the OPEN/CLOSE button. • The disc holder opens. 3. Load the disc you want to play. 4. For Super Audio CD, use the 2CH/MULTI CHANNEL button to set the layer to be played, as necessary. 5. Press the PLAY button. • Playback starts. • Playback stops automatically after the last track on the disc has been played. STOPPING PLAYBACK 1. During playback, press the STOP button. • Playback stops. 16 PLAYBACK VARIOUS PLAYBACK FUNCTIONS 1. Playing a specific track (Remote control unit only) [Direct Play] Use the number buttons and + 10 button to select the desired track. * Playback starts from the selected track. 2. Stopping playback temporarily (Remote Control unit only) [Pause] During playback, press the PAUSE button on the remote control unit. * Playback pauses. * To resume playback from the position at which the disc is paused, press PLAY button. 3. Automatic Search 1. Press the NEXT button. (Operable with the remote control unit) * Press the button more than once to move ahead to the beginning of subsequent tracks. * When the NEXT button is pressed during random playback, the next track is selected at random and played. 2. Press the PREV. button. (Operable with the remote control unit) * Press the button more than once to move back to the beginning of previous tracks. 4. Finding ...