Votos - 3, Puntuación media: 3.3
(
)
)
|
Resumen del manual
Hold down for Rapid Review. finish of a particular event. S3 – Set field to Desired Setting **Reset before 30 hrs. (end of range) and S2 – Start S4 – Exit Setting Function rollover. ACCUSPLIT, Inc. • 6120 Stoneridge Mall Rd., Suite 210 • Pleasanton, CA 94588 USA 800-965-2008 • 925-226-0888 • FAX 925-463-0147 • • support@ACCUSPLIT.com DUAL SET-POINT TIMER The watch has a count-down timer that alarms when time is elapsed. The timer has two set-points, so that you can set alternating intervals for training. This is how the display looks in Timer Mode. 0:00: 100:00:08.8 ACCUSPLIT. S1/S4S2 AOS LEL S3M940MX TURBO 5 2 STOPNumber of Set Point Cycles Number Completed (1 or 2) Set Point for timer Watch is in Time Countdown Remaining Timer Mode Timer Set Instructions S1 (2 sec) - Enter set function OR S1 (4sec) - Enter set function & clear the current settings S2 select field to be set (selected field will flash) S3 Set field to desired settings S4 exit setting function Fields to set are Hours, tens of minutes, minutes, tens of seconds, and seconds for First Inteval (Set Point), then same sequence for Second Interval, then repeat. The timer intreprets 0:00:00 as 30:00:00, so set both Set Points to the same value if you want to repeatedly countdown only one interval. Count Down or Count Up Timer Operating Instructions S2 - Start. Top line of display shows which Set Point (1 or 2) you are timing. The middle line shows the Time Interval for the current Set Point. The bottom line of display shows the Time Remaining (count down) for this Set Point. S2 - Stop (Display also shows “STOP”) S2 (2sec) - Reset to beginning At end of the first time Interval, alarm sounds for 5 seconds, and then the watch begins counting down from the second Set Point. The timing cycle repeats (Set Point #1, then Set Point #2, etc.) until manually stopped. TIME OF DAY MODE The watch keeps track of two complete sets of time/day/date/alarm info (T1 and T2). “T2” shows when the watch is in Time-of-Day mode #2. This is how the Month, Date, and Day Indicates Watch in Time- of-Day Mode 2 Time display looks in Time-of-Day Mode: 3-30 th 9:25:44 ACCUSPLIT. S1/S4S2 AOS LEL S3 M 940MX TURBO T2Setting the Time of Day, Day-Date, and Alarms Press (repeatedly until you are in T1 or T2, as desired. S1 (2 sec) - Enter Set function S2 - select field to be set (field will flash) S3 - Set field to desired settings Using Time of Day, Day, Date & Alarm Functions S3 - Alternates between Alarm & Day- Date Display Any button - Stops alarm sound While in Alarm Display: S2 - Changes Alarm & chime arm status: Each press rotates through Alarm only (display shows 1), Hourly chime (display shows +), or Both, then neither. Power Reset: • Push and hold S2 and S3 - Display turns OFF • Release all - Display shows all segments ON then displays stopwatch at 0:00:00.00 Changing the Battery When Low-Battery Indicator is “ON,” replace the unit’s battery with a new Type CR2016 Lithium cell, or equivalent. PERFORMANCE SPECIFICATIONS Stopwatch Performance Function & Features • 50 Dual Distance Split Automatic Memory • Hour, Minute, Second to 1/100 Sec • Speed & Rate Computations (Hr & Min) (TURBO) • Computers & Recalls Ave Speed/Rate (TURBO) • 30 Hour Range • Computers & Recalls Average Lap Split • Anytime Memory Review • Rapid Memory Review • FIFS (First In First Saved) Memory • LIFO (last in First out) Memory • Display True Split Count • 1-Button Rapid Split & Reset Action • Dual Split Timing • Split Counter to 999 with Rollover • Return to Running Dual Split Timer Performance Function & Features • Dual Set-Point Timer Interval Memories • Auto Repeat of Dual Interval Timer • Display “1” or “2” for work or Rest part of Cycle • Display Current Cycle Count • 30 Hour Range (0:00:00=30:00:00) • Hours, Minutes, Seconds Setting • Hours, Minutes, Seconds, 1/10 Sec Timing Display Time of Day and Time of Day Alarm Functions and Features • Time Day-Month, Day, Alarm • 2nd Time, Date-Month, Day, Alarm • Hourly Chime General Performance Features • 5 year NO-PROOF OF PURCHASE Warranty • NO-FAIL, Million – Cycle Switches • Bold, Easy-to-Read Digits • 60 degree Comfort Viewing Angle • Water Resistant • Shock Resistant • 32,768Hz Quarts Crystal accuracy to +or- 0.01 sec/hr • 1.5 Year Battery Life • Low-Battery Indicator • Accurate Temp: 5C-35C (41F-95F) • Operating Temp: -10C0-60C (14F-140F) REGISTER NOW. Email __________________________ Please return your A940MXT registration to the Repair Center User ___________________________ address in the warranty, and we will let you know about future products. _______________________________ NO-PROOF-OF-PURCHASE LIMITED WARRANTY See label on back of unit for details, or check http://supp...
Otros modelos de este manual:Relojes - 980-301 (226.02 kb)