Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
Do not let too many other appliances draw power from the same circuit while the kettle is being used. . Keep the kettle and the cord out of the reach of children. . Excess cord can be stored in or around the base of the kettle. . Boiling water can cause serious burns. Please take care when the kettle contains hot water. . Directly removing the lid after brewing can cause hot steam coming out of the kettle. . Only use the kettle in combination with its original base. . If your kettle is damaged in any way, please contact a service centre authorised by Philips. Do not attempt to make any repairs yourself. Boil-dry protection The heating element of your kettle is protected by a safety cut-out device.This device will automatically switch the kettle off if it is accidentally switched on without any water or with insufficient water. The on/off switch will stay in the 'I' position and the pilot light, if available, will stay on. Please switch the kettle off and wait 10 minutes for the kettle to cool down. Then lift the kettle from its base to reset the boil-dr y protection.The kettle is ready for use again. Using the kettle 1 Place the kettle base on a flat surface and put the plug in the wall socket. 2 Fill the kettle with water either through the spout or through the open lid 3 Close the lid. Make sure that the lid is properly closed to prevent the kettle from boiling dr y. 4 Set the on/off switch to on (1) The kettle star ts heating up. For kettles without a base 1 2 Close the lid. Put the plug in the wall socket The kettle star ts heating up. Only for metal kettles Be careful, the body of a metal kettle becomes hot! . The kettle switches off ('O' position) automatically when the water has reached boiling point. . You can interrupt the boiling process by setting the on/off switch to 'O'. Cleaning and descaling the kettle 1 Remove the plug from the wall socket. 2 Clean the outside of the kettle with a soft, damp cloth moistened with warm water and some mild cleaning agent. Do not use any abrasive cleaning agents, scourers etc. to clean the kettle. Never immerse the kettle or its base in water. . Regular descaling will prolong the life of the kettle. In case of normal use (up to 5 times a day), the following descaling frequency is recommended: 1) once ever y 3 months for soft water areas (up to 18 dH) 2) once ever y month for hard water areas (more than 18 dH) Descaling the kettle 1 Fill the kettle with water up to three-quarters of the maximum level and bring the water to the boil. 2 After the kettle has switched off, add white vinegar (8%) to the maximum level. 3 Leave the solution in the kettle overnight. 4 Empty the kettle and rinse the inside thoroughly. 5 Fill the kettle with clean water and boil the water. 6 Empty the kettle and rinse it with clean water again. . Repeat the procedure if there is still some scale in the kettle. . You can also use an appropriate descaler. Cleaning the filter Scale is not harmful to your health but it may give your drink a powder y taste. The scale filter prevents scale par ticles from ending up in your drink. Models with a double-action filter and triple-action filter have also been equipped with a mesh that attracts scale from the water. Clean the scale filter regularly. . The mesh of the double-action filter is to be cleaned by squeezing and rotating it under a running tap. . The triple-action filter can be cleaned as follows: 1) Remove the basket from the filter by sliding it. 2) Take the stainless steel mesh out of the basket and clean it by squeezing and rotating it under a running tap. . You can also clean the scale filter by leaving it in the kettle during descaling the whole appliance. . All filters can be cleaned under a running tap while gently brushing the filter with a soft nylon brush. . All filters can also be cleaned in the dishwasher. Replacement Replacement filters for Philips kettles can be purch...
Otros modelos de este manual:hervidoras - HD4640/20 (260.79 kb)