Iniciar sesión:
Votos - 3, Puntuación media: 3 ( )

Manual de usuario Vitek, modelo VT-1105

Fabricar: Vitek
Tamaño del archivo: 406.74 kb
Nombre del archivo: Vitek-VT-1105-Pdf-Rus.Pdf
Idioma del manual:ruen
Enlace gratuito para este manual disponible en la parte inferior de la página



Resumen del manual


Болыиевитская, 131 (3832) 12-54-00 36. Омск Космос Космический пр-т, 97А, к.4 (3919) 53-98-41 Получить информацию о других сервисных центрах Вы можете у продавца или по адресу в Интернет: 10 ALWAYS Always unplug from the socket when not in use and before cleaning. Always allow the appliance to cool before cleaning and storing. Always ensure hands are dry before handling the plug or switching on the appliance. Always store excess portion of the power cord in the storage compartment of the base unit. Always use the appliance on a dry level surface. Always carry out regular checks of the supply cord to ensure no damage is evident. Should there be any signs that the cord is damaged in the slightest degree, the entire appliance should be returned to the Customer Service Department. Always place the kettle on a flat surface and away from extreme heat. Always return the appliance after a malfunction or if it has been damaged in any manner to the Customer service department for examination, repair or adjustment as special purpose tools are required. Always exercise caution when carrying the kettle full of boiling water and when pouring from it. Always avoid excessive tilting of the kettle after filling. Always beware of steam being emitted from spout or lid especially during refilling. Always ensure kettle is switched off before removing from base unit. NEVER Never touch hot surfaces. Never use this appliance outdoors. Never immerse electrical appliances or cord set and plug in water, or any other - liquid to protect against electrical hazards. Never allow children to use this product. Close supervision is necessary when the appliance is near children. Never leave the appliance unattended when in use. Never let the cord hang over the edge of a table or counter, touch hot surfaces or become knotted. Never place this appliance on or near a hot gas or electric stove or where it could touch a heated oven or microwave oven. Never use harsh, abrasive or caustic cleaners or oven cleaners to clean this appliance. Never use this appliance for other than intended use. This appliance is for household use only. Never use any appliance with a damaged cord or plug, after it has malfunctioned or been damaged in any way. Never open the lid during boiling cycle. Never fill above “max” indication as hot water may be ejected. Never fill kettle when positioned on base. Never allow kettle to boil dry. Allow to cool, unplug and refill with cold water. Never operate kettle if water level is below minimum. Never use a base unit other than the one supplied. Never insert any object into slots or holes of the kettle. Never use the kettle to heat anything other than water. During normal use, whenever the Kettle remains plugged into a suitable power outlet the handle will feel slightly warm. There is no need for concern as this is part of the normal operation of the appliance. LIGHTING SEQUENCE Kettle off Boll only Boll and keep warm Keep warm only Boll dry Indication No illumination Internal chamber illuminated. Red LED indicators illuminated (Not flashing) Internal chamber illuminated, LED indicators flash gently LED indicators flash gently Illumination of internal chamber. LED red lights illuminated 3 1105.qxd 12.03.03 11:48 Page ~Q- ENGLISH BEFORE USING YOUR KETTLE Remove any packaging material from the kettle. Before connecting to a power source, make sure your mains supply voltage is the same as the one indicated on the bottom label of this appliance. Fill the kettle to the maximum mark (without the base unit). Bring to the boil and then discard the water. Repeat this procedure two more times. This removes any residues that may have remained from the manufacturing process. Remove and rinse the filter before use. NOTE: PLEASE REMOVE ALL LABELS BEFORE USE. HOW TO USE - CONVENTIONAL BOILING MODE Plug the kettle into a suitable power outlet. Ensure the On/Off switch is in the Off position ("O"). In addition check that the “Power On” blue LED indicator light, visible through the water window, is not illuminated and the red LED status indicators are not flashing. If the red LED status indicators are flashing press the Keep Warm button to switch them off. Remove the kettle from the base. Open the lid by depressing both lid release buttons simultaneously and gripping the central rib. Lift the hinged lid backwards. Alternatively the kettle can be filled through the spout. Observe the maximum level indicators, marked on the water window to prevent overfilling. Fill the kettle with no less than the minimum (0.5L) and no more than the maximum amount (1,7L) of water. Ensure the kettle is not overfilled by checking the water level with the kettle placed on a dry, level surface. Check the lid is fully closed to ensure correct operation of the kettle. Place the kettle back on to the power base ensuring the kettle is not overfilled by checking the water level. Switch the kettle or by p...


Comentarios



Tu reseña
Tu nombre:
Introduzca dos números de la imagen:
capcha





Categoría