Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
If damage is caused by failure equipment. to follow the instructions, the warranty does • If the product is transpor ted in not apply. temperatures below 5°C, unpack the Risk of electric shock or fire! • Never expose the product and accessories to rain or water. Never place liquid containers, such as vases, near the product. If liquids are spilt on or into the product, disconnect it from the power outlet immediately. Contact Philips Consumer Care to have the product checked before use. • Never place the product and accessories near naked flames or other heat sources, including direct sunlight. • Never inser t objects into the ventilation slots or other openings on the product. • Where the mains plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. • Disconnect the product from the power outlet before lightning storms. • When you disconnect the power cord, always pull the plug, never the cable. Risk of short circuit or fire! • Before you connect the product to the power outlet, make sure that the power voltage matches the value printed on the back of the product. Never connect the product to the power outlet if the voltage is different. • Never expose the product to rain, water, sunshine, or excessive heat. • Avoid force coming onto power plugs. Loose power plugs can cause arcing or fire. Risk of injury or damage to the product! • This product shall not be exposed to dripping or splashing! product and wait until its temperature matches room temperature before connecting it to the power outlet. Risk of overheating! • Never install this product in a confined space. Always leave a space of at least four inches around the product for ventilation. • Make sure that cur tains or other objects never cover the ventilation slots on the product. Note • The rated power voltage and frequency are printed on the back of the product. The model number and serial number are printed on the bottom. EN 2 What's in the box Check and identify the contents of the package: User Manual OR2000M EN 3 3 Connect power Connect the power plug to the AC power outlet. EN 4 Power on Turn the left knob clockwise until you hear a "click" sound. • To power off, turn the left knob anti- clockwise until you hear a "click" sound. EN 5 Adjust volume • To increase the volume, turn the left knob clockwise. • To decrease the volume, turn the left knob anti-clockwise. EN 6 Listen to radio Note • For optimal reception, fully extend the antenna and adjust its position, or connect an outdoor antenna. 1 Press down FM/MW to switch the tuner band to MW. • To switch the tuner band to FM, press FM/MW again to release it. 2 Turn the right knob anti-clockwise or clockwise to adjust the frequency. » The red LED bar points at the current frequency. EN 7 Listen to an external device You can also listen to an external audio device, for example, MP3 player, through this product. 1 Connect an audio input cable with a 3.5 mm connector on both ends to • the AUDIO-IN socket on the back panel of this product, and • the headphone socket on the external device. 2 Play audio on the external device (refer to its user manual). Note • If you want to listen to radio, disconnect the audio input cable from the product. EN 8 Troubleshooting Warning • Never remove the casing of this product. To keep the warranty valid, never tr y to repair the product yourself. If you encounter problems when using this product, check the following points before requesting ser vice. If the problem remains unsolved, go to the Philips Web page (philips.com/suppor t). When you contact Philips, make sure that the product is nearby and the model number and serial number are available. No power • Make sure that the AC power cord is properly connected. • Make sure that there is power at the AC power outlet. No sound • Adjust the volume. • When listening to an external device, make sure that the external device is not muted. • When listening to radio, make sure that the audio input cable is disconnected from the AUDIO-IN socket on the back of this product. No response from the product • Make sure that the power is available. • Power off the product, and then power on again. Poor radio reception • Due to the interference from other electrics or building obstacles, the signals become weak. Move the product to a place free of interference. • Make sure that the antenna is fully extended. Adjust the position of the antenna. EN 9 Product information Note • Product information is subject to change without prior notice. General information AC Power Rating 220-240 V~, 50 Hz Operation Power Consumption 9 W Dimensions (Main Unit) 245 x 123 x 122 mm Weight (Main Unit) 1.33 kg Tuner Tuning Range FM: 87.50 - 108.00 MHz; MW: 531 - 1,602 kHz Total Harmonic Distor tion < 2% Signal to Noise Ratio > 50 dBA Speakers Speaker Impedance 8 Ohm Speaker Driver 3" full range Sensitivity > 82 dB/m/W Amplifier Output Power 3 W RMS Frequency Response 60 Hz - 16 kHz, ±3 dB ...