Votos - 0, Puntuación media: 0
(
)
)
|
Resumen del manual
c Turn on Press POWER. » The clock radio switches to the last selected source. Switch to standby mode Press and hold POWER for 3 seconds. » The clock (if set) appears on the display panel. Set time 1 In standby mode, press and hold INFO for 3 seconds to activate the time setting mode. (Fig. ) » The hour digits blink. 2 Press / to adjust the hour. 3 Press INFO to confirm. » The minute digits blink. 4 Repeat steps 2-3 to set the minute. 5 Repeat steps 2-3 to set the day, month, and year. EN 4 e 3 sec. Tip • To adjust the 12/24 hour format, see "Use system menu" > "Set hour format and synchronize time". • When being idle for 10 seconds, the clock radio exits clock setting mode automatically. 4 Listen to DAB+ radio Digital Audio Broadcasting (DAB+) is a way of broadcasting radio digitally through a network of transmitters. It provides you with more choice, better sound quality and more information. For the first time use 1 Press SOURCE repeatedly to select DAB+ radio. » [FULL SCAN] (full scan) is displayed. 2 Press SELECT to star t full scan. » The clock radio stores all DAB+ radio stations automatically and then broadcasts the first available station. » The station list is memorized in the clock radio. When you turn on the unit next time, the station scan does not take place. » If no DAB+ station is found, [No DAB Station] (no DAB station) is displayed. To tune to a station from the station list: In DAB+ mode, press TUNING / repeatedly to navigate through the available DAB+ stations. » If the signal of the DAB+ radio station is too weak, [OFF AIR] (off air) is displayed. Store DAB+ radio stations automatically Tip • New stations and ser vices will be added in the DAB+ broadcast.To make new DAB+ stations and ser vices available, perform full scan regularly. 5 EN In DAB+ mode, press and hold SCAN for 3 seconds. Use DAB+ menu » The clock radio stores all the available DAB+ radio stations automatically. » After full scan, the first available station is broadcast. Store DAB+ radio stations manually You can store up to 10 DAB+ radio stations. 1 Tune to a DAB+ radio station. 2 Press and hold PRESET for 3 seconds to activate the storing mode. 3 Press TUNING / to select a number. » The preset number is displayed for one second.Then if this position is occupied, the previously stored DAB+ station name will be displayed; if this position is empty, [Empty] will be displayed. 4 Press PRESET to confirm. 5 Repeat steps 1-4 to store other DAB+ stations. Note • To remove a pre-stored DAB+ radio station, store another station in its place. Listen to a preset DAB+ radio station In DAB+ mode, press PRESET repeatedly to select a preset radio station. 1 In DAB+ mode, press and hold MENU for 3 seconds to access DAB+ menu. 2 Press TUNING / to scroll through the menu options: • [STATION]: Display a list of available DAB+ stations. • [FULL SCAN]: Scan and store all available DAB+ radio stations. • [MANUAL]: Tune to a specific channel/ frequency manually and add it to the station list. • [DRC] (Dynamic Range Control): Add or remove a degree of compensation for differences in the dynamic range among DAB+ stations.You may experiment the options on different source materials to decide which option suits best. • [PRUNE]: Remove invalid stations from the station list. • [SYSTEM]: Adjust system settings (see the Chapter "Use system menu"). 3 To select an option, press SELECT. 4 Repeat steps 2-3 if sub-option is available under one option. [DRC] • [DRC OFF]: No compensation applied. • [DRC HIGH]: Maximum compensation applied (the default option recommended for noisy environment). • [DRC LOW]: Medium compensation applied. [PRUNE] • [PRUNE N]: Return to the previous menu. • [PRUNE Y]: Remove invalid stations from the station list. EN 6 Show DAB+ information While listening to DAB+ radio, press INFO repeatedly to scroll through the following information (if available): » Station name » Dynamic Label Segment (DLS) » Signal strength » Program type (PTY) » Ensemble Name » Frequency » Signal error rate » Bitrate » Codec » Time and date 5 Listen to FM radio Tune to FM radio stations 1 Press SOURCE repeatedly to select FM radio. 2 Press and hold TUNING / for 3 seconds. » The FM tuner tunes to a station with strong reception automatically. To tune to a radio station manually: Press TUNING / repeatedly to tune to a radio station. Store FM radio stations automatically In FM tuner mode, press and hold SCAN for 3 seconds. » The clock radio stores all the available FM radio stations automatically. » The first stored radio station is broadcast. Store FM radio stations manually You can store up to 10 FM radio stations. 1 Tune to an FM radio station. 2 Press and hold PRESET for 3 seconds to activate the storing mode. 3 Press TUNING / to select a number. » The preset number is displayed for one second.Then if this position is occupied, the previously stored radio frequency will be displayed; if this position is empty, [Empty] will be displayed. 7 EN 4 Press PRES...