Votos - 3, Puntuación media: 4
(
)
)
|
Resumen del manual
To specify a countdown start time of 24 hours, set•. Press4. A to exit the setting screen. •You can also perform steps 1 and 2 of the above procedure whenever you need to view the current auto-repeat and progress beeper settings. To use the countdown timer Press D while in the Countdown Timer Mode to start the countdown timer. The countdown timer operation continues even if you exit• the Countdown Timer Mode. Press•D while a countdown operation is in progress to pause it. Press D again to resume the countdown. To stop a countdown operation completely, first pause• it (by pressing D), and then press A. This returns the countdown time to its starting value. Alarms Alarm number Alarm date (Month – Day) Alarm time (Hour : Minutes) You can set up to three independent multi-function alarms with hour, minutes, month, and day. When an alarm is turned on, the alarm tone sounds when the alarm time is reached. One of the alarms is a snooze alarm, while the other two are one-time alarms. You can also turn on an Hourly Time Signal that causes the watch to beep twice every hour on the hour. There are three alarm screens numbered•and for the one-time alarm, a snooze alarm screen indicated by . The Hourly Time Signal screen is indicated by . All of the operations in this section are performed in the• Alarm Mode, which you enter by pressing C. Alarm Types The alarm type is determined by the settings you make, as described below. Daily alarm• Set the hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set. Date alarm• Set the month, day, hour and minutes for the alarm time. This type of setting causes the alarm to sound at the specific time, on the specific date you set. 1-Month alarm• Set the month, hour and minutes for the alarm time. This type of setting causes the alarm to sound everyday at the time you set, only during the month you set. Monthly alarm• Set the day, hour and minutes for the alarm time. This type of setting causes the alarm to sound every month at the time you set, on the day you set. To set an alarm time In the Alarm Mode, use1. D to scroll through the alarm screens until the one whose time you want to set is displayed. Press D. To set a one-time alarm, display an alarm screen•or . To set the snooze alarm, display the screen. The snooze alarm repeats every five minutes.• After you select an alarm, hold down2. A until the hour setting of the alarm time starts to flash, which indicates the setting screen. •This operation turns on the alarm automatically. 2 Operation Guide 3247 To toggle a city code time between Standard Time and Daylight Saving Time DST indicator In the World Time Mode, use1. D to display the city code (time zone) whose Standard Time/Daylight Saving Time setting you want to change. Hold down2. A for about one second to toggle Daylight Saving Time (DST indicator displayed) and Standard Time (DST indicator not displayed). The DST indicator is on the display whenever you display• a city code for which Daylight Saving Time is turned on. Note that the DST/Standard Time setting affects only• the currently displayed city code. Other city codes are not affected. Stopwatch 1/100 second Hours Minutes Seconds The stopwatch lets you measure elapsed time, split times, and two finishes. It also includes Auto-Start. The display range of the stopwatch is 23 hours,• 59 minutes, 59.99 seconds. The stopwatch continues to run, restarting from zero• after it reaches its limit, until you stop it. The stopwatch measurement operation continues even if• you exit the Stopwatch Mode. Exiting the Stopwatch Mode while a split time is frozen• on the display clears the split time and returns to elapsed time measurement. All of the operations in this section are performed in the• Stopwatch Mode, which you enter by pressing C. To measure times with the stopwatch Elapsed Time DDDDAStart Stop Re-start Stop Clear Split Time DAADAStart Split ( displayed) Split release Stop Clear Two Finishes DADAAStart Split First runner finishes. Display time of first runner. Stop Second runner finishes. Split release Display time of second runner. Clear The time on the screen may not appear to stop immediately when you press a• button to stop timing or to perform a split operation. Despite this, the time recorded by your button operation is accurate. About Auto-Start With Auto-Start, the watch performs a 5-second countdown, and stopwatch operation starts automatically when the countdown reaches zero. During the final three seconds of the countdown, a beeper sounds with each second. To use Auto-Start While the stopwatch screen is showing all zeros in the1. Stopwatch Mode, press A. This displays a 5-second countdown screen.• To return to the all zeros screen, press•A again. Press2. D to start the countdown. When the countdown reaches zero, a tone sounds and a• stopwatch timing operation starts automatically. Pressing•D while the Auto-Start countdown is in progress starts the stopwatch i...