Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
4 Repeat the above steps to program other stations. Tip • To over write a programmed station, store another station in its place. Select a preset radio station 1 Press to select a preset program number. 6 Other features / Set the alarm timer You can set two alarms which go off at different time. 1 Ensure that you have set the clock correctly. 2 Press and hold AL 1 or AL 2 for 2 seconds. » [AL 1] or [AL 2] begin to blink. 3 Press SOURCE repeatedly to select an alarm sound source: iPod/iPhone, iPod/iPhone playlist, FM tuner, or buzzer. 4 Press AL 1 or AL 2 . » Hour digits begin to blink. 5 Press TUNING +/- or repeatedly to set the hour. 6 Press AL 1 or AL 2 to confirm. » Minute digits begin to blink. 7 Repeat steps 5-6 to set the minute. 8 Repeat steps 5-6 to select whether to ring alarm the whole week, on weekdays, or at weekend. 9 Repeat steps 5-6 to set the alarm volume. / Tip • If you want to wake up to specific music track(s) on iPhone/iPod, af ter set iPhone/iPod playlist as the wake up source on the unit, you need to create a playlist called ‘PHILIPS’ via iTunes and copy the track(s) to this new ‘PHILIPS’ playlist. • If no playlist is created or there is no song in the playlist, the unit will play the music track according to the last music playback preference on iPhone/iPod. Activate and deactivate the alarm timer 1 Press AL 1 or AL 2 repeatedly to activate or deactivate the timer. »If the timer is activated, [ AL 1] or [ AL2] is displayed. » If the timer is deactivated, before [AL1] or [AL2] disappears. Gentle wake Gentle wake function peacefully wakes you with gently ascending alarm volume. • If selected the alarm source iPhone/iPod, iPhone/iPod playlist or FM, alarm volume will gentle increase. • If selected the alarm source Buzzer, the alarm will increases beep tone frequency within seconds. Repeat alarm 1 When the alarm rings, press BRIGHTNESS/REP ALM. » The alarm repeats ringing minutes later. Tip • You can press / to adjust the inter val to repeat alarm. Stop alarm ring 1 When the alarm rings, press the corresponding AL 1 or AL 2. » The alarm stops but the alarm settings remain. View the alarm settings 1 Press AL 1 or AL 2 . Backup Battery Mode Under normal use, the unit should be powered through the AC adapter. If the AC adapter is disconnected, the unit will automatically switch to Backup Batter y mode. Under Backup Batter y mode: • The unit displays the same as under the Standby mode, with backlight off. • Only the functions below are available: • Clock • Alarm Note • Alarm source is defaulted to ‘Buzzer’ under Backup Bat ter y mode. When AC Power is plugged back, the unit will exit Backup Battery mode and go to Standby mode. Note • Under Backup Batter y mode, the unit can work over 3 months. • When the battery power is low, the display panel will indicate “bAtt Lo” until the batteries are empty and the unit will switch off automatically. In this case, please replace the batteries in the backup battery compar tment with 2 pieces of new 1.5V, A AA /R03/UM4 batteries. Install backup batteries Caution • Risk of explosion! Keep bat teries away from heat, sunshine or fire. Never discard batteries in fire. • Risk of product damage! When the apparatus is not used for long periods, remove the batter y. 1 Open the bat ter y compar tment on the back of the unit. 2 Inser t 2 x 1.5V R03/UM-4/A A A bat teries with correct polarity. 3 Close the batter y compar tment. Note • Batteries contain chemical substances, so they should be disposed of properly. Set the sleep timer This unit can switch to standby automatically after a set period of time. Note • Make sure the time and date is set before setting the sleep timer. 1 Press SLEEP repeatedly to select a set period of time (in minutes). » The sleep timer is activated » The display shows » The volume star ts to decrease gradually from the last 5 minutes of sleep timer » The unit switches to standby when reaches the set time. To deactivate sleep timer1 Press SLEEP repeatedly until [OFF] displays. » disappears on the display. Adjust display brightness 1 Press BRIGHTNESS/REP ALM repeatedly to select different levels of display brightness. 7 Adjust sound Adjust volume level 1 During play, press VOL +/- to increase/decrease the volume level. Enhance bass 1 During play, press DBB to turn on or off dynamic bass enhancement. » If DBB is activated, [DBB 1] is displayed. » If DBB is de-activated, [DBB 0] is displayed. 8 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 2. 5 W RMS Frequency Response 125 Hz - 16 kHz, ±3 dB Signal to Noise Ratio >55 dB MP3 link 500 mV RMS 10 kohm Tuner FM Tuning Range Tuning grid Sensitivity - Mono, 26dB S/N Ratio - Stereo, 46dB S/N Ratio Search Selectivity Total Harmonic Distor tion 87.5 - 108 MHz 50 KHz <22 dBu <45 dBu <36 dBu <3% Signal to Noise Ratio >45 dB General information AC power AS190 -090 -AE180; (power adaptor) Input: 100-240 V~, 50/60Hz,...